Cordless Power Tools

Don't let a lack of electricity keep your team from being productive. If you are looking for cordless drills, saws, grinders, nailers, or more, Kinnunen is your #1 online source for all types of cordless power tools.

For a great deal, take a look at our cordless power tool combo kits. These combo kits come with multiple tools for a complete workshop solution or a tool alongside accessories.

Should you need a power tool that can be plugged in to a power outlet, take a look at our corded power tools.

Our team of experts is continually trained for the most up-to-date technology available on the field. So, if you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
|◀ 253 - 288 of 361 ▶|
View:

The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.

Features

  • 4.8" in length provides most access in tight spaces
  • The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque
  • Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
  • 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
  • Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque.
  • Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
  • Mode 1 RPMs - 0-800; Mode 2 RPMs - 0-1,650; Mode 3 RPMs - 0-2,400; Mode 4 RPMs - 0-2,400
  • Mode 1 IPMs - 0-1,000; Mode 2 IPMs - 0-2,400; Mode 3 IPMs - 0-3,500; Mode 4 IPMs - 0-3,500
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • Works in up to to 69kV environments
  • Compatible with all M18™ batteries & Chargers

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size3/8 In.
Impacts per Minute3500
Maximum Torque (ft-lbs)250
Variable SpeedYes
Maximum RPM2400
Length4.8 Inches
Case IncludedNo
Color / FinishRed/Black
MaterialAluminum
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)2.4
Number of Batteries Required1
Number of Batteries Included0
Battery Voltage (V)18
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedNo
CSA CertifiedYes
ETL ListedNo
UL ListedYes
Item#:
2854-20
Manufacturer Item:
2854-20
Your Price:
219.00
Each

Specifications

Height6.250 in
Length8.125 in
Width3.000 in
Weight2.375 lbs
MAXIMUM SPEED2800 RPM
Item#:
DCF890B
Manufacturer Item:
DCF890B
Your Price:
199.99
Each

The MILWAUKEE® M12 FUEL™ 1/4 in. High Speed Ratchet is part of the latest addition to Milwaukee's best-in-class lineup of ratchets. This cordless ratchet provides the fastest speed while installing and removing fasteners. The most compact head size in its class offers more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability expected from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing professionals to be more productive than any other battery-powered ratchet.

Features

  • Delivers up to 450 RPM for best-in-class productivity
  • 0.75" head profile allows for best-in-class access in tight spaces
  • Up to 35 ft-lbs. of max torque
  • Steel yoke housing for greater durability
  • Ratchet can be used manually without engaging the motor
  • LED light to illuminate work areas
  • On-board battery fuel gauge displays remaining run time
  • Extended paddle switch for multiple grip options
  • Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments
  • POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
  • REDLINK PLUS™ Intelligence prevents damage to the tool and battery due to overloading or overheating
  • REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
  • Part of the M12™ system, featuring 100+ tools

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Drive Size1/4 in
Maximum Torque (in-lbs)30
Maximum RPM450
Length10.3 Inches
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)12
Charger IncludedNo
Net Tool Weight (lbs)1.7
Weight - Battery Installed (lbs)2.1
Weight - Excluding Battery (lbs)1.7
Case IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2566-20
Manufacturer Item:
2566-20
Your Price:
179.99
Each

Features

  • 4-position blade clamp allows for flush cutting and increased positional versatility with tool-free blade changes
  • 1-1/8" stroke length delivers a fast cutting speed
  • Variable speed trigger with 0-3000 spm provides blade control for precision cuts
  • Pivoting adjustable shoe extends blade life and allows depth of cut control
  • Rubber over molded comfort grip delivers optimal comfort and control
  • Double oil sealed shaft resists contamination and increases durability

Specifications

Height12.130 in
Length19.300 in
Width4.030 in
Weight11.250 lbs
Power SourceBattery
Cordless Vs. CordedCordless
Motor TypeBrushed
Voltage20 V V
Battery IncludedYes
Battery Type20V MAX* Lithium Ion
Battery Qty2
Battery Weight1.4
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Battery Amp Hours5 Ah Ah
Watt Hours100
Net Lit-Ion Y/NYes
Charger IncludedYes
Charger TypeWall Mountable Charging Base
Amperage0.0
Battery RequiredYes
Charge Time90
Number Of Batteries Required1
RechargeableYes
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Prop 65 Generic WarningYes
Warranty3LW1YS90D
Certifications Or ListingsCSA Listed
California Prop 65 Warning Labelhttp://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
Claims NeededYes
File/Certification Number (Lowes Required)TBD/Transition
Hazmat CodeA1
App CompatibilityNo
Blade Stroke Length1.125 In
Bluetooth CompatibilityNo
Case TypeCase
Cuts IntoMetal
EngineBrushed
Handle TypeIn-Line
Housing MaterialPlastic
Individual Vs. Set (Syndigo)SET
Integrated Work LightNot Featured
Keyless/KeyedKeyless
Length Of Stroke1.125 in In.
Orbital ActionYes
Quick/Tool Less ChangingYes
Strokes Per Minute3000
Variable SpeedYes
Wifi CompatibilityNo
Works With AndroidNo
Works With IosNo
Item#:
DCS380P1
Manufacturer Item:
DCS380P1
Your Price:
279.99
Each

The MILWAUKEE® M18 FUEL™ 4-1/2" / 5" Grinder Paddle Switch, No-Lock Kit is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 4-1/2" / 5" Grinder generates 11A corded power allowing completion of the toughest grinding and cutting applications, all on the M18™ cordless system. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 4-1/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries deliver 50% more power while running 50% cooler than our M18™ REDLITHIUM™ XC Batteries and are compatible with 200+ Tools in the M18™ System. Experience faster accessory changes and less downtime, with tool-free accessory and guard adjustments while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 4-1/2" / 5" Grinder takes cordless grinders to the next level in performance and run-time.

Features

  • POWERSTATE™ Brushless Motor - Purposely built for the M18 FUEL™ 4-1/2" / 5" Angle Grinder delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications.
  • REDLINK PLUS Intelligence - Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
  • REDLITHIUM HIGH OUTPUT Battery Pack - Provides 50% more power and runs 50% cooler versus standard REDLITHIUM Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market.
  • Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions
  • Tool-Free Guard Adjustment for faster guard installations and adjustments
  • Tool-Free Accessory Changes with Integrated FIXTEC Nut Technology
  • Electronic Clutch for Kickback Protection
  • 5/8"-11 Spindle for Use with Common Grinding Accessories
  • Overload Protection to Maximize Motor Life
  • Anti-Vibration Side Handle for Increased User Comfort and Safety
  • Compatible with all M18 batteries

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Grinder TypeAngle
Maximum RPM8500
Arbor Size5/8 -11 UNC
Length15.8 Inches
Housing MaterialMetal, Plastic
Color / FinishRed/Black
Variable SpeedNo
Grinder Switch TypePaddle
Side HandleYes
Product Storage IncludedBag
Net Tool Weight (lbs)5.5
Weight - Battery Installed (lbs)5.5
Weight - Excluding Battery (lbs)3.1
Number of Batteries Required1
Number of Batteries Included2
Battery Voltage (V)18
Battery Ampere-hour (Ah)6.0
Battery Size18 Volt
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedYes
Grinding Wheel IncludedNo
Wheel Diameter (in)5
Handle TypeStraight
Electronic Speed ControlYes
Overload ProtectionYes
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2880-22
Manufacturer Item:
2880-22
Your Price:
429.99
Each

