S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsConcrete Drill Bits
Specifications
Depth | 0.15625 in. |
Height | 3.50 in. |
Width | 0.15625 in. |
Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
Packaging Quantity | 1 |
Specifications
Depth | 0.15625 in. |
Height | 5.50 in. |
Width | 0.15625 in. |
Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
Packaging Quantity | 1 |
Features
- Fastest drilling compared to other Milwaukee diamond core bits
- Maximum run time
- Ideal for concrete and concrete with rebar
- Thin 3 mm Kerf delivers faster holes
- Top quality diamonds
- 10mm segment height
- 1-1/4 in. to 7 thread connection
- Designed to be used wet
- 16 in. drilling depth
- Max RPM - 1315
Specifications
Bit Diameter | 2 |
Length | 18.701 Inches |
Bit Material | Diamond Coated |
Chuck Fitment | Hex |
Package Contents | (1) Core Bit |
Bit Type | Core |
Drilling Depth (in) | 13 |
Wet or Dry Application | Wet |
Maximum RPM | 1315 |
Segment Height (in) | 0.39 |
Recommended Safety Equipment | Safety Glasses |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
Diameter | 1/2" |
Length | 6" |
Number of Cutters | 4 |
Pack Quantity | 25 |
Shank | SDS Plus |
Head Type | Full Carbide Head |
Working Length | 4" |
Simpson Strong-Tie offers a complete line of premium-quality drill bits, core bits and chisels to handle any drilling and demolition need. SDS-max shank bits have a chisel-shaped drill bit head which penetrates the material and directs concrete dust into the multi-flute spiral. The proprietary flute geometry reduces vibration and optimizes impact energy transfers from the rotary hammer into the drill bit tip which enhances drilling speed and durability and reduces noise, stress and vibration on the operator. All the features of single-cutter bits are designed to improve durability and drilling speed.
Specifications
Depth | 0.50 in. |
Height | 21 in. |
Width | 0.50 in. |
Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
Packaging Quantity | 1 |
Specifications
Height | 1.000 IN |
Length | 7.250 IN |
Width | 1.000 IN |
Weight | 0.100 LB |
Type | ADHESIVES: CHEMICAL |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
Diameter | 1/4" |
Length | 8" |
Number of Cutters | 4 |
Pack Quantity | 25 |
Shank | SDS Plus |
Head Type | Full Carbide Head |
Working Length | 6" |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrills
Specifications
Bit Diameter | 3/4" |
Bit Material | Carbide Tipped |
Case Included | No |
Chuck Fitment | Standard Chuck |
Shank Style | Straight |
Bit Type | Percussion |
Flute Length (in) | 4.0 |
Length (in) | 6.0 |
Package Contents | 1-drill bit |
Shank Diameter (in) | 0.25 |
Color Coded | No |
Etched / Stamped Size Identification | No |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Three flats on shank eliminate bit slipping in chuck
- Four flute design cleans debris out for fast, efficient drilling
Specifications
Height | 0.640 IN |
Length | 8.210 IN |
Width | 1.870 IN |
Weight | 0.310 LB |
Type | DRILL BITS: MASONRY |
Unit Of Measure | SAE |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Three flats on shank eliminate bit slipping in chuck
- Four flute design cleans debris out for fast, efficient drilling
Specifications
Height | 0.500 IN |
Length | 14.250 IN |
Width | 1.875 IN |
Weight | 0.230 LB |
Type | DRILL BITS: MASONRY |
Unit Of Measure | SAE |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrills
Specifications
Bit Diameter | 1/2" |
Bit Material | Carbide Tipped |
Case Included | No |
Chuck Fitment | Standard Chuck |
Shank Style | Straight |
Bit Type | Percussion |
Flute Length (in) | 4 |
Length (in) | 6 |
Package Contents | 1-bit |
Shank Diameter (in) | 0.25 |
Color Coded | No |
Etched / Stamped Size Identification | No |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck
- For use with electric or cordless hammerdrills
Specifications
Height | 0.380 IN |
Length | 14.250 IN |
Width | 1.875 IN |
Weight | 0.270 LB |
Type | DRILL BITS: MASONRY |
Unit Of Measure | SAE |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrills
Specifications
Height | 0.400 IN |
Length | 8.500 IN |
Width | 1.875 IN |
Weight | 0.140 LB |
Type | DRILL BITS: MASONRY |
Battery Included | No |
Net Lit-Ion Y/N | No |
Unit Of Measure | SAE |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrills
Specifications
Height | 0.250 IN |
Length | 14.250 IN |
Width | 1.875 IN |
Weight | 0.130 LB |
Type | DRILL BITS: MASONRY |
Unit Of Measure | SAE |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck
- For use with electric or cordless hammerdrills
Specifications
Height | 0.300 IN |
Length | 8.500 IN |
Width | 1.800 IN |
Weight | 0.078 LB |
Type | DRILL BITS: MASONRY |
Battery Included | No |
Net Lit-Ion Y/N | No |
Unit Of Measure | SAE |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck
- For use with electric or cordless hammerdrills
Specifications
Bit Diameter | 0.3125 |
Bit Material | Carbide Tipped |
Case Included | No |
Chuck Fitment | Standard Chuck |
