Cordless Power Tools

The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.

The MILWAUKEE® M12™ Mounting Fan delivers 18V air speed anywhere on the jobsite, providing air performance up to 14 MPH and 400 CFM. The fan's 6 inch blade propels air at a fast rate, allowing for quick and efficient cooling, drying, or ventilation. This mountable fan is compact with integrated features for users to easily mount it in various locations around the jobsite. The Milwaukee cordless M12™ Mounting Fan has powerful magnets, a 2 inch spring-loaded clamp, keyholes, and pass-through holes to deliver air movement wherever needed. This battery powered fan provides users with unlimited directional airflow with 360-degree head rotation. The Milwaukee cordless jobsite fan offers three-speed settings - high, medium, and low, providing optimal air speed control. With up to 16 hours of run time on a MILWAUKEE® M12™ XC 6.0 battery, the M12™ Fan provides all day run time on a single battery charge (batteries and charger sold separately).

The MILWAUKEE® M18 FUEL™ Compact Vacuum provides powerful performance and ultimate versatility to excel in small-area and spot clean-up applications on the jobsite. Armed with a POWERSTATE™ Brushless Motor and exclusive two-stage debris separation, the compact shop vac is optimized for dry jobsite debris. The two-stage debris separation divides small and large particles into the bagless canister prior to entering the filter. This delivers up to 50% more sustained suction versus the competition and more efficient clean-up. For maximum versatility, the portable vacuum's orientation and quick-change accessories can be manipulated from upright use at ground level, waist level, or for use overhead. It comes fully equipped with an extension wand, powered floor tool, floor tool, flexible hose, crevice tool, utility tool, brush tool, accessory holder, HEPA filter, and foam pre-filter.

The MILWAUKEE® M18 FUEL™ 1/2" Hammer Drill Driver is the Industry's Most Powerful Hammer Drill, delivering the capability to drill the largest holes at high speed into the densest materials. The cordless drill is the Most Compact solution in its class and features AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 6.9" in length, this is the most compact cordless drill in its class for the best access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up with the best reaction time in the industry. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating, and over-discharge. The MILWAUKEE® M18™ REDLITHIUM™ battery packs deliver more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best-in-class. This provides increased grip strength, durability, and corrosion resistance.

The DEWALT 20V Cordless Dry Hand Vacuum (Tool only) is a jobsite cleaning solution that provides users with powerful performance (46 CFM) to pick up common jobsite debris ranging from drywall, dust, to small screws and nails. This versatile vacuum comes with 6 different cleaning attachment accessories to tackle any cleaning job from floor level to overhead. The hand vacuum can be used to handle smaller messes or used in combination with the extension tube and floor accessory to clean up floor areas. A bright LED light illuminates the darkest areas. A HEPA Filter allows for clean efficient cleanup of fine dust and drywall and follows OSHA Table 1 Compliance under housekeeping rules. It comes fully equipped with an extension tube, floor nozzle, flexible hose, crevice nozzle, gulper brush, round brush, belt hook, accessory holder, and HEPA filter. Up to 21.4 minutes of runtime per charge using DCB205 battery (sold separately). Can fill up to 15 tank fills per charge using DCB205 battery (sold separately).

The MILWAUKEE® M18™ Brushless 18" Fan delivers corded performance anywhere on the job site, providing air circulation over 50 ft and up to 13.5 MPH. The 18-inch blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base and shroud design withstands demanding job site environments and delivers impact, water, and dust resistance. This lightweight, mobile fan can adapt to any location with 360 degrees of rotation and 5 hours of use on high with the M18™ HD12.0. The integrated AC plug offers the versatility to plug in a standard extension cord for extended runtime. For optimized storage and transportation, this fan has an interlocking stackable design. The new M18™ Brushless 18" Fan delivers CORDED PERFORMANCE. DURABLE COOLING. TOTAL MOBILITY.

