S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsOutdoor Power Equipment
Whether your next project is trimming along a sidewalk, removing small trees, or cutting an acre of grass, look no further than Kinnunen. We carry a wide selection of reliable and durable outdoor power equipment to help you take on any task. So, whether you're a professional contractor or just someone who likes to take care of their own yard, Kinnunen has the right tool for you.Our professional customer service associates are ready to answer your questions about mowers, trimmers, chain saws and other types of outdoor power equipment. Call us today at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
Features
- 7- position, 180° articulating head offers customized cutting angles for hedges of any shape and size
- 1 in. cutting capacity for superior cutting performance
- Up to 12 ft. max reach
- 22 in. hardened steel laser cut dual action blade for fast cutting with 2800 spm
- 1 in. cutting gap for cutting performance on thick branches
Specifications
Height | 42.000 in |
Length | 13.125 in |
Width | 6.625 in |
Weight | 10.950 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** Based on a 6.0 ft. person holding the pole in a straightened position at shoulder level, at a 90 degree angle from the ground. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | Yes |
Assembly Required | Yes |
Bare Tool | Yes |
Blade Action | Dual |
Blade Length | 22 In |
Blade Material | Stainless Steel |
Cutting Width | 1 In |
Handle Material | Plastic |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Recommended Safety Equipment | Safety glasses and gloves |
Rust Resistant | No |
Shaft Style | Straight |
Start Type | Electric |
The Milwaukee M18 FUEL™ 16 in. Chainsaw delivers the power to cut hardwoods, cuts faster than gas, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18 user. The POWERSTATE™ brushless motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. When paired with the M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (sold separately), the unit delivers unmatched run-time in all applications. M18 FUEL™ technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity.
Features
- POWERSTATE™ Brushless motor - purposely built for the M18 FUEL™ 16 in. chainsaw to generate the power and performance of a gas engine up to 40CC
- REDLINK Plus™ intelligence - ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ system
- Compatible with all M18 REDLITHIUM™ battery packs, optimized for use with the M18 REDLITHIUM™ high output HD12.0 battery pack - provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs, superior pack construction for the industry's best protection against jobsite conditions
- 16 in. Oregon bar and chain
- Dual-stud for improved bar and chain retention
- Automatic oiler for proper chain lubrication and increased productivity
- Onboard storage for scrench
- Variable speed trigger for full control
- Compatible with 150+ M18™ tools
Specifications
Bar Length (in) | 16.0 |
Cordless / Corded | Cordless |
Weight | 10.7 lbs |
Color / Finish | Red/Black |
Chain Included | Yes |
Handle Length (in) | 6.5 |
Handle Material | Rubber |
Housing Material | Glass filled nylon |
Case Included | No |
Battery Ampere-hour (Ah) | 0.0 |
Battery Type | M18 |
Battery Voltage (V) | 18 |
Automatic Oiler | Yes |
Fully Assembled | Yes |
Low Kickback Bar And Chain | Yes |
Fuel Type | Electric |
Oil Level Sight Glass | Yes |
Replacement Chain Item Number | 49-16-2715 |
Rust Resistant | Yes |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Gloves |
Features
- QuickLoad spool feature allows for fast and easy reloading of line with a twist of the cap
- Compatible with DEWALT cordless string trimmers
- Pre-Wound Dual 0.080" Aerodynamic Line for cordless cutting efficiency also accepts DEWALT 0.095-in line
- QuickLoad Bump Head for fast and easy re-spooling
- Fits all DEWALT cordless string trimmers
Specifications
Height | 6.480 in |
Length | 9.120 in |
Width | 2.910 in |
Weight | 0.950 lbs |
Product Diameter Us | 0.875 IN |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | No |
Warranty | MWC |
Claims Needed | No |
Compatibility | Fits all DEWALT Cordless string trimmers |
Line Diameter | 0.080 In |
Universal | Yes |
The MILWAUKEE® M12™ Compact Spot Blower delivers more control and faster cleanup. It features high and low-speed settings, a lock-on button, and a variable speed trigger for increased control during jobsite cleanup. The M12™ Compact Spot Blower's compact size allows for greater access, maneuverability in tight spaces, and easy storage. The axial fan provides the best combination of power and run-time with 175 CFM and 110 MPH of air speed. The M12™ Compact Spot Blower includes two nozzles. The rubber nozzle removes debris from hard-to-reach spaces. The wide sweeping nozzle efficiently clears debris in open spaces. The M12™ Compact Spot Blower is ideal for jobsite debris removal and workbench cleanup. The M12™ Compact Spot Blower is fully compatible with 100+ solutions on the M12™ System.
