Cordless Power Tools

The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.

Ideal for service repairs and small jobs, this 20V MAX 15 degree Cordless Coil Roofing Nailer delivers cordless convenience. There are absolutely no hoses, compressors, or gas cartridges required. its 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15 degree Cordless Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.

Take on a wide range of drilling jobs with the incredible versatility offered by the XTREME 12V MAX Brushless Cordless 5-in-1 Drill/Driver Kit. Designed to improve access in hard-to-reach spaces, this Multi-Head Drill/Driver features 4 dedicated attachment solutions. Drill and fasten in confined spaces with ease using the 1/4 in. hex right angle attachment, while the 1/4 in. hex quick release offset accessory delivers high performance in challenging corner spots. Conveniently load 1/4 in. hex accessory bits using one hand with the 1/4 in. hex quick release add-on, then tackle precision applications like drilling small pilot holes with the 3/8 in. ratcheting chuck attachment. Keep your bits close at hand with the built-in 1/4 in. hex bit holder with internal magnet for short tool length. At less than 5 in. long, this compact tool offers pro-level usability with 2-speed transmission and 15 clutch settings for the control you need to complete a variety of projects. Includes a DCB122 12V MAX 2.0Ah Battery, DCB112 Charger, Belt Hook, and Kit Bag.

Spots farther, lasts longer  the new TRUEVIEW™ M12™ LED spot light gives professionals the most portable, high performance spotlight to illuminate, identify, and diagnose on and off the jobsite. The 2353-20 has a beam distance of 700 Yd., offering the ability to spot objects and areas a long distance away. It has high and a low output modes of operation for long distances, more clarity in closer situations, as well as a strobe mode for safety situations. The M12™ LED spot light can run for up to 4 hours in its high mode with an M12™ REDLITHIUM™ XC 4.0 battery pack, and up to 8 hours in low and strobe modes. The 2353-20 is impact and water resistant to survive professional use, and it features an impact-resistant lens cover. Its high quality LED never needs to be replaced, and is backed by a Limited Lifetime Warranty.

Get the power and cutting depth of corded with the portability and convenience of cordless with the XTREME 12V MAX 5-3/8 in. Brushless Cordless Circular Saw Kit. As part of the DEWALT XTREME Sub-Compact Series, this circular saw delivers high performance and precision for accurate cuts in a variety of materials. Its lightweight build lets you quickly adjust the bevel capacity without additional tools and attachments. The tools saw blade minimizes accidental cutting by automatically stopping when the trigger is released. When the work day is done, conveniently store the tool using the integrated rafter hook.

The M12 FUEL™ 1/2 in. Digital torque wrench with ONE-KEY™ is the industry's first torque wrench with a motor, delivering increased productivity, precise torque accuracy, and user demanded reporting functionality. This tool delivers 50% faster installation time, replacing the hand tool or two tool installation process and providing more control to reduce the over torquing of fasteners. The 1/2 in. digital torque wrench provides 12.5-150ft-lbs of torque range and accuracy within 2% of full scale for torque critical fasteners. This battery powered torque wrench is equipped with Milwaukee ONE-KEY™ giving you the power to track, report, and manage your tool. This tool will record all of the fasteners that are saved and produce a downloadable report via ONE-KEY™ for the necessary parties requiring the data. ONE-KEY™ allows you to wirelessly connect to a smart phone to customize the tool settings, track its location, manage inventory, and lock the tool out for added security and protection for your investment.

Designed for the professional carpenter, remodeler, and general contractor; the Milwaukee® M18 FUEL 3" x 18" Belt Sander is optimized for power, portability, and productivity on the jobsite. The Milwaukee® M18 FUEL™ 3" x 18" Belt Sander generates the power and torque of an 8A corded belt sander, delivers faster material removal, and collects over 80% of dusts generated. The POWERSTATE™ Brushless Motor and REDLINK PLUS™ intelligence delivers best-in-class belt speed at 1350 SFM with less bog down under load for more aggressive material removal and ensures protection from overload, overheating, and over discharge. The M18 REDLITHIUM High Output HO6.0 battery (not included) provides all-day run-time and unprecedented power to tackle the toughest applications found on the jobsite. The variable speed dial offers adjustment from 1350SFM to 750SFM for increased control in a wider variety of materials. The dust collection system paired with our durable dust bag or universal hose adapter reduces clean up time through a cleaner work environment. The tool-free, adjustable pommel allows for flush sanding against the front of the sander and offers a more compact size for storage. This battery-powered belt sander also features automatic belt tracking, a tool-free belt tracking knob, dual-LED lights, a tool-free belt change lever, and a lock on button.

