S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Air Nailers
Features
- Lightweight aluminum housing for job site durability
- Zero nail lockout feature eliminates dry firing and indicates when to reload the magazine
- Nosepiece features carbide inserts for long-life performance
- Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces
Specifications
| Height | 5.200 IN |
| Length | 12.200 IN |
| Width | 11.100 IN |
| Weight | 5.950 LB |
| Type | NAILER: ROOFING |
| Voltage (V) | 120 V |
| Warranty | 1LW |
| Bare Tool (Y/N) | No |
This 23-gauge 1-3/8 in. Pin Nailer delivers impressive performance with a lightweight aluminum body that makes it easy to use all day. Keep it at your side and ready to use with the reversible belt clip. This tool is ideal for cabinet makers, cabinet installers, furniture builders, and mantle builders. Its perfect for light fastening and clamping applications including, but not limited to, small trim and small decorative moldings, cabinet crown molding, raised panel doors, rope and bead molding, mantle building, and wood joining. Use this Pin Nailer to fasten materials that would normally split when using larger tools. Designed with a maintenance-free motor, it requires no oil to be added to the tool. The motor utilizes a dual-stack ring system where the outer ring is designed to minimize internal friction, resulting in longer tool life. This improved motor design helps reduce the possibility of work surface oil contamination and promotes hassle-free tool operation.
Features
- Uses 23 Ga. headless and slight head pin nails from 5/8" to 1-3/8" length
- Long life maintenance free motor to keep from staining the work surface
- Consistent power and penetration to sink 1-3/8" nail sub-flush into Oak
- Rear exhaust to keep contaminates away from work
- Dry-fire lock-out alerts user to re-load nails and eliminates empty nail holes
- Narrow nose design with removable non-marring nose tip with on tool storage
- Tool automatically adjusts for different fastener lengths for easier loading and less problems with pins out of spec
- Convenient side-load magazine holds 130 micro pin nails
- Reversible belt clip to keep tool close to user
Includes
- nailer
- 1/4" air fitting
- and carrying case
Specifications
| Height | 4.000 in |
| Length | 11.500 in |
| Width | 13.700 in |
| Weight | 4.750 lbs |
| Power Source | NON-ENERGY USING |
| Cordless Vs. Corded | Corded |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Test Summary | PORTER CABLE_UN38.3 LITHIUM TEST SUMMARY_Rev1,1.pdf |
| Warranty | 3LW1YS90D |
| Claims Needed | No |
| Air Delivery Scfm @ 90Psi-Uom:Cfm | 1.6 |
| Air Inlet Size | 0.25 In |
| Firing Mode | Full Sequential |
| Gauge | 23 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Loading Type | Strip |
| Magazine Capacity | 2000 |
| Maximum Fastener Size | 1-3/8 in |
| Minimum Fastener Size | 5/8 in |
| Multi-Purpose | Single Purpose |
| Nail Gauge | 23 gauge |
| Nail Gun Angle | 0 degree |
| Operating Pressure | 60 PSI2 |
| Recommended Air Pressure | 60 Psi |
Features
- Patented push button adjustable depth guide sets nails to desired depths quickly and conveniently
- Lightweight magnesium design for added durability
- Adjustable on-board rafter hook allows tool to be hung from rafters or floor joists
- Drives 2-in to 3-1/2-in plastic collated framing nails
Specifications
| Powered Tool Power Source | Pneumatic |
| Nailer / Stapler Design | Nailer |
| Nailer / Stapler Power | Pneumatic |
| Pneumatic Nailer Type | Framing |
| Magazine Capacity | 60 |
| Color / Finish | Bostitch Gold and Black |
| Depth Control | Tool Free |
| Fastener Gauge Range | .113-.131 |
| Fastener Length Range | 2 In. - 3-1/2 In. |
| Housing Material | Magnesium |
| Length (in) | 16.0 |
| Height (in) | 5.6 |
| Operating Pressure | 90-120 |
| Fastener Format | Strip |
| Net Tool Weight (lbs) | 8.1 |
| Air Inlet Size (in) | 0.25 |
| Fasteners Used | 2" - 3-1/2" 21 degree plastic collated framing nails |
| Fastener Type | Framing |
| Collation | Plastic |
| Case Included | No |
| ANSI Safety Listing | No |
| Package Contents | tool, contact trigger |
| Manufacturer Warranty | 7 Year Limited Warranty. 1 year Limited Warranty in production applications. See Bostitch.com for full warranty information. |
