S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsPersonal Protection Equipment
Personal protection equipment is not only vital for your safety and the safety of your team, it is required on most job sites. That's why Kinnunen carefully chooses their offerings from manufacturers known for the highest quality and reliability. Our selection of PPE equipment ensures that every member of your team is covered completely, from head to toe.Contact our team of experts today at 1-800-432-8979 or fill out our contact form for help with all your personal protection equipment needs.
Features
- Black over Blue Double Dipped Neoprene
- Brushed Interlock Liner
- Treated with Actifresh®
- 12 Inch Length
- Sandy Finish
- Component materials comply with all federal regulations for food contact
Specifications
HI VIS | No |
Reflective | No |
Material | Neoprene |
Insulated | No |
ActiFresh® | Yes |
Palm/Polymer Type | Neoprene |
Thumb Style | Wing |
Ambidextrous | No |
Made in USA | No |
Hemmed | No |
Sterility | Non-Sterile |
FDA Accepted Materials | Yes |
Dip | Double Dip |
Finger Style | Standard |
Cuff Material | Neoprene |
Cuff Style | Gauntlet |
Grade | Industrial Grade |
Overall Length | 12 in. |
Lining | Brushed Interlock |
Glove Size | X - Large |
Chem-Tech™ gloves offer the protection you've come to expect from latex gloves and neoprene gloves rolled into one hard working glove. This glove features a yellow flock lined latex glove dipped in rugged blue neoprene for double protection. The 5409S is 28 mil in thickness and measures 12 inches in length. It has a raised diamond grip pattern on the palm, palm side fingers and thumb that increase griping power. Other features include a straight cuff and straight thumb. Looking for the best flock lined gloves? Look no further than MCR Safety! This product contains natural rubber latex which may cause allergic reaction to those with latex allergies. Sizes: XS=5406S, Small=5407S, Medium=5408S, LG=5409S, XLG=5400S, XXLG=5401S
Features
- 28 mil blue neoprene over yellow latex
- 12 inch length
- Flocked lined
- Straight cuff
- Raised diamond grip palm side
- Component materials comply with all federal regulations for food contact
- Chemical resistant gloves
Specifications
HI VIS | No |
Reflective | No |
Material | Latex |
Insulated | No |
ActiFresh® | No |
Palm/Polymer Type | Latex |
Thumb Style | Straight |
Ambidextrous | No |
Made in USA | No |
Hemmed | No |
Sterility | Non-Sterile |
FDA Accepted Materials | Yes |
Dip | Double Dip |
Mil Thickness | 28 mil |
Finger Style | Standard |
Cuff Material | Latex |
Cuff Style | Straight |
Grade | Industrial Grade |
Overall Length | 12 in. |
Lining | Flocked |
Glove Size | X - Large |
Nitrile gloves are three times more puncture resistant than rubber and can be used to offer superior resistance to many types of chemicals. This glove is an excellent alternative for individuals who experience allergic reactions to latex. The 5339S series is a flock lined industry grade nitrile glove that is 18 mil in thickness and 13 inches long. Component materials comply with all federal regulations for food contact. The 5339S also has a raised diamond pattern in the palm for additional grip. Looking for the best flock lined nitrile gloves? Look no further than MCR Safety!
Features
- 18 mil flock lined green nitrile gloves
- 13 inch length
- Component materials comply with all federal regulations for food contact
- Industry grade
- Raised diamond grip
- Straight Cuff
- Straight thumb
- Chemical resistant nitrile gloves
Specifications
HI VIS | No |
Reflective | No |
Material | Nitrile |
Insulated | No |
ActiFresh® | No |
Palm/Polymer Type | Nitrile |
Thumb Style | Straight |
Ambidextrous | No |
Made in USA | No |
Hemmed | No |
Sterility | Non-Sterile |
Mil Thickness | 18 mil |
Finger Style | Standard |
Cuff Material | Nitrile |
Cuff Style | Straight |
Grade | Industrial Grade |
Overall Length | 13 in. |
Lining | Flocked |
Glove Size | X - Large |
Features
- Drape at back to shade the neck
- Elastic at back for secure fit
- High visibility fabric and silver reflective tape
- Shields eyes and neck from the sun
- Helps alleviate heat stress
- Fits most cap style and full brim hard hats
- Hard Hat Neck Shade
- FR Treated
- Hi-Vis with Reflective Stripe
- Elastic
- Fits Most Hard Hats
- Yellow and Orange
Specifications
Lowest Length | 32 cm |
Lowest Width | 16.5 cm |
Lowest Height | 0.58 cm |
Lowest Weight | 0.05 kg |
IP Length | 32 cm |
IP Width | 16.5 cm |
IP Height | 7 cm |
IP Weight | 0.58 kg |
Style | 396-700FR |
Color | Hi-Vis Yellow |
Size | OS |
Brand | PIP® |
Closure | Elastic |
Fabric | Mesh | Polyester |
Packaging | Bagged Each |
Features
- Enhanced with electrolytes, including potassium and sodium, to support hydration.