The MILWAUKEE® M18 FUEL™ 1" High Torque Impact Wrench w/ ONE-KEY™ is the first cordless 1" High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs of Nut-Busting Torque and 1,500 ft-lbs of fastening torque, making this the most powerful cordless impact torque wrench, able to complete the most demanding applications. At only 13 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing less fatigue for easier overhead job site applications. The battery-powered impact wrench has cordless convenience and eliminates the need for compressors, generators, cords, and hoses, reducing the cost of ownership. A lack of reliance on cord and hoses allow for greater portability and the ability to complete applications unable to be performed with a corded or pneumatic unit. The REDLINK PLUS™ Intelligence achieves maximum performance and protects the high torque impact gun against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, delivering more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL™ provides greater control over the output speed and power of the high power impact wrench. The ONE-KEY™ capabilities allows for Customization, Tracking, and Management of the impact wrench. ONE-KEY™ technology also provides the ability to set a repeatable torque output for maximum control.

Features

  • POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench
  • Up to 7 lbs. Lighter Weight allowing for less user fatigue
  • Eliminates Compressors and Generators, providing greater portability and lower cost of ownership
  • 4-Mode DRIVE CONTROL™ provides greater control over output speed and power
  • Integrated lanyard loop allows for safer use and easier storage
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • ONE-KEY™ Compatible - Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control
  • Handle rotates 270 degrees and easily adjusts without a tool
  • LED light to illuminate work areas
  • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
  • Compatible with all M18™ batteries

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size1 In.
Impacts per Minute2450
Maximum Torque (ft-lbs)1800
Variable SpeedYes
Maximum RPM1650
Length10.9 Inches
Case IncludedNo
Color / FinishRed/Black
MaterialReinforced Nylon
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)10.64
Weight - Battery Installed (lbs)13.03
Weight - Excluding Battery (lbs)10.64
Number of Batteries Required1
Number of Batteries Included0
Battery Ampere-hour (Ah)8.0
Battery Voltage (V)18
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Included AccessoriesTool Free Adjustable Handle
Item#:
2867-20
Manufacturer Item:
2867-20
Your Price:
799.99
Each

Designed for the professional carpenter and remodeler, the M18 FUEL™ 6-1/2" Plunge Track Saw from Milwaukee® delivers the Power to rip solid hardwoods, over 90% dust collection efficiency while providing the portability and precision users demand from a plunge saw. The POWERSTATE™ Brushless motor provides 6,300 RPM for finish quality and clean cuts. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 battery delivers more cuts per charge and great durability than the competition. The saw features a variable speed dial allowing for setting the speed of your application. The smooth, pivoting plunge motion allows for precision plunge cuts with an accurate depth of cut.

Features

  • POWERSTATE™ brushless motor provides the power and speed to cleanly cut through tough materials
  • Vac port and dust bag for less mess and time spent cleaning up
  • Quick locking blade change system for easy blade changes
  • Smooth plunging action for easy plunge cuts
  • Variable speed dial for setting blade RPM to your application
  • Adjustable cam system to allows user to dial in track to rail fitment for laser straight cuts
  • Riving knife keeps materials from pinching on blade and reduces kickback
  • Easy slide depth scale allows for quick and accurate adjustments
  • Onboard Allen wrench storage for easy blade changes
  • Bevel stops at 22.5, 45 and 48 Degrees
  • Micro adjust depth knob for perfect depth setting
  • Compatible with 1-7/8" Vac hoses

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Saw DriveSidewinder Geared
Saw Blade Diameter (in)6 1/2 in
Blade LocationRight
Maximum RPM - No Load6500
Housing MaterialGlass Filled Nylon, Magnesium
Shoe MaterialCast Magnesium
Color / FinishBlack, Gray, Red
Net Tool Weight (lbs)9.13
Depth AdjustmentYes
Maximum Cut Depth @ 45° (in)1.5625
Maximum Cut Depth @ 90° (in)2.25
Maximum Cut Depth @ 45° When On Track (In)1.5625
Maximum Cut Depth @ 90° When On Track (In)2.25
Length14.3 Inches
Width8.7 Inches
Height10.8 Inches
Bevel Capacity (°)48
Bevel StopYes
Bevel Presets0°, 22.5° & 45°
Arbor Size (in)0.787
Variable SpeedYes
Plunge-Cut CapableYes
Riving KnifePermanently Attached
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)18
Battery SizeBattery Packs
Charger IncludedNo
Tool-Less Blade ChangingNo
Blade Wrench IncludedYes - Stored on Tool
Dust PortYes
Dust Port Outside Diameter (in)1.875
Guide(s)31 in, 55 in, 106 in (not included)
Main Handle TypePistol Grip
Blades Included1
Blade TypeGeneral Purpose
Blade MaterialCobalt Infused Tungsten Carbide
Product Storage IncludedNo Case Included
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2831-20
Manufacturer Item:
2831-20
Your Price:
399.99
Each

The M12 FUEL™ 1/4 in. Hex impact driver once again raises the bar for 12 V performance with best in class driving speed, power, and size. By focusing on productivity, this impact driver gets the job done faster by being over 20% faster in application speed vs. the competition. This tool outputs over 1,300 in. lbs. Of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in. in length allows for unmatched access in tight spaces. The POWERSTATE brushless motor delivers up to 0-3, 300 RPM with constant power output to drive screws faster. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12 REDLITHIUM compact batteries or extended capacity batteries which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode drive control provides greater control over output speed and power for greater versatility by delivering 0-1, 300 RPM in mode 1, 0-2, 400 RPM in mode 2 and 0-3, 300 RPM in mode 3. Mode 4 is self-tapping screw mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

Features

  • POWERSTATE brushless motor delivers 1300 in. lbs. of fastening torque for faster driving speeds
  • REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating
  • REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
  • 4-mode drive control provides greater control over output speed and power

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Drive Size1/4 in Hex
Impacts per Minute4000.0
Maximum Torque (in-lbs)1300.0
Variable SpeedYes
Maximum RPM - No Load3300
Length5.1 Inches
Color / FinishRed/Black
Housing MaterialGlass-filled Nylon
ReverseYes
Case IncludedYes
Net Tool Weight (lbs)1.76
Number of Batteries Included2
Number of Batteries Required1
Battery CompositionLithium-Ion (Li-ion)
Battery Ampere-hour (Ah)2.0
Battery Voltage (V)12
Charger IncludedYes
Battery Charger Input Voltage (V)120.0
CSA CertifiedNo
ETL ListedYes
UL ListedYes
Included AccessoriesBelt Clip
Item#:
2553-22
Manufacturer Item:
2553-22
Your Price:
159.99
Each

Powered by M18™ batteries, the Milwaukee® 2361 - 20 M18™ LED flood light provides best in class light output, functionality and durability. Using 8 high quality LEDS, the flood light provides 1,100 lm and up to 1,300 lux. A compact and lightweight, roll cage design and replaceable, impact resistant lens ensure the 2361-20 can stand up to the toughest working conditions. The octagonal shape allows the light to be used at multiple angles while the multiple hanging feature provide hands free use. The Milwaukee® M18™ LED flood light carries a limited lifetime LED warranty.