The MILWAUKEE® M12 FUEL™ ProPEX® Expander unlocks a breakthrough in productivity for plumbing installers, delivering the fastest 3/8"-1" expansions. Featuring an auto-rotating head, the expander provides uniform expansions for the most consistent installations. In combination with the ProPEX® Expander Heads with RAPID SEAL™, installers will experience up to 65% faster sealing of connections as temperatures decrease, reducing the time before pressure testing. An extended dual actuating trigger and a compact right-angle design provide easy access in tight locations. All-metal gears and an integrated metal frame deliver maximum durability on the job site. The POWERSTATE™ Brushless Motor offers the fastest expansions yet runs cooler with no wearable components. The REDLITHIUM™ 2.0 Compact Battery Pack provides up to 20% more power, 2X more recharges than standard lithium-ion batteries, and best-in-class performance in extreme jobsite conditions. REDLINK PLUS™ intelligence ensures optimized performance and protection from overload, overheating, and over-discharge. The onboard fuel gauge helps monitor the charge more accurately, so there's less downtime on the job.

The M18™ 2 Gallon wet/dry vacuum provides users with a powerful and portable wet/dry clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 battery pack, its ideal for extended spot and area clean up.

The M18 FUEL™ Super Hawg™ delivers the power and run-time necessary to complete full cordless rough-ins. Optimized for plumbing, pipe fitting and HVAC professionals, this drill powers through 6-1/4 in. holes and can drill over (100) 2-9/16 in. holes per charge in 2x dimensional lumber with a self-feed bit. The POWERSTATE brushless motor generates the same power and speed in application as a corded right angle drill. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM HIGH OUTPUT™ 6.0 batteries delivers the power and run-time necessary to complete cordless rough-ins. A mechanical clutch in low speed protects the tool from damage in the case that a bit binds up and the tool stalls.

The DCH133B 20V Max XR Brushless 1-inch D-Handle Rotary Hammer is a compact light weight high-performance rotary hammer that has a durable German engineered mechanism that delivers 2.6 joules of impact energy. At the heart of this tool is the DEWALT brushless motor and durable rotary hammer mechanism. With its better than corded speed of application, compact size, light weight and balanced design, this DEWALT cordless hammer drill can replace your corded tool. The mechanical clutch enhances user control in a bind up situation and can help minimize sudden torque reaction. The DCH133 is dust extraction ready for the D25301D.

The Milwaukee® M18™ brushless threaded rod cutter is a dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4 in., 3/8 in. and 1/2 in. mild steel to 1/4 in. and 3/8 in. stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0 Ah battery. The four-sided cutting dies allow users to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides users with a stable surface for bench top cuts.

Rapidly fasten and remove bolts, nuts, and other fasteners with this XTREME 12V MAX Brushless Cordless 3/8 in. Ratchet. Designed for long-lasting performance, the ratchet delivers 60 ft-lbs of max torque for jobs in compact spaces while its glass-filled nylon housing helps prevent damage from harsh chemicals and solvents on the worksite. Keep productivity high by brightening work areas with its integrated LED worklight and adjust the output speed as needed with the variable speed trigger. Battery and charger not included.

When the project calls for quick fastening or removal, trust this XTREME 12V MAX Brushless Cordless 1/4 in. Ratchet to help you complete the job. Engineered to fasten and remove small nuts, bolts, and other fasteners in hard-to-reach work areas, this power tool delivers the durability and versatility needed to handle a variety of applications with its 1/4 in. square drive and 40 ft-lbs of max torque. Designed to resist the effects of harsh jobsite chemicals and solvents, the ratchet features a protective, glass-filled nylon housing to help deliver long-lasting performance. Manual operation is also an option to tackle stubborn fastening applications. Battery and charger not included.

The MILWAUKEE® M18 FUEL™ 1/4" Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. MILWAUKEE® POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control. MILWAUKEE® REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. MILWAUKEE® M18™ REDLITHIUM™ Battery Packs deliver more work per charge and more work over the life of the pack. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. This new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows. The M18 FUEL 1/4" Hex Impact Driver is part of MILWAUKEE® M18 system which is fully compatible with over 200+ solutions.

The DEWALT DCS494B 20V MAX 14ga Swivel Head Double Cut Shears, Bare tool is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. This is a bare tool times, battery sold separately. Includes: (1) DCS494 shears, (1) Hex wrench.