- Convenient packaging with 50 individually wrapped sticks.
- Quick dissolve formula for immediate hydration.
- Refreshing Lemon Lime flavor.
Specifications
Flavor | Lemon Lime |
Quantity | 50 sticks per box |
Serving Size | 0.11 oz (3.1 g) per stick |
Calories per Serving | 5 |
Mixing Instructions | 1 stick per 16.9 - 20 oz water bottle |
Packaging | Individually wrapped sticks |
Features
- Enhanced with electrolytes, including potassium and sodium, to support hydration.
- Convenient packaging with 50 individually wrapped sticks.
- Quick dissolve formula for immediate hydration.
- Refreshing Blue Raz flavor.
Specifications
Flavor | Blue Raz |
Quantity | 50 sticks per box |
Serving Size | 0.11 oz (3.1 g) per stick |
Calories per Serving | 5 |
Mixing Instructions | 1 stick per 16.9 - 20 oz water bottle |
Packaging | Individually wrapped sticks |
Features
- Enhanced with electrolytes, including potassium and sodium, to support hydration.
- Convenient packaging with 50 individually wrapped sticks.
- Quick dissolve formula for immediate hydration.
- Refreshing Fruit Punch flavor.
Specifications
Flavor | Fruit Punch |
Quantity | 50 sticks per box |
Serving Size | 0.11 oz (3.1 g) per stick |
Calories per Serving | 5 |
Mixing Instructions | 1 stick per 16.9 - 20 oz water bottle |
Packaging | Individually wrapped sticks |
The GloWear 8935 Hi-Vis Sun Hat is a lightweight and breathable sun protection hat for face and head shade while working outdoors. This 150D polyester sun hat features a wide brim for complete coverage, while 360-degree mesh venting maximizes airflow for breathable comfort. The hi-vis colors (lime or orange) and 1in //2.5cm reflective tape are ANSI 107-approved to keep workers safe and seen. This sun protection hat is available in three sizes (S/M, L/XL, 2XL/3XL) to fit a variety of head sizes. Machine wash as needed and hang to dry. Ideal for those working in hot environments where shade and cooling is needed, including agriculture and landscaping. Can also be used for outdoor recreation such as hiking, fishing or gardening.
Features
- LIGHTWEIGHT SUN PROTECTION 150D polyester hat with wide brim to shade face and head for comfortable protection against sun damage
- BREATHABLE 360-degree mesh venting for maximum airflow
- ENHANCED VISIBILITY Made with ANSI 107-approved hi-vis fabric and 1" reflective tape to keep workers safe and seen
- DRAWSTRING CORD For a secure fit
- BRIM WIDTH 2.5in // 6.5cm
- THREE SIZES S/M (21-22.5in // 53.3-57.1cm), L/XL (22.5-24in // 57.1-60.9cm) and 2XL/3XL (24-25.5in // 60.9-64.7cm)
- MACHINE WASHABLE
- PATENTED
Specifications
Color | Lime |
Item Size | S/M |
The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 1 Nitrile Dipped Gloves are designed to be more durable and provide better protection. The soft and comfortable liner wicks away moisture during extended wear, while the nitrile coating provides better grip and durability. These Milwaukee Nitrile Dipped Gloves allow for improved dexterity and easier mobility when handling small objects. SMARTSWIPE™ fingertips & palms provide full access to touchscreen devices without removing the gloves. MILWAUKEE® Nitrile Dipped Gloves feature a color-coded wrist band and back of hand logo for easy cut level identification.