Features

  • Up to 30% brighter than a 250 halogen light
  • Up to 8 hours of run-time
  • Limited lifetime LED warranty
  • Multiple hanging features - EMT hanger, key hole hanger, cross bar hanger, handle hanger
  • Innovative roll cage design

Specifications

Work Light TypePortable
Bulb TypeLED
Color / FinishRed/Black
MaterialPlastic/Rubber
Lumens1100
Light ColorTransparent, Bright
Batteries IncludedNo
Battery Type18V Lithium Ion
Battery Charger IncludedNo
Battery Recharge Time (hrs)1.0
Voltage (V)18.0
Length8.75 Inches
Width6.25 Inches
Height6.25 Inches
Magnetic MountNo
Case IncludedNo
ANSI Safety ListingYes
Additional ContentsNone
Item#:
2361-20
Manufacturer Item:
2361-20
Your Price:
91.99
Each

The M12 FUEL™ 1/2" Right Angle Impact Wrench w/ Friction Ring is the industry's most powerful right angle impact wrench. With up to 220 ft-lbs. of nut-busting torque, removing stubborn bolts and fasteners are no longer an issue. Along with power, the tool offers users maximum access, and ultimate control for to reach applications. With a head profile of only 2.8", this tool easily fits into tight spaces, making users more productive, while decreases their need for socket extensions often used with pistol-grip impact tools. 4-Mode Drive Control will allow unmatched control in various fastening and bolt removal applications. Modes 1-3 provide RPM and IPM adjustments for precision control. In Mode 4, this tool is equiped with Auto Shut-off Mode in forward and Bolt Removal Mode in reverse. Auto Shut-off Mode will prevent over-tightening of bolts by applying no more than 15 ft-lbs of torque. Bolt removal mode will provide more control as RPMs drastically slow down once the bolt is loosened. The REDLINK PLUS™ Intelligence ensures users achieve maximum performance and protects the tool against overloads, over-heating, and over-discharge. The M12™ REDLITHIUM™ Battery Packs are compatible with all M12™ tools, delivering more work per charge and more work over the life of the pack.

Features

  • POWERSTATE™ Brushless Motor delivers up to 220 ft-lbs. of nut-busting torque, making it the most powerful cordless right angle impact wrench on the market
  • More Access in Tight Spaces
  • 4-Mode Drive Control
  • A 2.8" head profile design allows for more access in tight spaces
  • Auto shut-off mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque.
  • Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
  • The long body profile of 14.17" allows for more access in hard to reach spaces
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • LED light to illuminate the work area
  • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size1/2 In.
Impacts per Minute3600
Maximum Torque (ft-lbs)220
Variable SpeedYes
Maximum RPM3000
Length14.17 Inches
Case IncludedYes
Color / FinishRed/Black
MaterialAluminum
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)3.25
Weight - Battery Installed (lbs)3.25
Weight - Excluding Battery (lbs)2.85
Number of Batteries Required1
Number of Batteries Included2
Battery Ampere-hour (Ah)2.0
Battery Voltage (V)12
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedYes
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2565-22
Manufacturer Item:
2565-22
Your Price:
334.99
Each

The M12 FUEL™ 1/2" Right Angle Impact Wrench w/ Friction Ring is the industry's most powerful right angle impact wrench. With up to 220 ft-lbs. of nut-busting torque, removing stubborn bolts and fasteners are no longer an issue. Along with power, the tool offers users maximum access, and ultimate control for hard to reach applications. With a head profile of only 2.8", this tool easily fits into tight spaces, making users more productive, while decreases their need for socket extensions often used with pistol-grip impact tools. 4-Mode Drive Control will allow unmatched control in various fastening and bolt removal applications. Modes 1-3 provide RPM and IPM adjustments for precision control. . In Mode 4, this tool is equiped with Auto Shut-off Mode in forward and Bolt Removal Mode in reverse. Auto Shut-off Mode will prevent over-tightening of bolts by applying no more than 15 ft-lbs of torque. Bolt removal mode will provide more control as RPMs drastically slow down once the bolt is loosened. The REDLINK PLUS™ Intelligence ensures users achieve maximum performance and protects the tool against overloads, over-heating, and over-discharge. The M12™ REDLITHIUM™ Battery Packs are compatible with all M12™ tools, delivering more work per charge and more work over the life of the pack.

Features

  • POWERSTATE™ Brushless Motor delivers up to 220 ft-lbs. of nut-busting torque, making it the most powerful cordless right angle impact wrench on the market
  • More Access in Tight Spaces
  • 4-Mode Drive Control
  • A 2.8" head profile design allows for more access in tight spaces
  • Auto shut-off mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque.
  • Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
  • The long body profile of 14.17" allows for more access in hard to reach spaces
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • LED light to illuminate the work area
  • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size1/2 In.
Impacts per Minute3600
Maximum Torque (ft-lbs)220
Variable SpeedYes
Maximum RPM3000
Length13.28 Inches
Case IncludedNo
Color / FinishRed/Black
MaterialAluminum
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)2.85
Weight - Battery Installed (lbs)3.25
Weight - Excluding Battery (lbs)2.85
Number of Batteries Required1
Number of Batteries Included0
Battery Voltage (V)12
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2565-20
Manufacturer Item:
2565-20
Your Price:
198.99
Each

The MILWAUKEE® 325L Focusing Flashlight delivers higher light output and is a Brighter, More Durable Everyday Flashlight. The LED light emits 325 lumens of TRUEVIEW™ High Definition Output and features a spot-to-flood sliding beam focus to provide up to 115 meters (377 feet) of beam distance for maximum visibility. The compact flashlight is waterproof, dustproof, chemical resistant and survives repeated drops from 4 meters (12 ft.) meeting the daily demands of any jobsite. Adjustable brightness allows for optimized runtime for specific jobs by choosing between the high and low output modes for up to 18 hours of runtime. The multi-beam flashlight's removable metal clip attaches to chest or pant pockets for quick storage and access. The 325 Lumen Focusing Flashlight's LEDs are covered by a limited lifetime warranty.

Features

  • 115m (377 ft) beam distance for long range tracing and searching
  • 4m (12 ft) drop rated and corrosion resistant body and lens
  • Hard anodized, structural grade aluminum body
  • Limited lifetime warranty on Light and LEDs
  • On/off and momentary-on button switch for quick use
  • Powered by (3) AAA Batteries (Included)
  • Removable metal pocket clip
  • Two light output modes - High mode - 325 lumens- 5 hours; Low mode - 25 lumens- 18 hours

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Light Units of MeasurementLumens
Light Units of Measurement Quantity325
Water ResistantYes
Number of Batteries Required3
Number of Batteries Included3
Battery CompositionAlkaline
Battery SizeAAA
Battery Ampere-hour (Ah)0
Case IncludedNo
Charger IncludedNo
Bulb TypeLED
Spare Bulbs IncludedNo
Lanyard IncludedNo
HolsterNo
Color / FinishBlack
Flashlight Length (in)4.75
Flashlight Width (in)1.125
MaterialAluminum
Belt ClipYes
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2107-MILW
Manufacturer Item:
2107
Your Price:
34.99
Each

The DCP580B features a brushless motor for maximum efficiency that helps to maintain speed under load. The brushless planer features a 3-1/4-inch width capacity and ability to adjust depth at 1/256-inch adjustments with a rebate capacity of 5/64-inch The planer weighs 6.8 lbs. and operates on the DEWALT 20V MAX battery system. Lightweight and cordless, the hand planer for woodworking can be easily transported around the jobsite without the hassle of a cord. Battery, charger and dust bag sold separately.