Features
- More controlled, faster cleanup
- 2-Modes & variable speed trigger increase control
- Compact size & rubber nozzle for tight spaces
- Axial fan for best combination of power & run-time
- Maximum Air Speed - 110 MPH
- Maximum Air Volume - 175 CFM
- Rubber nozzle removes debris in hard-to-reach places
- Wide sweeping nozzle efficiently clears debris in open spaces
- Lock-on switch reduces user fatigue
Specifications
Length | 15.0 Inches |
Width | 4.74 Inches |
Height | 8.48 Inches |
Weight | 3.3 lbs |
Color / Finish | Red/Black |
Material | Plastic |
Fan Speeds | Not Featured |
Air Volume (CFM) | 175 |
Fan Noise Level (dBA) | 78 |
Dust Collection | No |
Odor Control | No |
Fan / Blower Outputs | Forced Draft Only |
Indoor / Outdoor | Indoor/Outdoor |
Voltage (V) | 12.0 |
Package Quantity | 1 |
Power Source | M12 Battery |
Features
- Aerodynamic line optimized for maximized runtime
- Maximizes performance and durability through a combination of flexible and impact resistant materials
Specifications
Height | 4.700 in |
Length | 4.700 in |
Width | 0.875 in |
Weight | 0.138 lbs |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | Yes |
Warranty | MWC |
Claims Needed | No |
Compatibility | DEWALT String Trimmer |
Line Diameter | 0.080 In |
Line Length | 600 In |
Recommended Safety Equipment | Safety glasses |
Features
- Aerodynamic line optimized for maximized runtime
- Maximizes performance and durability through a combination of flexible and impact resistant materials
- Used for trimming and edging grass
- Manufactured by DEWALT
Specifications
Height | 6.750 in |
Length | 6.250 in |
Width | 1.875 in |
Weight | 0.550 lbs |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | No |
Warranty | MWC |
Claims Needed | No |
Compatibility | DEWALT String Trimmer |
Line Diameter | 0.080 In |
Line Length | 2700 In |
Recommended Safety Equipment | Safety glasses |
Features
- Up to 450 CFM of air volume and up to 125 Mph with concentrator
- Innovative axial fan design that maximizes on air output and run time
- Low noise during operation - 66 dB(A), ideal for noise sensitive regions and properties
- High-efficiency brushless motor helps extend run time and motor life
- Lightweight and ergonomic design allows for easy control and arm movement
- Variable trigger and speed lock for precise power control
Specifications
Height | 23.438 in |
Length | 13.688 in |
Width | 8.625 in |
Weight | 9.450 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 1.4 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 5 Ah Ah |
Watt Hours | 100 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | No Certifications or Listings |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Hazmat Code | A1 |
Air Velocity | 125 Mph |
Bare Tool | No |
Case Type | N/A (no case) |
Cfm | 450 |
Commercial / Residential | Commercial |
Compatibility | Dewalt products |
Decibel Rating | 61 |
Engine | Electric Motor |
Handle Length | 12 |
Handle Material | Plastic |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | SET |
Interchangeable Tips | Yes |
Kit | Yes |
Recommended Safety Equipment | Safety glasses and gloves |
Run Time (Min) | 60 |
Rust Resistant | No |
Start Type | Electric |
Vacuum Capable | No |
Vacuum Kit Ncluded | No |
Features
- BUILT FOR LESS FRICTION AND LONG SAW CHAIN LIFE: Centri-Lubetechnology includes a specially designed channel in each drive link that picks up and distributes oil from the bar to the rivets
- HIGH-SPEED CUTTING WITH LOW KICK-BACK: Ramped depth gauges allow smooth, low-vibration cutting
- BACKED BY 3-YEAR LIMITED WARRANTY: Work with confidence and peace-of-mind
Specifications
Height | 6.575 IN |
Length | 4.960 IN |
Width | 0.945 IN |
Weight | 0.421 LB |
Type | ACCESSORIES: CHAINSAWS |
Disclaimer | Maximum initial battery voltage (measured without a workload) is 60 volts. Nominal voltage is 54. | Maintains sharpness as a Semi-Chisel Chain vs. Full Chisel Chain | Chain meets all standards for ANSI Low Kickback Chain |
Warranty | MWC |
Get up to 1,100 cuts per charge with the high-performance 20V MAX 1-1/2 in. Cordless Pruner. This Pruner can cut thick flower stems, branch limbs, and bush overgrowth with a 1-1/2 in. cutting capacity and a lightweight build for low hand strain. Swiftly cut through shrubs and thick brush with 16X less effort on average than a manual pruner. An integrated LED provides visibility in low-light spots as you work. Make fast, smooth cuts with the non-stick, coated blades and quickly change them with an change tool included for convenience.