Features
- Soft & Comfortable Liner
- Sandy Nitrile Coating for Better Grip
- Improved Dexterity for Easier Mobility when handling small objects
- Nylon/Lycra blend for moisture wicking and comfort
- ANSI/ISEA 105-2016 Cut Level 1
- EN388 - 3121A
- SMARTSWIPE™ Touchscreen Compatible Fingertips
- Breathable glove design
- Ideal for material handling and general purpose applications
- Color-coded band for easy cut level identification
- Ideal use for material handling and general purpose remodeling applications
Specifications
Size | Large |
Glove Material | Nylon |
Color / Finish | Red/Black |
Visual Design | Solid Color |
Cuff Design | Knit |
Insulated | No |
Anti-Slip Grip | Yes |
Removable Liner | No |
Reinforced Fingertips | No |
Water Resistant | No |
Flame Resistant | No |
High Visibility | No |
Machine Washable | Yes |
Gender | Unisex |
Package Quantity | 1 |
ANSI/ISEA 105-2016 Standard | A1 |
The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 1 Nitrile Dipped Gloves are designed to be more durable and provide better protection. The soft and comfortable liner wicks away moisture during extended wear, while the nitrile coating provides better grip and durability. These Milwaukee Nitrile Dipped Gloves allow for improved dexterity and easier mobility when handling small objects. SMARTSWIPE™ fingertips & palms provide full access to touchscreen devices without removing the gloves. MILWAUKEE® Nitrile Dipped Gloves feature a color-coded wrist band and back of hand logo for easy cut level identification.
Features
- Soft & Comfortable Liner
- Sandy Nitrile Coating for Better Grip
- Improved Dexterity for Easier Mobility when handling small objects
- Nylon/Lycra blend for moisture wicking and comfort
- ANSI/ISEA 105-2016 Cut Level 1
- EN388 - 3121A
- SMARTSWIPE™ Touchscreen Compatible Fingertips
- Breathable glove design
- Ideal for material handling and general purpose applications
- Color-coded band for easy cut level identification
- Ideal use for material handling and general purpose remodeling applications
Specifications
Size | Extra Large |
Glove Material | Nylon |
Color / Finish | Red/Black |
Visual Design | Solid Color |
Cuff Design | Knit |
Insulated | No |
Anti-Slip Grip | Yes |
Removable Liner | No |
Reinforced Fingertips | No |
Water Resistant | No |
Flame Resistant | No |
High Visibility | No |
Machine Washable | Yes |
Gender | Unisex |
Package Quantity | 1 |
ANSI/ISEA 105-2016 Standard | A1 |
The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 1 Nitrile Dipped Gloves are designed to be more durable and provide better protection. The soft and comfortable liner wicks away moisture during extended wear, while the nitrile coating provides better grip and durability. These Milwaukee Nitrile Dipped Gloves allow for improved dexterity and easier mobility when handling small objects. SMARTSWIPE™ fingertips & palms provide full access to touchscreen devices without removing the gloves. MILWAUKEE® Nitrile Dipped Gloves feature a color-coded wrist band and back of hand logo for easy cut level identification.
Features
- Soft & Comfortable Liner
- Sandy Nitrile Coating for Better Grip
- Improved Dexterity for Easier Mobility when handling small objects
- Nylon/Lycra blend for moisture wicking and comfort
- ANSI/ISEA 105-2016 Cut Level 1
- EN388 - 3121A
- SMARTSWIPE™ Touchscreen Compatible Fingertips
- Breathable glove design
- Ideal for material handling and general purpose applications
- Color-coded band for easy cut level identification
- Ideal use for material handling and general purpose remodeling applications
Specifications
Size | Small |
Glove Material | Nylon |
Color / Finish | Red/Black |
Visual Design | Solid Color |
Cuff Design | Knit |
Insulated | No |
Anti-Slip Grip | Yes |
Removable Liner | No |
Reinforced Fingertips | No |
Water Resistant | No |
Flame Resistant | No |
High Visibility | No |
Machine Washable | Yes |
Gender | Unisex |
Package Quantity | 1 |
ANSI/ISEA 105-2016 Standard | A1 |
The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 1 Nitrile Dipped Gloves are designed to be more durable and provide better protection. The soft and comfortable liner wicks away moisture during extended wear, while the nitrile coating provides better grip and durability. These Milwaukee Nitrile Dipped Gloves allow for improved dexterity and easier mobility when handling small objects. SMARTSWIPE™ fingertips & palms provide full access to touchscreen devices without removing the gloves. MILWAUKEE® Nitrile Dipped Gloves feature a color-coded wrist band and back of hand logo for easy cut level identification.