Features

  • Brushless Motor provides power and runtime
  • 30,000 cuts per minute achieve a fast removal rate
  • 5/64 in. (2 mm.) maximum depth of cut
  • Calibrated depth adjustment knob to 1/256 in. (0.01 mm. approximately)
  • Precision-machined front and back aluminum shoes ensure parallelism of cut
  • Kickstand allows user to rest the planer on work surface without gouging the material
  • Precision machined groove in front shoe allows for edge chamfering
  • Poly-V drive belt provides increased belt durability
  • Ergonomically designed handle provides greater comfort and less user fatigue
  • Replacement blades DW6654 Part Number: N447366

Specifications

Height8.900 in
Length13.700 in
Width7.850 in
Weight7.800 lbs
Power SourceBattery
Cordless Vs. CordedCordless
Motor TypeBrushless
Voltage20 V V
Battery IncludedNo
Battery Type20V MAX* Lithium Ion
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Charger IncludedNo
Amperage0.0
Battery RequiredYes
Number Of Batteries Required1
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Prop 65 Generic WarningYes
Warranty3LW1YS90D
Certifications Or ListingsUL Listed
California Prop 65 Warning Labelhttp://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
Claims NeededYes
File/Certification Number (Lowes Required)TBD/Transition
Bare ToolYes
Blade Qty2
Case TypeN/A (no case)
Cuts Per Minute32000
Cutting Width3.25 In
Depth0.078 In
Dust Solution CompatibleYes
Fence IncludedYes
Flow Rating1 Gpm
Housing MaterialPlastic
Individual Vs. Set (Syndigo)INDIVIDUAL
Maximum Pressure Rating550 Psi
Maximum Speed15000 RPM Rpm
Power Input1400 W
Shoe Length3.25 In
Uncertainty K1 (Vibration)2
Item#:
DCP580B
Manufacturer Item:
DCP580B
Your Price:
203.89
Each

Most versatile light on site - customize, track, manage the new M18™ RADIUS™ LED compact site light with ONE-KEY™ is the world's first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lm of TRUEVIEW™ high definition output, the M18™ RADIUS™ LED compact site light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lm for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.

Features

  • Set light remotely from 50 ft
  • Optimize brightness and runtime
  • Program automatic schedule
  • Lighting for task, area, and overhead
  • 4,400 lm for maximum coverage
  • High impact polycarbonate lens
  • AC in and out - string up to 10 together
  • Protected AC plugs
  • Self-centering hang hook
  • Reinforced hang hole
  • 180 and 360 electronic light control
  • Low battery indicator
  • Security cable
  • A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions
  • M18 REDLITHIUM high demand 9.0 battery pack delivers up to 5x more run-time, 35% more power, and runs 60% cooler than standard 18-Volt lithium-ion batteries

Specifications

Work Light TypePortable
Bulb TypeLED
Color / FinishRed/Black
MaterialPlastic
Lumens4400
Light ColorNatural
Batteries IncludedNo
Battery Type18V Lithium Ion
Battery Charger IncludedNo
Voltage (V)18.0
Length10.5 Inches
Width9.25 Inches
Height10.5 Inches
Magnetic MountNo
ANSI Safety ListingNo
Additional ContentsSecurity Cable
Item#:
2146-20
Manufacturer Item:
2146-20
Your Price:
348.99
Each

Features

  • Dual LEDs help illuminate the work surface
  • Variable-speed dial allows the user to match speed of of the router to the application
  • Depth adjustment ring allows for fast and easy height adjustments
  • Soft start motor with full-time electronic feedback allows the motor to maintain speed during cuts
  • Electronic brake slows the motor down faster after the unit is shut off

Specifications

Height5.750 in
Length8.379 in
Width6.100 in
Weight4.150 lbs
Power SourceElectric
Cordless Vs. CordedCordless
Motor TypeBrushless
Voltage20 V V
Battery IncludedNo
Battery Type20V MAX* Lithium Ion
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Charger IncludedNo
Battery RequiredYes
Number Of Batteries Required1
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Prop 65 Generic WarningYes
Warranty3LW1YS90D
Certifications Or ListingsCSA safety listing | UL Listed
California Prop 65 Warning Labelhttp://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
Claims NeededYes
File/Certification Number (Lowes Required)TBD/Transition
Adjustable DepthYes
Bare ToolYes
Base TypeFixed
BrakeYes
Case TypeNo Case Included
Collet Size0.25
Depth Capacity1.5 In
Dust CollectionNo
Electronic Speed ControlYes
EngineBrushless
Fence IncludedNo
Housing MaterialPlastic
Individual Vs. Set (Syndigo)INDIVIDUAL
Led LightYes
Lock-On SwitchNo
Maximum Speed25500 RPM Rpm
Plunge Lock ControlNo
Spindle LockYes
Variable SpeedYes
Item#:
DCW600B
Manufacturer Item:
DCW600B
Your Price:
215.99
Each

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

Features

  • 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
  • Brushless motor maximizes runtime and durability
  • Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
  • Tool-free selectable trigger for sequential or contact actuation modes
  • Tool-free depth adjustment for precise countersinking of nails
  • Tool-free jam release to quickly and easily clear nail jams
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
  • Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
  • Adjustable belt hook for left or right attachment depending on user preference
  • Inline magazine provides easy use in multiple orientations and in tight spaces

Specifications

Height5.870 in
Length18.380 in
Width13.562 in
Weight10.500 lbs
Power SourceBattery
Cordless Vs. CordedCordless
Motor TypeBrushless
Voltage20 V V
Battery IncludedYes
Battery Type20V MAX* Lithium Ion
Battery Qty1
Battery Weight0.8
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Battery Amp Hours2 Ah Ah
Watt Hours40
Net Lit-Ion Y/NYes
Charger IncludedYes
Charger TypeWall Mountable Charging Base
Battery RequiredYes
Charge Time60
Number Of Batteries Required1
RechargeableYes
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
HazmatLi-IonBatt <101 WH
Prop 65 Generic WarningYes
Warranty3LW1YS90D
Claims NeededYes
Hazmat CodeA1
Adjustable DepthYes (Tools Not Required)
Case TypeN/A (no case)
EngineBrushless
Fastener FormatStrip
Fastener Length2.5
Firing ModeFull Sequential
Gauge15
Housing MaterialPlastic
Individual Vs. Set (Syndigo)SET
Integrated Work LightYes
Loading TypeCoil
Maximum Fastener Size2-1/2 in
Maximum Length2.5 In
Minimum Fastener Size1-1/4 in
Minimum Length1.25 In
Multi-PurposeSingle Purpose
Nail Gauge15 gauge
Nail Gun Angle34 degree
Nails Per Charge1200
Range15 gauge
Item#:
DCN650D1
Manufacturer Item:
DCN650D1
Your Price:
433.69
Each

Designed for the professional carpenter, remodeler, and general contractor; The MILWAUKEE® M18 Orbital 1/4 Sheet Sander is optimized for performance and productivity on the jobsite. The Milwaukee M18 Orbital 1/4 Sheet Sander offers unmatched power at 13K Max OPM and class-leading dust collection to replace your corded unit. The low vibration and ergonomics of the tool deliver enhanced comfort and user control to reduce fatigue. The two-step clamp system allows for quick and easy sandpaper changes. The variable speed dial offers adjustment from 13K to 11K OPM for precise removal throughout a wide variety of materials. The dust collection system paired with Milwaukee Tool's durable dust bag or universal hose adapter reduces clean-up time and provides a cleaner work environment.