The DEWALT DCS491B 20V max 18 gauge swivel head Shears features a 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort. Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts. Cordless Shears allows user to take the tool to the work place. Specifications: capacity (stainless steel) - 20 gauge, capacity (mild steel) - 18 gauge, strokes/min - 0-2,300 SPD, min cutting Radius - 5.5 inches. Includes: (1) 20V max swivel head Shear bare tool. (Tool only / battery sold separately)

With the introduction of the new M18™ cordless shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an in-lbs wrist design that maximizes control during use. Also adding the industry's only tool-free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® cordless shears are changing the way tradesmen work on the jobsite today.

The 20V MAX Brushless 1-1/8-inch Rotary Hammer is a high-performance drill powered by a brushless motor and a durable German-engineered mechanism, delivering 3.0 Joules of impact energy. The lightweight design makes this tool ideal for forming, #3 to #5 post installed rebar dowelling, tilt wall support, rod hanging, beam & column anchorage, and steel stanchion mounting. DEWALT cordless hammer drill is part of the PERFORM and PROTECT product line, integrated with the SHOCKS ACTIVE VIBRATION CONTROL System and becomes OSHA Table 1 Compliant when used with the DWH205DH On Board Extractor.

This Compact Bandsaw is lightweight at 6.6 lbs. with an integrated guard, making it ideal for overhead and one-handed cutting applications. The 1-3/4 in. cut capacity allows for cuts in small-sized metal diameters found on the jobsite. Adjust to the required speed for cutting through stainless-steel, strut, and all thread with the variable-speed trigger and speed dial. Hang this bandsaw in between cuts with the integrated hang hook and illuminate the cutting area with the LED. This tool is LAYNARD READY compatible and Tool Connect Chip-Ready.

The MILWAUKEE® M18 FUEL™ 1" SDS Plus Rotary Hammer Kit is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL™ 1" SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP™ Control for enhanced safety, and can drill up to (125) 3/8" x 2" holes per charge when paired with the M18™ HIGH OUTPUT™ XC6.0 Battery. The POWERSTATE™ Brushless Motor delivers 2 ft-lbs of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS™ intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over-discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery delivers 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC batteries. This hammer provides maximum control and enhanced safety with the AUTOSTOP™ Kickback Control. This feature prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. Milwaukee's AVS Anti-Vibration System minimizes vibration for maximum comfort.

The MILWAUKEE® M18 FUEL? 1" SDS Plus Rotary Hammer is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL? 1" SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP? Control for enhanced safety, and can drill up to (125) 3/8" x 2" holes per charge when paired with the M18? HIGH OUTPUT? XC6.0 Battery. The POWERSTATE? Brushless Motor delivers 2 ft-lbs of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS? intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over-discharge. The M18? REDLITHIUM? HIGH OUTPUT? XC6.0 Battery delivers 50% more power while running 50% cooler than the M18? REDLITHIUM? XC batteries. This hammer provides maximum control and enhanced safety with the AUTOSTOP? Kickback Control. This feature prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. Milwaukee's AVS Anti-Vibration System minimizes vibration for maximum comfort.

The MILWAUKEE® M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum is the first cordless 12V wet/dry vacuum of its kind. It delivers up to 40% more suction than 18V competitors, is the most compact, and is up to 2X quieter compared to other common wet/dry vacuums. The POWERSTATE™ brushless motor delivers up to 45 CFM and 42" of suction. It's compact footprint stores neatly in a van or cart with a stackable design and organized on-board storage conveniently keeps the attachments inside of the unit. It also comes with a wall mount hanging plate for increased storage options. With 14 minutes of runtime on high and 26 minutes on the low setting, this compact vacuum cleaner is ideal for spot and service focused wet/dry quick clean up needs. The cordless wet/dry vac (0960-20) comes with a flexible hose, crevice tool, utility nozzle, wall mount, and a certified HEPA filter.