Features
- Soft & Comfortable Liner
- Sandy Nitrile Coating for Better Grip
- Improved Dexterity for Easier Mobility when handling small objects
- Nylon/Lycra blend for moisture wicking and comfort
- ANSI/ISEA 105-2016 Cut Level 1
- EN388 - 3121A
- SMARTSWIPE™ Touchscreen Compatible Fingertips
- Breathable glove design
- Ideal for material handling and general purpose applications
- Color-coded band for easy cut level identification
- Ideal use for material handling and general purpose remodeling applications
Specifications
Size | Medium |
Glove Material | Nylon |
Color / Finish | Red/Black |
Visual Design | Solid Color |
Cuff Design | Knit |
Insulated | No |
Anti-Slip Grip | Yes |
Removable Liner | No |
Reinforced Fingertips | No |
Water Resistant | No |
Flame Resistant | No |
High Visibility | No |
Machine Washable | Yes |
Gender | Unisex |
Package Quantity | 1 |
ANSI/ISEA 105-2016 Standard | A1 |
Features
- Zipper Closure.
- Dual mic tabs at shoulders.
- 2" parallel heat transfer segmented reflective tape.
- 3" contrasting black trim detail.
- 100% high visibility polyester mesh with solid twill pockets.
- Multiple horizontal and two vertical reflective stripes.
- Radio chest pocket with clear ID holder.
- Segmented chest pencil pocket.
- Large, lower front pockets.
- Inside open tablet sized pockets.
- Full "plan" pocket on back.
- Rear D-Ring pass through.
- Tether & flagging tape grommets.
- 1" heavy webbing reinforcements.
- Durable stitch reinforcement at major stress points.
- Meets ANSI/ISEA 107-2010 Standards.
Specifications
Brand ID | DEWALT |
Product Color | Green |
Product Size | L |
HazMat? | No |
Product Length [IN] | 13.5 |
Product Width [IN] | 11 |
Product Height [IN] | 1.5 |
Product Cube [CI] | 222.75 |
Product Weight [LB] | 1.0656 |
MCR Safety Ninja® gloves are engineered to provide the highest level of innovation. Each of the offerings in the Ninja® series include a unique shell and polymer combination incorporating the latest in hand protection technology. Our Ninja® Glove Line offers the greatest assortment of dexterity, sense of touch, and protection. The Ninja® Lite features an 18 gauge blue nylon shell and black PU coated palm and fingertips. Latex Free. (Vending Packaged option available - VPN9696). Looking for the best work gloves? Look no further than MCR Safety.
Features
- 18 Gauge Athletic Grade Nylon Shell
- PU Coated Palm and Fingertips
- Latex Free
- Feather-light second skin feeling
- 30% Lighter for Greater Tactile Sensitivity
- Excellent dexterity
Specifications
Material | Nylon |
Insulated | No |
ActiFresh® | Yes |
Palm/Polymer Type | Polyurethane |
Gauge | 18 Gauge |
Made in USA | No |
Hem Color | White |
Hemmed | Yes |
Dots - Blocks - Coatings | Coated Palm |
Finger Style | Standard |
Cuff Material | Knitted |
Cuff Style | Knit Wrist |
Glove Size | Large |
The GloWear 8935 Hi-Vis Sun Hat is a lightweight and breathable sun protection hat for face and head shade while working outdoors. This 150D polyester sun hat features a wide brim for complete coverage, while 360-degree mesh venting maximizes airflow for breathable comfort. The hi-vis colors (lime or orange) and 1in //2.5cm reflective tape are ANSI 107-approved to keep workers safe and seen. This sun protection hat is available in three sizes (S/M, L/XL, 2XL/3XL) to fit a variety of head sizes. Machine wash as needed and hang to dry. Ideal for those working in hot environments where shade and cooling is needed, including agriculture and landscaping. Can also be used for outdoor recreation such as hiking, fishing or gardening.