Features

  • Low vibration levels deliver enhanced comfort and user control to reduce fatigue
  • Up to 95% dust collected for a cleaner work environment with less clean up time
  • Variable Speed Dial offers adjustment from 13K to 11K OPM for greater control of the material removal rate
  • Two-step clamp system allows for quick and easy sandpaper changes
  • Orbit diameter of 1.6mm delivers strong balance of removal rate and surface finish
  • Durable cotton dust bag delivers greater resistance against tears and leaks
  • Included universal hose adapter provides compatibility with a wide range of vacuum sizes
  • Part of the Milwaukee M18™ System, featuring over 200+ tools
  • REDLINK Technology ensures maximum performance and protects from overloads, heating, and over-discharge

Specifications

Powered Tool Power SourceElectric - Cordless
Sander StyleSheet
Cordless / CordedCordless
Color / FinishRed, Black
Length5.2 Inches
Width5.6 Inches
Height5.9 Inches
Speed (Surface Feet / Orbits Per Minute)12000
Single Or Multi-PlaneSingle Plane
Net Tool Weight (lbs)2.5
Variable SpeedYes
Dust CollectionYes
Electronic Speed ControlYes
Lock-on SwitchYes
Pad Size4.5 in x 5.5 in
Switch TypeOn and Off
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)18
Charger IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2649-20
Manufacturer Item:
2649-20
Your Price:
112.99
Each

The MILWAUKEE® M18 FUEL™ Braking Die Grinder, Slide Switch, allows users to step up from their corded solutions by delivering 11A Corded Power, and the ability to remove up to 12" of weld bead on (1) M18™ 5.0ah XC Battery. Equipped with RAPIDSTOP™ technology that Provides Braking in under 2 seconds, the M18 FUEL™ Braking Die Grinder, Slide Switch, Provides Enhanced Safety while maximizing work done. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tightest of spaces. This cordless braking die grinder tool delivers up to 2" Accessory Compatibility for material removal and surface prep applications. Milwaukee Die Grinder features REDLINK PLUS™ Intelligence, the most advanced system of Cordless Power tool electronics for maximum performance and longest tool life.

Features

  • Milwaukee POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
  • REDLINK PLUS™ Intelligence - Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
  • M18™ REDLITHIUM ™ XC5.0 battery pack (not included) delivers up to 12" of weld bead removed
  • Generating 11A Corded Power, The M18 FUEL™ Braking Die Grinder gives users the power they need to replace Corded Solutions
  • RAPIDSTOP™ Brake stops cutting and sanding accessories in under 2 seconds.
  • Spindle Lock, One Wrench Accessory Change
  • Slide Switch, Designed to Reduce User Fatigue
  • Fits all 1/4" Shank Accessories
  • 27,000 RPM Brushless Motor is designed to deliver corded performance with 2" Accessory Sanding and Cutting Wheel Compatibility
  • Compatible with all M18™ Batteries

Specifications

Powered Tool Power SourceElectric - Cordless
Grinder TypeDie
Cordless / CordedCordless
Maximum RPM27000
Variable SpeedNo
Arbor Size (in)0.25
Length15.50 Inches
Net Tool Weight (lbs)2.89
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)18
Charger IncludedNo
Housing MaterialGlass-Filled Nylon
Color / FinishBlack, Red
Product Storage IncludedNo Case Included
Electronic Speed ControlNo
Grinder Switch TypeSliding Switch
Grinding Wheel IncludedNo
Handle TypeInline
Overload ProtectionYes
Side HandleNo
Spindle LockYes
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2939-20
Manufacturer Item:
2939-20
Your Price:
224.99
Each

The MILWAUKEE® M12 FUEL™ 3/8 in. High Speed Ratchet is part of the latest addition to Milwaukee's best-in-class lineup of ratchets. This cordless ratchet provides the fastest speed while installing and removing fasteners. The most compact head size in its class offers more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability expected from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing professionals to be more productive than any other battery-powered ratchet.

Features

  • Delivers up to 450 RPM for best-in-class productivity
  • Up to 35 ft-lbs. of max torque
  • 0.75" head profile allows for best-in-class access in tight spaces
  • Steel yoke housing for greater durability
  • Ratchet can be used manually without engaging the motor
  • LED light to illuminate work areas
  • On-board battery fuel gauge displays remaining run time
  • Extended paddle switch for multiple grip options
  • Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments
  • POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
  • REDLINK PLUS™ Intelligence prevents damage to the tool and battery due to overloading or overheating
  • REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
  • Part of the M12™ system, featuring 100+ tools

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Drive Size3/8 in
Maximum Torque (in-lbs)420
Maximum RPM450
Length10.3 Inches
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)12
Charger IncludedNo
Net Tool Weight (lbs)1.7
Weight - Battery Installed (lbs)2.1
Weight - Excluding Battery (lbs)1.7
Case IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2567-20
Manufacturer Item:
2567-20
Your Price:
179.99
Each

The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

Features

  • 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
  • Brushless motor maximizes runtime and durability
  • Tool-free selectable trigger for sequential or contact actuation modes
  • Tool-free depth adjustment for precise countersinking of nails
  • Tool-free jam release to quickly and easily clear nail jams
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
  • Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
  • Adjustable belt hook for left or right attachment depending on user preference
  • Inline magazine provides easy use in multiple orientations and in tight spaces
  • Compatible with all DEWALT 20V MAX batteries

Specifications

Height5.850 in
Length18.187 in
Width12.680 in
Weight10.030 lbs
Power SourceBattery
Cordless Vs. CordedCordless
Motor TypeBrushless
Voltage20 V V
Battery IncludedYes
Battery Type20V MAX* Lithium Ion
Battery Qty1
Battery Weight0.8
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Battery Amp Hours2 Ah Ah
Watt Hours40
Net Lit-Ion Y/NYes
Charger IncludedYes
Charger TypeWall Mountable Charging Base
Battery RequiredYes
Charge Time120
Number Of Batteries Required1
RechargeableYes
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Prop 65 Generic WarningYes
Warranty3LW1YS90D
Certifications Or ListingsANSI Safety Listing | CSA Certified | UL Listed
Claims NeededYes
Hazmat CodeA1
Adjustable DepthYes (Tools Not Required)
Case TypeBag
EngineBrushless
Fastener FormatStrip
Fastener Length2.5
Firing ModeFull Sequential
Gauge16
Housing MaterialPlastic
Individual Vs. Set (Syndigo)INDIVIDUAL
Integrated Work LightYes
Loading TypeStrip
Magazine Angle20.0
Maximum Fastener Size2-1/2 in
Maximum Length2.5 In
Minimum Fastener Size1-1/4 in
Minimum Length1.25 In
Multi-PurposeSingle Purpose
Nail Gauge16 gauge
Nail Gun Angle20 degree
Nailer FeaturesNo Features
Nails Per Charge800
Range16 Gauge
Item#:
DCN660D1
Manufacturer Item:
DCN660D1
Your Price:
433.99
Each