Shank Style | Straight |
Bit Type | Percussion |
Flute Length (in) | 4.0 |
Length (in) | 6.0 |
Package Contents | 5/16 X 6 MASON Drill Bit |
Recommended Safety Equipment | Safety glasses and gloves |
Shank Diameter (in) | 0.5 |
Color Coded | No |
Etched / Stamped Size Identification | Yes |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck
- For use with electric or cordless hammerdrills
Specifications
Bit Diameter | 0.1875 |
Bit Material | Carbide Tipped |
Case Included | No |
Chuck Fitment | Standard Chuck |
Shank Style | Straight |
Bit Type | Percussion |
Flute Length (in) | 4.0 |
Length (in) | 6.0 |
Package Contents | 5/32X6 Premier Percussion Drill Bit |
Recommended Safety Equipment | Safety glasses and gloves |
Shank Diameter (in) | 0.5 |
Color Coded | No |
Etched / Stamped Size Identification | Yes |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrill
Specifications
Bit Diameter | 3/16 |
Bit Material | Carbide Tipped |
Case Included | No |
Chuck Fitment | Standard Chuck |
Shank Style | Straight |
Bit Type | Percussion |
Flute Length (in) | 4.0 |
Length (in) | 6.0 |
Package Contents | 1 bit |
Recommended Safety Equipment | Safety glasses |
Shank Diameter (in) | 0.1875 |
Color Coded | No |
Etched / Stamped Size Identification | Yes |
Features
- Wide range of product offerings for the most common concrete demolition jobs
Specifications
Height | 13.74 IN |
Length | 1.85 IN |
Width | 1 IN |
Weight | 0.57 LB |
Type | CHISELS: COLD |
Battery Included | No |
Net Lit-Ion Y/N | No |
Warranty | 30DLW |
Primary Material | High Speed Steel |
Unit Of Measure | SAE |
Features
- Wide range of product offerings for the most common concrete demolition jobs
Specifications
Height | 14.000 IN |
Length | 1.850 IN |
Width | 0.570 IN |
Weight | 0.650 LB |
Type | CHISELS: SCALING |
Battery Included | No |
Net Lit-Ion Y/N | No |
Warranty | 30DLW |
Primary Material | High Speed Steel |
Unit Of Measure | SAE |
Features
- Wide range of product offerings for the most common concrete demolition jobs
Specifications
Height | 13.740 IN |
Length | 1.850 IN |
Width | 1.000 IN |
Weight | 0.550 LB |
Type | CHISELS: BULL POINT |
Warranty | MWC |
Primary Material | High Speed Steel |
Unit Of Measure | SAE |
DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.
Features
- Strong core: Tapered core for bit strength and maximum durability, especially when drilling deep holes
- Aggressive material removal: Two stage flute design with variable helix pattern allows for efficient debris removal
- Clean, round holes: Two sharp cutting edges for true holes
- Wear mark indicator: For accurate diameter of holes
- NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5400, DW5401, DW5401B25)
Specifications
Height | 11.25 IN |
Length | 1.875 IN |
Width | 0.5 IN |
Weight | 0.46 LB |
FLUTE LENGTH | 6 in |
DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.
Features
- Strong core: Tapered core for bit strength and maximum durability, especially when drilling deep holes
- Aggressive material removal: Two stage flute design with variable helix pattern allows for efficient debris removal
- Clean, round holes: Two sharp cutting edges for true holes
- Wear mark indicator: For accurate diameter of holes
Specifications
Height | 11.000 IN |
Length | 1.850 IN |
Width | 1.000 IN |
Weight | 0.310 LB |
Type | DRILL BITS: HAMMER |
Battery Included | No |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | No |
Warranty | MWC |
Diameter | .625 IN |
Piece Count | 1 |
Primary Material | Carbide |
SDS Plus 2 Cutter Drill Bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. For optimal drilling speeds, the two-stage flute design features a variable helix pattern that quickly moves debris away from the contact zone. Plus, the two sharp, carbide-cutting edges deliver clean, round holes for secure anchor installation. These bits are made in Germany and are GUARANTEED TOUGH so tough that we are offering a NO BREAK GUARANTEE. If you have our bits, we have your back.
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
Specifications
Height | 21.25 IN |
Length | 1.85 IN |
Width | 1 IN |
Weight | 0.869 LB |
FLUTE LENGTH | 16 in |
DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.
Features
- Elongated Four Flute Helix for Faster Material Removal
- For use with electric or cordless rotary hammers.
- Increased Steel Prevents Breakage
- ROCK CARBIDE Tip for Longer Bit Life
- Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter
Specifications
Height | 15.25 IN |
Length | 1.85 IN |
Width | 1 IN |
Weight | 0.5 LB |
FLUTE LENGTH | 10 in |
Guaranteed to set up to 25% more anchors than standard masonry bits, DEWALT SDS Plus Masonry Drill Bits power through masonry, concrete, and more with a carbide tip that maximizes bit life. An elongated 4-flute helix helps to increase material removal.
Specifications
Height | 27.250 IN |
Length | 1.875 IN |
Width | 0.500 IN |
Weight | 0.630 LB |
Type | DRILL BITS: HAMMER |
Warranty | NLW |
Unit Of Measure | SAE |