The Milwaukee® M18 FUEL™ 21 degree framing nailer kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance. The M18 FUEL™ 21 degree framing nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. This kit includes one M18™ REDLITHIUM™ XC5.0 battery pack, an M18™ & M12™ multi-voltage charger, a rafter hook, non-marring tip, and a contractor bag.

Shines brighter. Grips stronger. Protects longer. The M12™ LED Underhood light delivers 1350 lm of TRUEVIEW™ high definition output for full engine coverage and clarity. Milwaukee's finish guard™ hooks provide lasting protection against scratches to a vehicle's finish. With 2X more gripping surface, get more contact for better positioning when mounting Underhood, undercarriage or elsewhere. Rotate, slide, remove and hang the light bar for added flexibility and versatility. The carrier extends 48 in. to 78 in. covering wide cars and trucks, perfect for mechanics working in automotive shops or fleet maintenance. Get up-to 8 hours of runtime when powered by a M12™ REDLITHIUM™ 4.0 XC battery pack. Built to withstand the toughest environments, this light is impact and chemical resistant, and covered by our 5 year tool warranty as well as a limited lifetime LED warranty.

The MILWAUKEE® M12™ 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23-gauge headless pin nails ranging in length from 1/2" to 1-3/8" and features all-day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack. This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 3-year limited power tool warranty. This 23-gauge pin nailer kit includes (1) M12™ 23GA Pin Nailer, (1) M12™ Charger, (1) M12™ REDLITHIUM CP1.5Ah Battery Pack, and a Contractor Bag.

Complete the toughest jobs utilizing the power of the DEWALT 20V MAX XR 1/2 in. High Torque Impact Wrench. Delivering 1030 ft-lbs. of max fastening torque and 1400 ft-lbs. of max breakaway torque, making it ideal for large sized pipe flanges, grooved couplings, wheel lugs, concrete anchor bolt setting and many other heavy-duty impact wrench applications. The PRECISION WRENCH mode is included to help prevent overtightening in forward, and run-off in reverse, for additional user control. Utilize the updated 4-mode push button switch to easily transition speeds and adjust LED brightness when needed. Battery and charger sold separately.

Our 20V MAX Corded/Cordless Air Inflator can run on any one of three power sources for maximum versatility: 20V MAX battery, 12V DC, or 110V AC. Use it on the jobsite, or on the go. Air inflator features a high-pressure rubber hose for durability. The threaded chuck and included onboard accessories make it easy to inflate items from tires to footballs. Setting desired air pressure is simple with the digital gauge, and the auto-shutoff provides accurate inflation. The high-volume hose allows fast inflation of mattresses and other inflatables with the push of a button. Move the hose to the deflation port for quick and easy take down. An onboard LED light of the portable tire inflator helps to provide illumination in dark spaces. Heavy-duty rubber feet help reduce walking while in use. Battery, charger, and AC power adapter are sold separately.

The ATOMIC 20V MAX 1/2 in. Cordless Impact Wrench with Detent Pin Anvil was designed to easily handle a wide variety of construction and assembly applications. Take advantage of up to 300 ft-lbs of max fastening torque and 450 ft-lbs of max breakaway torque in a compact design that you can quickly maneuver from spot to spot. This power tool allows the user to choose between 4 speeds while the Precision Wrench control feature and Timber Screw mode enhance its versatility, performance, and operability. Illuminate dimly lit work areas with this Cordless Impact Wrench's on-board LED work light and continue working even in dark spaces.

Take on a variety of fastening projects using the 20V MAX 3/8 in. Cordless Impact Wrench with Hog Ring Anvil Kit. The high-output Impact Wrench delivers the power needed for both large and small jobs with up to 250 ft-lbs of tightening torque and 400 ft-lbs of breakaway torque. Its compact, lightweight build was engineered for seamless maneuverability in tight spots. Dimly lit work conditions are no problem for this Cordless Impact Wrench, which features an on-board LED for visibility in dark spaces.

The DEWALT DCE560D1 20V MAX 10oz/300ml Adhesive Gun Kit offers the user a variable speed trigger which allows for increased control over the flow of your adhesive. It also has a variable speed dial that allow for setting maximum and minimum flow rates. This gun has an anti - drip feature that automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out and making a mess on your project. A Quick Connect inter-changeable canister trays allows user to quickly change between canister sizes. Capacity: 10oz, Speed: 21 in/min. Includes: 1) DCE560 Adhesive Gun, 1) Lithium Ion Battery, 1) Charger.