The M18™ compact heat gun performs applications quickly by reaching operational temperature in less than 7 seconds. As the most compact cordless heat gun in the market, it can go places where corded heat guns can't. The guarded nozzle and ladder hook prevent the tool from coming in contact with unprotected surfaces. Powered by REDLITHIUM™ battery technology, it is able to heat over 40 connections on a single XC5.0 battery, anywhere, anytime without the hassle of cords. The M18™ compact heat gun features REDLINK Plus™ intelligence with a temperature management system to provide maximum life.

Features

  • 30% Faster heat up than corded
  • Most compact, stand & hang
  • One charge, 40+ connections
  • High performance heating coil - reach operational temperature in 7 seconds
  • REDLINK™ Intelligence - temperature management system provides maximum life
  • Compatible with all M18™ REDLITHIUM™ battery packs
  • Most compact cordless heat gun - 6.4 in. long
  • Guarded nozzle - prevents contact with unprotected surfaces
  • Ladder hook - easily hang between applications
  • LED light

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
BTU Heat Rating914.0
Maximum Temperature (°F)875
Case IncludedNo
Color / FinishRed/Black
Housing MaterialGlass Filled Nylon
Length6.39 Inches
Replaceable Heating ElementNo
Net Tool Weight (lbs)1.7
Number of Batteries Required1
Number of Batteries Included0
Battery Voltage (V)18
Charger IncludedNo
CSA CertifiedYes
ETL ListedYes
UL ListedYes
Item#:
2688-20
Manufacturer Item:
2688-20
Your Price:
135.19
Each

More portable. All-day operation - the M12® ROCKET™ dual power tower light has the lightest weight in its class and a 45% smaller footprint than M18® ROCKET™ tower lights that allows it to be easily carried and setup in the most confined spaces. The 2132-20 extends 5 Ft. 8 in. to provide 1,400 lm of TRUEVIEW™ high definition output on high mode and 700 lm on low mode. When powered by an M12® REDLITHIUM™ XC6.0 battery pack, it runs up to 10 hours on a single charge or can be plugged into an extension cord for all-day operation. After deployment, the 2132-20 is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any jobsite.

Features

  • 1,400 lm of TRUEVIEW™ high definition output
  • Dual power - powered by M12® battery or extension cord
  • Collapses to 2 Ft. 7 in., extends to 5 Ft. 8 in.
  • Light head rotates 210 degrees and pivots 270 degrees for light in any direction
  • 45% Smaller footprint than M18® ROCKET™ tower lights
  • Collapses down to 31 in. with three side handles for easy transportation and storage
  • Impact resistant, reinforced legs
  • Protective guard secures head during transport and storage
  • Low battery indicator flashes when battery pack is low

Specifications

Work Light TypeStand
Color / FinishRed/Black
MaterialPlastic
Bulb TypeLED
Lumens1400
Light ColorWhite
Batteries IncludedNo
Battery Type12V Lithium Ion
Battery Charger IncludedNo
Battery Recharge Time (hrs)0
Voltage (V)12
Length5.75 Inches
Width5.5 Inches
Height30.5 Inches
Magnetic MountNo
Case IncludedNo
ANSI Safety ListingNo
Additional ContentsNone
Item#:
2132-20
Manufacturer Item:
2132-20
Your Price:
152.99
Each

The M18™ RADIUS™ compact site light w/ flood mode offers the user two lights in one for area lighting and tasking lighting. With 2,200 lm of output in area mode for illuminating large work areas and 1000 lm of flood lighting for task situations there is no application this light can't handle. This light offers up to 18 hours of runtime with an M18™ XC 5.0 battery and has the option to be plugged in using its AC inlet for extended runtime. Its compact size allows users to take this site light on and off the jobsite effortlessly and its 4-1/4 in. metal hanging hook allow users to hang this light from above for overhead lighting situations. The M18™ RADIUS™ compact site light w/ flood mode is equipped with a high impact polycarbonate lens to withstand harsh jobsite abuse. Its high quality LEDS never need to be replaced and are backed by a Limited Lifetime Warranty.

Features

  • Dual function - 360° area lighting, 90° flood lighting
  • 2,200 lumens of task, area, and overhead lighting
  • High impact polycarbonate lens
  • 1000 lumens of task lighting
  • AC inlet for all day runtime
  • 4-1/4 in. hanging hook for overhead lighting
  • 3 Area and task output modes for optimal brightness and runtime
  • High mode - 2200 lm for up to 4 hours with M18 XC 5.0 battery
  • Medium mode - 1100 lm for up to 8 hours with M18 XC 5.0 battery
  • Low mode - 250 lm for up to 24 hours with M18 XC 5.0 battery

Specifications

Work Light TypePortable
Color / FinishRed/Black
MaterialPlastic, Polycarbonate Lens
Bulb TypeLED
Lumens2200
Light ColorNatural
Batteries IncludedNo
Battery Type18V Lithium Ion
Battery Charger IncludedNo
Voltage (V)18.0
Length8.0 Inches
Width7.88 Inches
Height10.38 Inches
Magnetic MountNo
Case IncludedNo
ANSI Safety ListingYes
Additional ContentsSite light with flood mode
Item#:
2144-20
Manufacturer Item:
2144-20
Your Price:
170.00
Each

Features

  • 3.75 in. head length - great for working in tight spaces
  • 3/8 in. single sleeve ratcheting chuck - maximum versatility and grip
  • Electronic clutch - 11 settings + drill mode for complete control in fastening applications
  • Extended multi-position handle - provides convenience and versatility
  • Built in LED's - illuminates work surface and indicates clutch out

Specifications

Powered Tool Power SourceElectric - Cordless
Drill TypeRight Angle Drill
Cordless / CordedCordless
Chuck Size3/8 in
Chuck DesignKeyless
Color / FinishRed
Drill / Driver Maximum RPM1500
Maximum Torque (ft-lbs)100.0
Variable SpeedYes
ReverseYes
Side HandleNo
Length11.0 Inches
Net Tool Weight (lbs)2.75
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Ampere-hour (Ah)0.0
Battery Voltage (V)18
Charger IncludedNo
Battery Recharge Time (hrs)1.0
Case IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedNo
Item#:
2615-20
Manufacturer Item:
2615-20
Your Price:
138.99
Each

The Milwaukee® M18™ FUEL™ 9 in. cut-off saw w/ ONE-KEY™ is an extremely versatile solution for cutting a large variety of materials. The M18 fuel 9 in. cut-off saw runs on Milwaukee's M18 REDLITHIUM batteries instead of using gas like most traditional cut-off saws . This saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being up to 50% lighter than gas saws that dominate the market today. By utilizing Milwaukee's M18 REDLITHIUM high output HD12.0 battery, this saw delivers no gas headaches. It produces no fumes so it can be used indoors, it starts up instantly, it eliminates the need to mix gas and oil, and there is no gas engine maintenance. The battery will also work on any of Milwaukee's other 200+ M18 solutions. The M18™ FUEL™ 9 in. cut-off saw also has ONE-KEY™ integrated so users can wirelessly connect the tool with their smart phone to track and manage the tool.