Features
- SMOOTH, SWIFT CUTS with non-stick coated blades
- QUICK BLADE CHANGES: Switch blades out with the included change tool
- BRIGHTEN DARK WORK AREAS with the on-board LED work light
- Manufactured by DEWALT
Specifications
Height | 11.772 in |
Length | 13.200 in |
Width | 3.200 in |
Weight | 5.400 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 0.8 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 2 Ah Ah |
Watt Hours | 40 |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 60 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. | ** Using DCB203 battery cutting 10 mm birch dowels | *** Using DCB203 battery vs. Fiskars 391651-1003 cutting 19 mm birch dowels |
Warranty | 3LW1YS90D |
Certifications Or Listings | No Certifications or Listings |
Hazmat Code | A1 |
Assembly Required | No |
Blade Length | 1.42 In |
Individual Vs. Set (Syndigo) | SET |
Shaft Style | Curved |
Start Type | Electric |
Strokes Per Minute | 60 |
Cut flowers, trim bushes, and clip unwanted branches with this multi-use 20V MAX 1-1/2 in. Cordless Pruner. The Pruner can deliver up to 1,100 cuts per charge with a 1-1/2 in. cut capacity for thick stems and shrubs. Weighing just 3 lbs. (tool only), this lightweight tool was designed to help you tackle tough jobs throughout the day with less strain. This unit requires 16X less effort on average to make cuts than a manual pruner. The on-board LED provides illumination for visibility in dark spots as you prune. Cut smoothly with the Pruner's non-stick, coated blades and easily switch the blades out with the included change tool. Battery sold separately.
Features
- SMOOTH, SWIFT CUTS with non-stick coated blades
- QUICK BLADE CHANGES: Switch blades out with the included change tool
- BRIGHTEN DARK WORK AREAS with the on-board LED work light
Includes
- DCPR320 Pruner
- Tool for Blade Change
Specifications
Height | 13.071 IN |
Length | 10.118 IN |
Width | 3.300 IN |
Weight | 3.748 LB |
Type | PRUNERS |
Battery Included | No |
Charger Included (Y/N) | No |
Voltage (V) | 20 V |
Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. | Using DCB203 battery (sold separately) cutting 10 mm birch dowels | Using DCB203 battery (sold separately) vs. Fiskars 391651-1003 cutting 19 mm birch dowels |
Warranty | 3LW1YS90D |
Bare Tool (Y/N) | Yes |
Features
- HIGH VERSATILITY AND PRODUCTIVITY: DEWALT Universal Attachment capability to accept additional tool pieces
- DURABILITY AND EFFICIENCY with 7-1/2 in. hardened steel blade and up to 2-1/2 in. adjustable blade depth
- EASE OF MOVEMENT with large guide wheel for mobility while edging
- SPEED CONTROL FOR OPTIMIZED POWER AND RUNTIME with variable trigger and hi/lo settings
- LONG RUN TIME: Edge more in less time with professional-grade brushless motor
Specifications
Height | 7.680 in |
Length | 36.320 in |
Width | 11.100 in |
Weight | 13.800 lbs |
Product Diameter Us | 5.985 IN |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 60 V V |
Battery Included | No |
Battery Type | 60V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Charge Time | 1 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | No |
Adjustable Depth | Yes |
Assembly Required | Yes |
Bare Tool | Yes |
Bevel Adjustment | No |
Blade Length | 7.5 In |
Cut Capacity Height | 7.5 In |
Cutting Width | 7.5 In |
Fuel Type | Battery Powered |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Run Time (Min) | 60 |
Rust Resistant | Yes |
Shaft Length | 35 In |
Shaft Style | Straight |
Start Type | Electric |
Designed to meet the needs of landscape maintenance professionals, Our M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ gives you the power to cut hardwood branches, reaches full throttle in under 1 second, and delivers up to 150 cuts per charge. The cordless pole saw is made up of two components the M18 FUEL™ Power Head w/ QUIK-LOK™ and QUIK-LOK™ 10" Pole Saw Attachment. This M18 FUEL™ Power Head, part of the M18 FUEL™ QUIK-LOK™ Attachment System, is compatible with multiple attachments such as an Edger, Articulating Hedge Trimmer, and String Trimmer attachment. This gives you the ability to quickly swap out attachments on a single Power Head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ Brushless Motor gives you the power to maintain its speed in demanding applications without bogging down, outperforming higher voltage systems. The Motor is positioned in the rear of the pole saw to provide the best combination of power, balance, and maneuverability. REDLINK PLUS™ intelligence gives you maximum performance and protection from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response and a variable speed trigger giving you ultimate control over the power range. The M18™ REDLITHIUM™ HIGH OUTPUT XC8.0 (sold separately) Battery gives you best in class performance in all applications and delivers up to 150 cuts per charge. Our M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ is part of the M18™ system which is fully compatible with over 200 tools.
Features
- POWERSTATE brushless motor - purposely built for the M18 FUEL power head with QUIK-LOK to generate the power and performance of high voltage platforms
- REDLINK PLUS™ Intelligence - optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications, compatible across the M18 system
- M18 REDLITHIUM high output XC8.0 battery - delivers unmatched run-time, power and longer life
- Part of the QUIK-LOK attachment system
- RPM - 4,600
- Bar length - 10 in.
- Chain gauge - 0.043 in.
- Chain pitch - 3/8 in. low profile
- Length - 80 in.
- Weight - 12.7 lbs.