The DCH481X2 60V Max Brushless 1-9/16" SDS Max Combination Hammer is a light weight high-performance hammer that is powered by a DEWALT brushless motor and durable German engineered mechanism. The DCH481 delivers 6.1 joules of impact energy for fast drilling, even in the hardest concrete. The light weight design makes it ideally suited for horizontal serial drilling for #4 - #8 rebar, dry coring and chipping in any mid to upper wall and ceiling application. The patented E-Clutch system provides enhanced control to the user in a bind up situation and can help minimize sudden torque reaction compared to standard clutches. The Active Vibration Control technology employed delivers reduced user vibration for less user fatigue and greater productivity. With its balanced design, SHOCKS Active Vibration Control technology and Extreme Run Time, this hammer is ideally suited for all day use, even in the hardest concrete.

Tackle demanding jobs with this high-performance ATOMIC 20V MAX 5/8 in. Brushless Cordless SDS Plus Rotary Hammer. The DEWALT brushless motor and durable German-engineered mechanism deliver 1.4 Joules of impact energy. The lightweight and compact design makes this tool ideal for rod hanging, concrete forming, cable tray and strut mounting, clip and bracket mounting, and railing mounting. It is part of the PERFORM and PROTECT product line, integrated with the SHOCKS ACTIVE VIBRATION CONTROL System and becomes OSHA Table 1 Compliant when used with the DWH200D shroud and DWH161D1 dust extractor. Battery and charger sold separately.

The 20V MAX XR Brushless 1-1/8 in. Rotary Hammer is a high-performance drill powered by a brushless motor and a durable German-engineered mechanism, delivering 3.5 Joules of impact energy. The lightweight design makes this rotary hammer ideal for structural connections, beam & column anchorage, rod hanging, seismic & safety attachments, cable tray & strut mounting, and steel stanchion mounting. It is part of the PERFORM and PROTECT product line, integrated with the Anti-Rotation E-CLUTCH System and the SHOCKS ACTIVE VIBRATION CONTROL System. E-CLUTCH protects the user in bind-up situations by stopping the rotation of the bit. SHOCKS reduces vibration felt by the user at the handles, compared to rotary hammers without this feature. This hammer becomes OSHA Table 1 Compliant when used with the DWH304DH On Board Extractor.

The MILWAUKEE® M18 FUEL™ 6 Gallon Wet/Dry Vacuum brings unmatched performance, durability, and versatility to jobsite cleanup. The POWERSTATE™ Brushless Motor and optimized components Outperform 3.5 Peak HP Wet/Dry Vacuums, delivering more cleaning power than corded. The wet/dry vac cleans up more common jobsite debris like drywall dust, concrete dust, and wood/metal shavings than 3.5 peak HP wet/dry vacuums in the same amount of time. This wet/dry vacuum provides the Most Durable Wheels and Hoses with reinforced casters and tread design for up to 8X wheel life. The crush and twist-resistant hose construction deliver up to 2X hose life. This vac is part of the Most Versatile Wet/Dry Vacuum System with interchangeable motor heads, tanks, and carts for varying performance, holding capacity, and mobility with the easy access foot pedal. MAX POWER MODE delivers up to 31 minutes of continuous cleaning time (up to 1,000 ft²) per charge on an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack. MAX RUN-TIME MODE delivers up to 47 minutes of continuous cleaning time (up to 1,300 ft²) per charge on an HD12.0 Battery Pack. The included Large High-Efficiency Filter ensures optimal dust and microparticle collection. Milwaukee Fleece Dust Bags can be used for less debris build-up on the filter. Integrated accessory storage allows for easy access to the crevice tool and utility nozzle on the motorhead, with more accessory storage spots on the removable wet/dry vacuum cart.

The MILWAUKEE® M12 FUEL 16-Gauge Variable Speed Nibbler is a compact light weight tool that provides the same cutting capacity as its 18V competitors on a 12V system. Delivering fast clean cuts in 16-gauge mild steel, the nibbler is rated for 18-gauge stainless steel and 12-gauge aluminum. Milwaukee M12 FUEL 16-Gauge Variable Speed Nibbler has the power to perform in heavy applications such as cutting up to 22-gauge spiral duct seams. The nibbler tool provides a variable speed dial, tool-free die holder orientation change, and LED work light offers maximum control and productivity. The unique chip collection bag, kitted with the tool, reduces jobsite cleanup. The Milwaukee compact and light weight form factor enables greater access and mobility on the jobsite.