Features

  • Power to cut reinforced concrete
  • Up to 50% lighter than gas
  • No gas headaches
  • Cut depth - 3.4 in.
  • Blade diameter - 9 in.
  • RPM - 6,600
  • Blade Arbor - 7/8 in.
  • Onboard water connection - quick connect
  • Load indicator light
  • Weight (Bare tool) - 10.6 lbs
  • RAPIDSTOP™ Blade brake
  • Onboard tool storage - wrench and hex key
  • ONE-KEY™ Tool tracking and management
  • Fully adjustable guard
  • Fully cordless OSHA compliant concrete cutting solution with M18™ SWITCH TANK™ water supply (2820-21WS)

Specifications

Powered Tool Power SourceElectric - Cordless
Arbor Size (in)0.875
Case IncludedNo
Color / FinishRed/Black
Depth Of Cut Range0-3.4 in.
Length26.1 Inches
Width7.6 Inches
Battery TypeLithium-Ion
Voltage18 Volts
Maximum RPM6600
Spindle LockYes
Net Tool Weight (lbs)10.6
Wheel Diameter (in)9
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Recommended Safety EquipmentSafety Glasses, Work Gloves
Item#:
2786-22HD
Manufacturer Item:
2786-22HD
Your Price:
898.99
Each

The M12™ cordless lithium-ion palm nailer provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. The compact size takes this tool places unreachable by a tradition nail gun, while the powerful impacting mechanism handles the most difficult of tasks. The M12™ cordless lithium-ion palm nailer also features an on board fuel gauge, LED work light, and a convenient hand strap to ensure the highest level of safety and productivity for the user.

Features

  • 6D -16D magnetic collet - industrial magnetic collet securely holds framing nails for one-handed use
  • All metal gear housing - handles tough jobsite conditions
  • Palm style ergonomics - delivers superior comfort and control
  • Powerful mechanism - delivers 2.2 ft/lbs of blow energy
  • LED light - illuminates work surface
  • Compatibility - works with both M12™ Red Lithium™ batteries and 25+ M12™tools

Specifications

Powered Tool Power SourceElectric - Cordless
Nailer / Stapler DesignNailer
Cordless / CordedCordless
Fastener Gauge Range16D Nail, 10D Strap Nail, and 40D 5" Pole Barn Spike
Fastener Length Range5
Color / FinishRed / Black
Housing MaterialPolycarbonate
Length6.5 Inches
Height7.5 Inches
Width2.5 Inches
Net Tool Weight (lbs)3.4
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Ampere-hour (Ah)1.4
Battery Voltage (V)12
Charger IncludedNo
Fasteners Used6D - 16D
Fastener TypeFraming
Fastener FormatStrip
Depth ControlNo
Case IncludedNo
CSA CertifiedYes
ETL ListedYes
UL ListedYes
Item#:
2458-20
Manufacturer Item:
2458-20
Your Price:
147.99
Each

The M12™ cordless lithium-ion grease gun develops higher pressure, offers greater productivity, and gives the user more versatility on the jobsite than any other cordless grease gun in the market. With up to 25% more pressure and run-time than the competition, the 2446-21XC delivers over 8,000 PSI max operating pressure for heavy duty applications and dispenses up to seven grease cartridges per battery charge. The M12™ cordless lithium-ion grease gun also features a lightweight, ergonomic handle design for greater user comfort during prolonged use and an on board hose storage and shoulder strap loop for added convenience with less mess.

Features

  • Powerful 12 V motor - delivers over 8,000 PSI max operating pressure
  • Best in class run-time - dispenses up to 7 cartridges per charge
  • Superior handle balance and ergonomics - only 14 in. long and 7.2 lbs
  • Integrated hose storage and LED FUEL gauge - added user convenience and less down time
  • Air bleeder valve - priming mechanism for quick flow
  • M12™ lithium-ion system - compatible with over 20 M12™ lithium-ion tools for greater versatility in the workplace
  • Maximum durability - backed by a 5 year warranty
  • Up to 7 grease cartridges per charge
  • Grease capacity - 14 oz cartridge, 16 oz bulk
  • Three way loading - bulk, cartridge, and suction capable
  • 36 in. high pressure flex hose with spring guard

Specifications

Powered Tool Power SourceElectric - Cordless
Grease Gun Color / FinishRed
Grease Gun Housing MaterialGlass-filled Nylon
Hose Length (in)36
Maximum Pressure Rating (psi)8000
Capacity (oz)20
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)12
Charger IncludedNo
CSA CertifiedYes
ETL ListedYes
UL ListedYes
Case IncludedNo
Item#:
2446-20
Manufacturer Item:
2446-20
Your Price:
118.99
Each

MILWAUKEE, WI  Milwaukee Tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18 FUEL™ HOLE HAWGS® with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ Brushless Motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG® is the fastest in applications when drilling 7/8" ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7lbs. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG is able to drill up to 220 7/8" holes with a ship auger on a single charge.

Features

  • Fastest Rough-Ins
  • Lightest Right Angle Drill
  • Up to 220 7/8" Holes Per Charge
  • All Metal 1/2" Keyed Chuck
  • POWERSTATE™ Brushless Motor provides constant power under heavy load to power through 2-9/16" in. holes
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • M18 REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack delivers over 220 7/8" holes per charge, and has 50% More Power and Runs 50% Cooler vs. REDLITHIUM™ XC
  • LED light to illuminate the work area
  • Compatible with all M18™ batteries
  • Ergonomic Top Handle for maximum comfort

Specifications

Powered Tool Power SourceElectric - Cordless
Drill TypeRight Angle Drill
Cordless / CordedCordless
Chuck Size1/2 in
Chuck DesignKeyed
Color / FinishRed/Back
Drill / Driver Maximum RPM1550
Variable SpeedYes
ReverseYes
Side HandleNo
Length15.6 Inches
Width3.7 Inches
Height6.5 Inches
Net Tool Weight (lbs)7.7
Weight - Battery Installed (lbs)10.0
Weight - Excluding Battery (lbs)7.7
Number of Batteries Required1
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Voltage (V)18
Charger IncludedNo
Case IncludedNo
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2807-20
Manufacturer Item:
2807-20
Your Price:
269.99
Each

The MILWAUKEE® M18™ ROCKET™ Tower Light/Charger is designed to deliver a lighting solution that adapts, performs, and survives to the jobsite. This light tower sets up in seconds to a max height of 7' and collapses to less than 4' for easy transportation and storage. The LED light head can be extended from 4-7' to light overhead work or minimize shadows when casting shine downward. The multidirectional light head allows users to orient the three independently pivoting light heads to cast light in several directions. The integrated AC plug allows the light to be plugged in with a standard extension cord and charges any M18™ REDLITHIUM™ pack or use the USB port to charge devices on site. Delivering 6,000 lumens, it fills up large areas with TRUEVIEW™ High Definition light. For optimized control over the output and run-time, the M18™ ROCKET™ LED Light has three output settings. The LEDs never need to be replaced and are backed by a limited lifetime warranty.