Specifications
Bar Length (in) | 10.0 |
Adjustable Length | No |
Maximum Length (ft) | 50.25 |
Chain Included | Yes |
Automatic Oiler | Yes |
Battery Ampere-hour (Ah) | 0 |
Battery Voltage (V) | 18 |
Case Included | No |
Color / Finish | Red/Black |
Fuel Type | Battery Powered |
Fully Assembled | Yes |
Housing Material | Reinforced Nylon |
Battery Quantity Included | 0 |
Weight | 4.2 lbs |
Anti-Vibration Handle | Yes |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Work Gloves |
The MILWAUKEE® M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ kit gives users the power to cut hardwood branches, reaches full throttle in under 1 second, and delivers up to 150 cuts per charge. The cordless pole saw is made up of two components the M18 FUEL™ Power Head w/ QUIK-LOK™ and QUIK-LOK™ 10" Pole Saw Attachment. This M18 FUEL™ Power Head, part of the M18 FUEL™ QUIK-LOK™ Attachment System, is compatible with multiple attachments such as an Edger, Articulating Hedge Trimmer, and String Trimmer attachment. This gives users the ability to quickly swap out attachments on a single Power Head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ Brushless Motor gives users the power to maintain its speed in demanding applications without bogging down, outperforming higher voltage systems. The Motor is positioned in the rear of pole saw to provide the best combination of power, balance, and maneuverability. REDLINK PLUS™ intelligence gives users maximum performance and protection from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response and a variable speed trigger giving users ultimate control over the power range. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery gives users best in class performance in all applications and delivers up to 150 cuts per charge. The M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ is part of the M18™ system which is fully compatible with over 200 tools. In addition to the cordless pole saw, the kit includes a 3' Attachment Extension, Shoulder Strap, one M18™ REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery and an M18™/M12™ Rapid Charger.
Features
- POWERSTATE™ Brushless Motor - Purposely built for the M18 FUEL™ Power Head w/ QUIK-LOK™ to generate the power and performance of high voltage platforms
- REDLINK PLUS™ Intelligence - Optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18™ System.
- M18™ REDLITHIUM™ HIGH OUTPUT XC8.0 Battery provides 50% More Power and Runs 50% Cooler vs REDLITHIUM™ Batteries
- Part of the QUIK-LOK™ Attachment System
- RPM - 4,600
- Bar Length - 10"
- Chain Gauge - .043"
- Chain Pitch - 3/8" Low Profile
- Length - 80"
- Weight - 12.7 lbs
Specifications
Bar Length (in) | 10 |
Adjustable Length | No |
Maximum Length (ft) | 6.5 |
Chain Included | Yes |
Automatic Oiler | Yes |
Battery Ampere-hour (Ah) | 8.0 |
Battery Voltage (V) | 18 |
Case Included | No |
Color / Finish | Red/Black |
Fuel Type | Battery Powered |
Fully Assembled | No |
Housing Material | Reinforced Nylon |
Battery Quantity Included | 1 |
Amperage (A) | 8.0 |
Weight | 12.7 lbs |
Anti-Vibration Handle | Yes |
Anti Kick Back Tip | No |
Chain Length (ft) | 0.83 |
Engine Torque (ft-lbs) | 3.88 |
Handle Length (in) | 11 |
Handle Material | Rubber |
Quick Adjust Tensioning System | Yes |
Rust Resistant | Yes |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Work Gloves |
The Milwaukee M18 FUEL™ 16 in. Chainsaw delivers the power to cut hardwoods, cuts faster than gas, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18 user. The POWERSTATE™ brushless motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery delivers unmatched run-time in all applications. M18 FUEL™ technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity.
Features
- POWERSTATE™ Brushless motor - purposely built for the M18 FUEL™ 16 in. chainsaw to generate the power and performance of a gas engine up to 40CC
- REDLINK Plus™ intelligence - ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ system
- REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery pack - provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs; superior pack construction provides the industry's best protection against jobsite conditions
- 16 in. Oregon bar and chain
- Dual-stud for improved bar and chain retention
- Automatic oiler for proper chain lubrication and increased productivity
- Onboard storage for scrench
- Compatible with 150+ M18™ tools
Specifications
Bar Length (in) | 16.0 |
Cordless / Corded | Cordless |
Weight | 13.9 lbs |
Color / Finish | Red/Black |
Chain Included | Yes |
Handle Length (in) | 6.5 |
Handle Material | Rubber |
Housing Material | Glass filled nylon |
Case Included | No |
Battery Ampere-hour (Ah) | 12.0 |
Battery Type | M18 |
Battery Voltage (V) | 18 |
Automatic Oiler | Yes |
Fully Assembled | Yes |
Low Kickback Bar And Chain | Yes |
Fuel Type | Electric |
Oil Level Sight Glass | Yes |
Replacement Chain Item Number | 49-16-2715 |
Rust Resistant | Yes |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Gloves |
The Milwaukee® M18™ FUEL™ string trimmer with QUIK-LOK™, designed for landscape maintenance professionals, provides the power to clear thick brush, reaches full throttle in under 1 second, and delivers up to 1 hour of run-time per charge. The cordless string trimmer is made of two components the M18™ FUEL™ power head with QUIK-LOK™ and QUIK-LOK™ string trimmer attachment. This M18™ FUEL™ power head, part of the QUIK-LOK™ attachment system, is compatible with multiple attachments such as our edger, articulating hedge trimmer, and pole saw attachment. This allows attachments to be swapped out on a single power head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE™ brushless motor delivers up to 6,200 RPM with up to a 16 in. cutting swath, and gives you the power to maintain speed in demanding applications without bogging down. The motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. REDLINK Plus™ intelligence ensures maximum performance while protecting from overload, overheating and over discharge. The advanced electronic package delivers instantaneous throttle response, high and low speeds, and a variable speed trigger for ultimate control over the power range. The M18™ REDLITHIUM™ HD9.0 battery (sold separately) provides best in class performance and run-time in all applications, delivering up to 1 hour of run-time per charge. The easy load trimmer head offers an easy line loading experience and enables reloads of 25 Ft. of trimmer line in under 30 seconds. The M18™ FUEL™ string trimmer with QUIK-LOK™ is part of the M18™ system which is fully compatible with over 175 tools.