Features
- LIGHTWEIGHT SUN PROTECTION 150D polyester hat with wide brim to shade face and head for comfortable protection against sun damage
- BREATHABLE 360-degree mesh venting for maximum airflow
- ENHANCED VISIBILITY Made with ANSI 107-approved hi-vis fabric and 1" reflective tape to keep workers safe and seen
- DRAWSTRING CORD For a secure fit
- BRIM WIDTH 2.5in // 6.5cm
- THREE SIZES S/M (21-22.5in // 53.3-57.1cm), L/XL (22.5-24in // 57.1-60.9cm) and 2XL/3XL (24-25.5in // 60.9-64.7cm)
- MACHINE WASHABLE
- PATENTED
Specifications
Color | Orange |
Item Size | S/M |
When you have a sensitive job to tackle like working in a crime lab, crime scene cleanup, forensic uses, embalming, research and emergency medical response the Kleenguard Chemical Resistant Suit (A60 Bloodborne Pathogen & Chemical Splash Protection Coveralls) is a great solution. They are designed to protect the wearer, as they pass the ASTM F1670/F1671 test for penetration of blood, body fluids and bloodborne pathogens, and they provide protection against some chemicals (chemical protection suit). They feature the Reflex Coverall Design, which provides a fuller cut for added range of motion, are 7.5 less likely to rip out (vs. ANSI minimums), are 6% longer body length and 12% more chest room. This model comes with a zipper front (with storm flap), and elastic hood, back, wrists and ankles.
Features
- Passes ASTM F1670/F1671 testing for penetration of blood, body fluids and bloodborne pathogens
- Reflex Coverall Design offers excellent fit and freedom of movement; this model has elastic back, hood, wrists and ankles
- Seamless front to provide more protection in the primary exposure area, with taped storm flap and serged seams
- Features three layer fabric construction features a middle layer of microporous film that allows heat and sweat vapor to escape, keeping the worker cool and outer layer film barrier against tearing and abrasion; Passes NFPA 99 for antistatic materials
Specifications
Kimberly-Clark Product Code | 45023 |
Brand | KleenGuard |
Color | Blue |
Style | Zipper Front, Storm Flap, Elastic Back, Wrists, Ankles & Hood |
Process Chlorine Free | No |
Recyclable Container | No |
Quantity/Unit | 1 Unit(s) / Pack |
Units/Case | 24 Pack(s) / Case |
Quantity/Case | 24 Unit(s) / Case |
KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits - allowing for maximum productivity and safety for you and your employees. Giving your employees what they need to do their job safely and effectively is a top priority of any business owner. KleenGuard™ Nemesis Safety Eyewear's stylish good looks and durable, lightweight construction are just some of the reasons why millions of people wear them for protection both at work and at home. Nemesis Safety Glasses have polycarbonate lenses that provide 99.9% UVA/ UVB/UVC protection to help prevent eye damage like cataracts, retinal damage, and other conditions that can cause temporary vision loss. The wraparound frame has a base curve of 8 that extends the range of peripheral protection, as well as soft touch temples for comfort. The Nemesis safety glasses have a patented nose piece designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose ? all for long-term comfort. Each pair of KleenGuard™ Nemesis safety glasses come with a neck cord for securing them, so that the glasses are ready to protect at a moment's notice. The safety eyewear is manufactured to comply with the ANSI / ISEA Z87.1+ standard for personal eye protection. Both men and women will find these stylish glasses to be comfortable and functional for construction, manufacturing, gun shooting / shooting range, and a host of other industries. Remember: comfort and style drive compliance, so it pays to provide comfortable designer glasses that your staff will be proud to wear. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).