The MILWAUKEE® M18 FUEL™ 1/2" Compact Impact Wrench w/ Friction Ring Kit is the most compact in its class, delivering users the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.9" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. Milwaukee 1/2" compact impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers users greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. MILWAUKEE® REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. MILWAUKEE® M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.

The MILWAUKEE® M18 FUEL™ SAWZALL® Recip Saw is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL™ SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE™ Brushless Motor to provide 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK™ PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over-discharging. The M18™ REDLITHIUM™ XC5.0 Battery Pack (not included) delivers up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL™ SAWZALL® Recip Saw is designed to perform in the most demanding applications and is the most durable Milwaukee cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL™ SAWZALL® Recip Saw is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.

The MILWAUKEE® M18 FUEL™ SAWZALL® Recip Saw 1 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL™ SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE™ Brushless Motor to provide 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK™ PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over-discharging. The included M18™ REDLITHIUM™ XC5.0 Battery Pack delivers up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL™ SAWZALL® Recip Saw is designed to perform in the most demanding applications and is the most durable Milwaukee cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL™ SAWZALL® is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job. This M18 FUEL™ SAWZALL® Recip Saw Kit includes, (1) M18 FUEL™ SAWZALL® Recip Saw, (1) M18™ REDLITHIUM™ XC 5.0 Battery, and (1) M18™/M12™ Charger and a Case.

The MILWAUKEE® M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ Paddle Switch, No Lock is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP™ Brake. The M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP™ Brake provides stop times under 2 seconds with an abrasive disc. This battery-powered grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY™, this grinder wirelessly connects to a smartphone to track and manage the tool, providing visibility to where tools are across a network of jobs. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries (not included) deliver 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ is the next level of jobsite productivity and enhanced safety in cordless grinders.

The M18 FUEL™ 18ga 1/4" Narrow Crown Stapler delivers peak productivity on your job site, providing you with unmatched stapling performance without the hassle of a compressor and hose. We've leveraged our nitrogen air spring mechanism, to give the Narrow Crown Stapler the power to consistently sink staples to the proper depth in hard materials. This cordless stapler also has tool-free depth adjustment to drive staples in soft materials without blowing through. You can choose from sequential and contact actuation firing modes to meet your application's needs. The combination of our POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence provides you with a staple gun that delivers an unmatched fire rate with zero ramp-up time. This battery powered narrow crown stapler is compact and lightweight, giving you better access into tight spaces and limiting your fatigue throughout the day. The MILWAUKEE® M18 FUEL™ 18ga 1/4" Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes two work contact tips and a reversible belt hook.

The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.

The DEWALT DCF897P2 20v MAX XR High Torque 1/2-inch Impact Wrench w. Hog Ring Retention Pin Anvil (5.0 Ah) offers premium performance for fastening and breakaway; Up to 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque. With best in class ergonomics for comfortable use, this Impact Wrench has a compact design of 8-13/16-inch in length and weighs only 7.2 lbs. It features multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM), with an efficient motor design that allows for optimum runtime and variable speed settings. DEWALT impact wrench has a 3/4-inch hog ring with retention pin anvil, along with a LED light with 20 second delay for increased visibility in dark work areas. Kit includes: (1) DCF897 - 20v MAX XR Brushless High Torque 3/4-inch Impact Wrench with Hog Ring Anvil - Tool, (2) DCB205 - 5.0 Ah batteries, (1) Multi voltage charger.

The 20V MAX 21 degree Plastic Collated Cordless Framing Nailer delivers the performance demanded by pros to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4 in. and 0.148 in. diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.

The Milwaukee® M18™ FUEL™ 9 in. cut-off saw w/ ONE-KEY™ is an extremely versatile solution for cutting a large variety of materials. The M18 fuel 9 in. cut-off saw runs on Milwaukee's M18 REDLITHIUM batteries instead of using gas like most traditional cut-off saws . This saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being up to 50% lighter than gas saws that dominate the market today. By utilizing Milwaukee's M18 REDLITHIUM high output HD12.0 battery, this saw delivers no gas headaches. It produces no fumes so it can be used indoors, it starts up instantly, it eliminates the need to mix gas and oil, and there is no gas engine maintenance. The battery will also work on any of Milwaukee's other 200+ M18 solutions. The M18™ FUEL™ 9 in. cut-off saw also has ONE-KEY™ integrated so users can wirelessly connect the tool with their smart phone to track and manage the tool.

This 20V MAX XR 5-inch Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the wood sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.