Features
- POWERSTATE™ brushless motor - purposely built for the M18™ FUEL™ power head with QUIK-LOK™ to generate the power and performance of high voltage platforms
- REDLINK Plus™ intelligence - optimizes performance, provides overload protection preventing damage to tool and battery during heavy applications; compatible across the M18™ system
- REDLITHIUM™ HD9.0 battery pack - delivers unmatched run-time, power, and longer life
- Part of the QUIK-LOK™ attachment system
- Features the Milwaukee® easy load trimmer head
- RPM - 0-4900 / 0-6200
- Cutting swath - 14 in. - 16 in.
- Line diameter - 0.080 in. / 0.095 in.
- Trigger - variable speed
- Weight - 9.85 lbs
Specifications
Fuel Type | Battery Powered |
Battery Ampere-hour (Ah) | 0.0 |
Battery Voltage (V) | 18 |
Cutting Width (in) | 16 |
Color / Finish | Red/Black |
Adjustable Height | No |
Minimum Handle Height (in) | 70.5 |
Shaft Style | Straight |
Trimmer Line Count | Dual |
Line Feed Type | Bump |
Line Diameter (in) | 0.08 |
Battery Quantity Included | 0 |
Handle Material | Rubber |
Housing Material | Reinforced Nylon |
Edger Capable | Yes |
Rust Resistant | Yes |
Shoulder Strap Included | No |
Weight | 9.85 lbs |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Work Gloves |
Features
- Durable cutting grip to easily remove pruned branches with metal bucking strip and tree hook
- Brushless motor for up to 96 cuts per charge on a 4 in. x 4 in. pressure treated pine wood (with DCB204)
- 8 in. low-kickback, full-compliment bar and chain
- Auto oiling for low maintenance
- Comfort grip handle
- Extension pole for up to 15 ft. reach
Specifications
Height | 41.928 in |
Length | 12.960 in |
Width | 6.693 in |
Weight | 12.230 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,9.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | **Up to 96 cuts per charge on 4"x4" pressure-treated pine, using DCB204 Ah battery (sold separately) | Based on a 6.0 ft. person holding the pole in a straightened position at shoulder level, 60 degrees from the ground. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Adjustable | Yes |
Adjustable Depth | Yes |
Assembly Required | No |
Automatic Oiler | Yes |
Bar Length | 8 In |
Bare Tool | Yes |
Case Type | Case |
Chain Included | Yes |
Chain Length | 8.0 In |
Chain Pitch | 3/8 in. In |
Cutting Width | 8 In |
Drive Links | 34 |
Fuel Type | Battery Powered |
Gauge | 0.043 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Length | 15 In |
Recommended Safety Equipment | Safety glasses and gloves |
Get the flexibility and trimming power needed to finish the job with the DEWALT 60V MAX Attachment Capable String Trimmer Kit. The high-efficiency brushless motor maximizes runtime and product life while consistently providing the capacity to tackle tough overgrowth and withstand heavy-duty use. Easily convert this trimmer into other outdoor tools with DEWALT universal attachment-capability that allows you to connect additional add-ons and take on more work. It has a 60V MAX FLEXVOLT battery that powers 60V MAX DEWALT tools and is also backwards compatible to work with 20V MAX DEWALT tools.