Features
- These KleenGuard™ Nemesis Safety Glasses have a black frame and clear lenses - ideal for indoor use
- KleenGuard™ V30 Nemesis Safety Glasses feature a sporty, flexible, lightweight design that your employees will be happy to wear; they have a stylish, sporty look and feel
- Meets ANSI Z87.1+ standards for personal eye protection
- Polycarbonate lenses provide 99.9% UVA/ UVB/UVC
- Patented FLEX-DRY* designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose ? all for long-term comfort
Specifications
Sub Brand | Nemesis |
Unit Size | Universal |
Options | 6 Frame Colors & 13 Lens Color/Coatings available |
Frame Color | Black |
Lens Coating | Uncoated |
RightCycle | Yes |
Weight | 0.060 |
Each Dimensions | 2.000 x 4.625 x 10.000 |
KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits allowing for maximum productivity and safety for you and your employees. Giving your employees what they need to do their job safely and effectively is a top priority of any business owner. KleenGuard™ Nemesis Safety Eyewear's stylish good looks and durable, lightweight construction are just some of the reasons why millions of people wear them for protection both at work and at home. Nemesis Safety Glasses have polycarbonate lenses that provide 99.9% UVA/ UVB/UVC protection to help prevent eye damage like cataracts, retinal damage, and other conditions that can cause temporary vision loss. The wraparound frame has a base curve of 8 that extends the range of peripheral protection, as well as soft touch temples for comfort. The Nemesis safety glasses have a patented nose piece designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose all for long-term comfort. Each pair of KleenGuard™ Nemesis safety glasses come with a neck cord for securing them, so that the glasses are ready to protect at a moment's notice. The safety eyewear is manufactured to comply with the ANSI / ISEA Z87.1+ standard for personal eye protection. Both men and women will find these stylish glasses to be comfortable and functional for construction, manufacturing, gun shooting / shooting range, and a host of other industries. Remember: comfort and style drive compliance, so it pays to provide comfortable designer glasses that your staff will be proud to wear. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).
Features
- These KleenGuard™ Nemesis Safety Glasses have a black frame and clear lenses ideal for indoor use
- KleenGuard™ V30 Nemesis Safety Glasses feature a sporty, flexible, lightweight design that your employees will be happy to wear; they have a stylish, sporty look and feel
- Meets ANSI Z87.1+ standards for personal eye protection
- Polycarbonate lenses provide 99.9% UVA/ UVB/UVC
- Patented FLEX-DRY* designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose all for long-term comfort
Specifications
Sub Brand | Nemesis |
Unit Size | Universal |
Options | 6 Frame Colors & 13 Lens Color/Coatings available |
Frame Color | Black |
Lens Coating | Uncoated |
RightCycle | Yes |
Weight | 0.060 |
Each Dimensions | 2.000 x 4.625 x 10.000 |
Nitrile gloves are three times more puncture resistant than rubber and can be used to offer superior resistance to many types of chemicals. This glove is an excellent alternative for individuals who experience allergic reactions to latex. The 5319 series is a flock lined industry grade nitrile glove that is 15 mil in thickness and 13 inches long. Component materials comply with all federal regulations for food contact. The 5319 also has a raised diamond pattern in the palm for additional grip. Looking for the best flock lined nitrile gloves? Look no further than MCR Safety!
Features
- 15 mil flock lined green nitrile gloves
- 13 inch length
- Component materials comply with all federal regulations for food contact
- Industry grade
- Raised diamond grip
- Straight cuff
- Straight thumb
- Chemical resistant nitrile gloves
Specifications
HI VIS | No |
Reflective | No |
Material | Nitrile |
Insulated | No |
ActiFresh® | No |
Palm/Polymer Type | Nitrile |
Thumb Style | Straight |
Ambidextrous | No |
Made in USA | No |
Hemmed | No |
Sterility | Non-Sterile |
FDA Accepted Materials | Yes |
Mil Thickness | 15 mil |
Finger Style | Standard |
Cuff Material | Nitrile |
Cuff Style | Straight |
Grade | Industrial Grade |
Overall Length | 13 in. |
Lining | Flocked |
Glove Size | Large |
Features
- Abrasion-resistant long hard cap
- 840D nylon fabric cover
- 12mm NBR foam padding cut to hug the knee
- Nickel-plated grommets
- Hook and loop closure
Specifications
Color | White Cap |
Ce Marking | CAT 1 |
Material Content | 30% nylon, 25% polyester, 20% rubber foam, 15% polyethylene, 5% iron, 5% other |
Features
- Non-marring long cap
- 840D nylon fabric cover
- 12mm NBR foam padding cut to hug the knee
- Nickel-plated grommets
- Hook and loop closure
Specifications
Color | Tan Cap |
Ce Marking | CAT 1 |
Material Content | 30% nylon, 25% polyester, 20% rubber foam, 15% thermoplastic rubber, 5% iron, 5% other |