Features
- HIGH ADAPTABILITY: DEWALT Universal Attachment capability to accept additional tool pieces
- FLEXIBLE OPERATION: 15 in./17 in. adjustable swath with 0.080 in. dual line (also works with DEWALT 0.095 in. line)
- QUICK-LOAD SPOOL for convenient and efficient re-spooling
- OPTIMIZE POWER AND RUNTIME with variable trigger and hi/lo speed control
- TRIM MORE IN LESS TIME with high-performance brushless motor
Specifications
Height | 5.789 in |
Length | 40.267 in |
Width | 10.423 in |
Weight | 16.980 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 60 V V |
Battery Included | Yes |
Battery Type | 60V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 3.2 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 9 Ah Ah |
Watt Hours | 180 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Hazmat | Li-Ion (101-300 WH) |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Claims Needed | No |
Hazmat Code | A1 |
Adjustable Height | Yes |
Assembly Required | Yes |
Bare Tool | No |
Cut Capacity Height | 15 In |
Cutting Width | 15 In |
Edger Capable | Yes |
Fuel Type | Battery Powered |
Handle Length | 35 |
Handle Material | Plastic |
Head Style | Wind with Assembly |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Line Diameter | 0.08 In |
Line Feed Type | Bump |
Line Length | 0.080 In |
Minimum Handle Height | 35 In |
Recommended Safety Equipment | Safety googles and gloves |
Run Time (Min) | 60 |
Rust Resistant | Yes |
Shaft Length | 35 In |
Shaft Style | Straight |
Size (String) | String |
Start Type | Electric |
Strap Included | No |
Trimmer Line Count | 2 |
Equipped with an 18 in. bar and chain, this Electric Chainsaw has the power to handle all your cutting needs. Its high-efficiency brushless motor delivers a robust output of 2.8 HP. Cut through heavy-duty lumber with 15 Amps of power and maximize your productivity with motor speeds up to 12 m/s. Dual retention bolts and durable metal bucking spikes let you make quick cuts with more control and superior leverage. Save time on maintenance with this chainsaws auto-oiling feature, including an oil window to easily monitor your oil level.
Features
- HIGH CUT CAPACITY: Low kickback 18 in. bar and chain delivers the power of gas without the hassle
- FAST AND POWERFUL CUTS: Tackle heavy-duty jobs with 15 Amp motor at speeds up to 12.5 m/s
- OPTIMIZED EFFICIENCY: Finish more in less time with 2.8 HP brushless motor
- LOW MAINTENANCE: Convenient auto-oiling feature saves time on tool upkeep and includes an oil window to monitor your oil level
- EXCEPTIONAL LEVERAGE for more control and quicker cuts with large metal bucking spikes
- PREMIUM-QUALITY BAR RETENTION with dual stud retention bolts
Specifications
Height | 40.865 in |
Length | 11.069 in |
Width | 9.909 in |
Weight | 14.500 lbs |
Power Source | Electric |
Cordless Vs. Corded | Corded |
Motor Type | Brushless |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Amperage | 15 |
Cord Length | 8 Ft |
Disclaimer | 2.8 HP for performance equivalent to a 45 cc gas chainsaw* |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | Yes |
Anti Kick Back Tip | No |
Assembly Required | No |
Automatic Oiler | Yes |
Bar Length | 18 In |
Blade Material | Metal |
Chain Included | Yes |
Chain Pitch | 3/8" In |
Drive Links | 62 |
Fuel Type | Electric |
Gauge | 0.05 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Low Kickback Bar And Chain | Yes |
Quick Adjust Tensioning System | No |
Recommended Safety Equipment | Safety glasses and gloves |
Features
- Gear drive design Powers through tough overgrowth
- High-efficiency brushless motor maximizes run time and motor life
- 15 In. cutting swath with 0.080 In. line (also accepts 0.095 In.)
- Variable speed trigger with hi/lo speed control for added power or extended run time
- Lightweight and ergonomic design maximizes control and minimizes stress on your arms
- Designed to withstand everyday heavy-duty usage
Specifications
Height | 38.975 in |
Length | 12.500 in |
Width | 10.466 in |
Weight | 18.900 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 60 V V |
Battery Included | Yes |
Battery Type | 60V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 3 Ah Ah |
Watt Hours | 180 |
Charger Included | Yes |
Amperage | 3 |
Battery Required | Yes |
Charge Time | 1 |
Number Of Batteries Required | 1 |
Disclaimer | NULL |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | No |
Hazmat Code | A1 |
Adjustable Height | Yes |
Assembly Required | No |
Bare Tool | No |
Cut Capacity Height | 15 In |
Cutting Width | 15 In |
Edger Capable | No |
Fuel Type | Electric |
Handle Length | 45 |
Handle Material | Plastic |
Head Style | Wind with Assembly |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Kit | Yes |
Line Diameter | 0.080 In |
Line Feed Type | Bump |
Line Length | 0.080 In |
Minimum Handle Height | 45 In |
Recommended Safety Equipment | Safety glasses and gloves |
Run Time (Min) | 60 |
Rust Resistant | No |
Shaft Length | 45 In |
Shaft Style | Straight |
Size (String) | String |
Start Type | Electric |
Strap Included | No |
Trimmer Line Count | 2 |
Features
- Folding hinge to fit into small storage spaces
- Reduced length when folded for easy transportation
- 14 in. swath for a wide cutting area
- Durability even in the thick brush
- Choose between performance and runtime with variable-speed trigger
- Wind new line fast with QuickLoad Spool
- Control power level with Hi/Lo speed control switch
Specifications
Height | 38.920 in |
Length | 9.970 in |
Width | 5.240 in |
Weight | 9.220 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,9.pdf |
Charger Included | No |
Battery Required | Yes |
Charge Time | 1 |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** The DEWALT 20V MAX* 14" Folding String Trimmer is 40% shorter when folded versus when fully extended. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Adjustable Height | Yes |
Assembly Required | No |
Bare Tool | Yes |
Cut Capacity Height | 14 In |
Cutting Width | 14 In |
Edger Capable | Yes |
Fuel Type | Electric |
Handle Length | 38 |
Handle Material | Plastic |
Head Style | Wind without Assembly |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Line Diameter | 0.080 In |
Line Feed Type | Bump |
Line Length | 0.080 In |
Minimum Handle Height | 38 In |
Recommended Safety Equipment | Safety Glasses and Gloves |
Run Time (Min) | 60 |
Rust Resistant | No |
Shaft Length | 38 In |
Shaft Style | Straight |
Size (String) | String |
Start Type | Electric |
Strap Included | No |
Trimmer Line Count | 2 |
The MILWAUKEE® M18 FUEL™ 14" Chainsaw delivers the power to cut hardwoods, cuts faster than gas up to 40cc and delivers up to 150 cuts per charge. The cordless chainsaw is designed to meet the performance, durability, and ergonomic needs of landscape maintenance and power utility professionals. The POWERSTATE™ Brushless Motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery (sold separately) delivers unmatched run-time in all applications. M18 FUEL™ technology allows the battery-powered chainsaw to reach full throttle in under 1 second providing ultimate control and productivity.
Features
- 14" Oregon Bar and Chain
- Variable Speed Trigger for full control
- Dual-stud for improved bar and chain retention
- Automatic oiler for proper chain lubrication and increased productivity
- Onboard storage for scrench
- Metal Bucking Spikes
- Part of the M18™ System, Featuring over 200 solutions
- Power To Cut Hardwoods
- Faster Than Gas
- Up to 150 Cuts Per Charge
Specifications
Bar Length (in) | 14 |
Cordless / Corded | Cordless |
Weight | 10.4 lbs |
Color / Finish | Red/Black |
Chain Included | Yes |
Handle Length (in) | 6.5 |
Handle Material | Rubber |
Housing Material | Reinforced Nylon |
Case Included | No |
Battery Ampere-hour (Ah) | 0.0 |
Battery Type | M18 |
Battery Voltage (V) | 18 |
Automatic Oiler | Yes |
Fully Assembled | Yes |
Low Kickback Bar And Chain | Yes |
Fuel Type | Electric |
Oil Level Sight Glass | Yes |
Rust Resistant | Yes |
CSA Certified | No |
ETL Listed | No |
UL Listed | Yes |
Recommended Safety Equipment | Safety Glasses, Gloves |
As part of the 60V MAX FLEXVOLT battery system of high-powered products, the 60V MAX FLEXVOLT Brushless Handheld Axial Blower powers through your task with up to 600 CFM of air volume and 125 MPH. It features a variable speed trigger and speed lock to control the blower output. The brushless motor design is high efficiency to provide high power and helps extend runtime. This kit also comes with a 20V/60V MAX FLEXVOLT battery that can both power your line-up of 60V MAX tools and equipment as well as your 20V MAX tools and can be charged with your 20V MAX chargers.
Features
- High-efficiency brushless motor helps extend runtime
- Powers through debris at up to 600 CFM of air volume at 125 MPH
- Designed to withstand everyday heavy-duty usage
- Variable speed trigger and speed lock maintain control of the blower output
- Includes 60V MAX 3Ah battery and charger
Specifications
Height | 23.520 in |
Length | 12.600 in |
Width | 8.170 in |
Weight | 12.050 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 60 V V |
Battery Included | Yes |
Battery Type | 60V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 3.2 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 9 Ah Ah |
Watt Hours | 180 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 and 60 volts. Nominal voltage is 18 and 54. |
Hazmat | Li-Ion (101-300 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Hazmat Code | A1 |
Air Velocity | 125 Mph |
Bare Tool | No |
Case Type | N/A (no case) |
Cfm | 600 |
Commercial / Residential | Commercial |
Compatibility | Dewalt products |
Decibel Rating | 67 |
Engine | Electric Motor |
Handle Length | 5.5 |
Handle Material | Plastic |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Interchangeable Tips | No |
Kit | Yes |
Recommended Safety Equipment | Safety glasses and gloves |
Run Time (Min) | 30 |
Rust Resistant | No |
Start Type | Electric |
Vacuum Capable | No |
Vacuum Kit Ncluded | No |
Features
- Max Air Flow 100CFM
- 3-Speed variable speed switch providing control and versatility
- Variable speed trigger allows adjustment of blowing power in use
- Trigger lock-on reduces end user fatigue
- Lightweight compact design allows use in space restricted areas
Specifications
Height | 7.875 in |
Length | 12.625 in |
Width | 5.750 in |
Weight | 3.950 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushed |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD/Transition |
Air Velocity | 135 Mph |
Bag Included | No |
Bare Tool | Yes |
Case Type | N/A (no case) |
Cfm | 100 |
Compatibility | Dewalt 20 V |
Decibel Rating | 96 |
Engine | Brushed |
Handle Length | 4.72 |
Handle Material | Plastic |
Housing Material | Plastic |
Includes Dual Batteries | No |
Individual Vs. Set (Syndigo) | SET |
Interchangeable Tips | Yes |
Kit | Yes |
Recommended Safety Equipment | Safety Glasses |
Run Time (Min) | 18 |
Rust Resistant | No |
Start Type | Push |
Vacuum Capable | No |
Variable Speed | Yes |
Features
- Gear drive design powers through tough overgrowth
- Lightweight and ergonomic design maximizes control during operation
- High-efficiency brushless motor maximizes runtime and motor life
- Variable speed trigger with Hi/Lo speed control to manage power and extended run time
- Designed for everyday heavy-duty usage
- Bump feed head comes with 1 Quick Load spool of 0.08 in. dual line installed
- 15 in. cutting swath with DEWALT 0.080 in. line (also accepts DEWALT 0.095 in. line)
Specifications
Height | 38.770 in |
Length | 12.510 in |
Width | 10.466 in |
Weight | 14.020 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 60 V V |
Battery Included | No |
Battery Type | 60V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Charge Time | 1 |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 and 60 volts. Nominal voltage is 18 and 54. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Claims Needed | Yes |
Adjustable Height | Yes |
Assembly Required | No |
Bare Tool | Yes |
Cut Capacity Height | 15 In |
Cutting Width | 15 In |
Edger Capable | No |
Feed Rate/S | 147 Ft/Min |
Fuel Type | Electric |
Handle Length | 45 |
Handle Material | Plastic |
Head Style | Wind with Assembly |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Line Diameter | 0.080 In |
Line Feed Type | Bump |
Line Length | 0.080 In |
Maximum Speed | 6600 RPM Rpm |
Minimum Handle Height | 45 In |
Recommended Safety Equipment | Safety glasses and gloves |
Run Time (Min) | 60 |
Rust Resistant | No |
Shaft Length | 45 In |
Shaft Style | Straight |
Start Type | Electric |
Strap Included | No |
Trimmer Line Count | 2 |
Lightweight and compact, the 20V MAX 8 in. Cordless Pruning Chainsaw has a high-efficiency brushless motor designed to maximize runtime and motor life with up to 70 cuts per charge. Weighing just 4.6 lbs (tool only), the Pruning Chainsaw is 61% lighter and 3x more compact, designed to reduce fatigue while cutting, trimming and pruning. Use it to trim branches from downed trees, cut bundles of wood or branches, and manage thick brush or daily pruning needs. Compact design allows for easy access to tight spaces. Integrated tip guard is designed to provide stability during upcuts, and onboard wrench allows for tool-free tensioning. Kit includes (1) 20V MAX DCB230 3 Ah battery, charger, tensioning tool and bar sheath.
Includes
- DCCS623 Chainsaw
- DCB230 Battery
- Charger
- Tensioning Tool
- Bar Sheath
Features
- Lightweight and designed for reduced fatigue
- Up to 70 cuts per charge on a 4" x 4" pressure treated pine using DCB230 battery
- Compact design for easy access to tight spaces
- High-efficiency brushless motor designed to maximize run time and motor life
Specifications
Height | 5.250 IN |
Length | 22.470 IN |
Width | 11.230 IN |
Weight | 9.304 LB |
Type | CHAIN SAWS |
Battery Quantity | 1 |
Battery Weight | 1 |
Voltage (V) | 20 V |
Watt Hours | 60 |
Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | Compared to the DCCS620 chainsaw (tool only). | Using DCB230 battery, tested on 4"x4" Pressure-Treated Pine |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Features
- 7- position, 180° articulating head offers customized cutting angles for hedges of any shape and size
- 1 in. cutting capacity for superior cutting performance
- Up to 12 ft. max reach
- 22 in. hardened steel laser cut dual action blade for fast cutting with 2800 spm
- 1 in. cutting gap for cutting performance on thick branches
Specifications
Height | 42.000 in |
Length | 13.125 in |
Width | 6.625 in |
Weight | 13.300 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 1.4 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 4 Ah Ah |
Watt Hours | 80 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** Based on a 6.0 ft. person holding the pole in a straightened position at shoulder level, at a 90 degree angle from the ground. |
Hazmat | Li-IonBatt <101 WH |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | Yes |
Hazmat Code | A1 |
Assembly Required | Yes |
Blade Action | Dual |
Blade Length | 22 In |
Blade Material | Stainless Steel |
Cutting Width | 1 In |
Handle Material | Plastic |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Recommended Safety Equipment | Safety glasses and gloves |
Rust Resistant | No |
Shaft Style | Straight |
Start Type | Electric |