Features

  • IP54 Rated - Water and Dust Resistant
  • 6,000 Lumens of Multidirectional Light
  • 3 Independently Pivoting Light Heads
  • Built in M18 Charger
  • 5 Second setup, 7 Foot Extension
  • Impact Resistant, Reinforced Legs
  • Protective Guard to Secure head and lens during transport and storage
  • 2.1 amp USB Port
  • Ergonomic Carry Rail

Specifications

Work Light TypeStand
Bulb TypeLED
Color / FinishRed/Black
MaterialPlastic
Lumens6000
Light Color4300K
Batteries IncludedNo
Battery Type18V Lithium Ion
Battery Charger IncludedYes
Voltage (V)18.0
Length9.65 Inches
Width10.13 Inches
Height41.25 Inches
Magnetic MountNo
Case IncludedNo
ANSI Safety ListingNo
Additional ContentsNo Additional Contents
Item#:
2136-20
Manufacturer Item:
2136-20
Your Price:
418.99
Each

The DEWALT 20V MAX Cordless Tripod LED Work Light illuminates your workspace in the toughest jobsite conditions. It's built for incredible durability in use, storage, or transport. Eliminate the hazardous heat of halogen. Cutting edge LED technology provides extended runtime and natural white light. Variable brightness settings up to 3000 lumens let you customize illumination for your work area. Compact design with carry handle provides easy portability, and it sets up in seconds. Rotating, pivoting head of LED rechargeable work lights directs light where you need it. This package includes the light only.

Features

  • Natural white led provides accurate color visibility, long life span, and stays cool to the touch
  • Three brightness settings (up to 3000 lumens) to customize work space illumination
  • Telescoping pole extends light head to 7 feet to reduce shadows and glare
  • Latch mechanism on handle to easily extend and collapse legs
  • Tough shroud protects light head and withstands jobsite conditions
  • Over 11 Hours Runtime
  • IP-55 rating for weather and dust resistance

Specifications

Height10.530 in
Length41.350 in
Width10.000 in
Weight20.950 lbs
Power SourceBattery
Cordless Vs. CordedCordless
Voltage20 V V
Battery IncludedNo
Battery Type20V MAX* Lithium Ion
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Charger IncludedNo
Battery RequiredYes
Number Of Batteries Required1
RechargeableYes
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** With DCB206 battery, low brightness setting
Prop 65 Generic WarningNo
Warranty3LW1YS90D
Claims NeededYes
Bare ToolYes
Bulb TypeLED
Individual Vs. Set (Syndigo)SET
Light Units Of Measure5000 Lumens
Number Of Light Bulbs1
Water ResistantNo
Work Light TypeStand Up Work Light
Item#:
DCL079B
Manufacturer Item:
DCL079B
Your Price:
242.99
Each

This is lightweight reciprocating saw is only 3.13 lbs. and 37% lighter than the DCS367 Compact Reciprocating Saw (Tool Only). This saws LED helps illuminate dark workspaces and provides up to 2,800 spam to help get the job done. The pivoting shoe and variable speed trigger provide added control for a variety of jobs. Includes one belt hook and two blades. Battery and charger sold separately.

Features

  • Compact at only 12.5 in. front to back
  • 37% Lighter than the DCS367 Reciprocating Saw (tool only)
  • Brushless motor for increased performance
  • LED to help illuminate dark work spaces
  • Tool-free blade release allows for quick and easy blade changes
  • Variable-speed trigger provides user with improved speed control
  • Pivoting shoe provides more points of contact than a fixed shoe

Specifications

Height3.437 IN
Length13.687 IN
Width5.875 IN
Weight3.700 LB
BLADE STROKE LENGTH0.625 in
LENGTH OF STROKE.625 in
Item#:
DCS369B
Manufacturer Item:
DCS369B
Your Price:
159.99
Each

The 2864 M18™ FUEL™ w/ONE-KEY™ high torque 3/4 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATE™ brushless motor delivers up to 1,200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry's most compact cordless high torque impact wrench at 8.59 in. in length, this tool allows for more access in tight spaces. REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry's first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool's performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEY™, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool's memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.

Features

  • POWERSTATE™ brushless motor delivers up to 1200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque
  • REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating
  • REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
  • Most compact cordless high torque impact wrench in its class at 8.59 in. in length
  • ONE-KEY™ Compatible - customize, track and manage tools performance and location
  • M18 fuel with ONE-KEY™ Technology provides the most repeatable impact wrench in the industry
  • Easily toggle up to four custom performance profiles that can be saved to the memory of the tool
  • Features a friction ring with thru-hole design to ensure quick and easy socket changes
  • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
  • LED light to illuminate the work area
  • Part of the M18 system, featuring over 150+ tools

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size3/4 In.
Impacts per Minute2400.0
Maximum Torque (ft-lbs)1500.0
Variable SpeedYes
Maximum RPM1800.0
Length8.59 Inches
Case IncludedNo
Color / FinishRed/Black
MaterialReinforced Fiberglass
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)6.3
Weight - Excluding Battery (lbs)6.3
Number of Batteries Required1
Number of Batteries Included0
Battery Voltage (V)18
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedNo
CSA CertifiedYes
ETL ListedYes
UL ListedYes
Item#:
2864-20
Manufacturer Item:
2864-20
Your Price:
349.00
Each

The M18™ cordless 2-speed grease gun delivers maximum pressure and unmatched versatility, offering an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter that allows service and maintenance professionals to dispense precise amounts of grease. The tool's 2-speed design offers users the ability to select between max pressure and max flow rate. Other unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel. The tool's stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 48 in. flexible hose offers greater accessibility when greasing hard to reach fittings. The new tool is also compatible with a clear barrel accessory (49-19-2646). Powered by an M18™ REDLITHIUM™ battery pack, this is the industry's only 18 V grease gun that's battery is compatible with a system of tools.

Features

  • Up to 10,000 PSI max operating pressure - best in class pressure for challenging greasing applications
  • 2-Speed design - low speed delivers max pressure, high speed delivers max run-time & flow rate
  • Exclusive pre-set grease counting - dispenses pre-set amounts of grease
  • Superior balance, ergonomics and convenience - comfortable handle grip, shoulder strap compatibility, and base stand, LED light, lock-off/lock-on switch, 48 in. flexible hose, clear barrel capable
  • Air bleeder valve - priming mechanism for quick flow
  • M18 REDLITHIUM system - compatible with over 40 M18 lithium-ion solutions for greater versatility in the workplace

Specifications

Powered Tool Power SourceElectric - Cordless
Grease Gun Length (in)14.0
Grease Gun Width (in)3.0
Grease Gun Depth (in)9.5
Grease Gun Color / FinishRed/Black
Grease Gun Housing MaterialMetal
Hose Length (in)48.0
Maximum Pressure Rating (psi)10000.0
Capacity (oz)14.0
Number of Batteries Included0
Battery CompositionLithium-Ion (Li-ion)
Battery Ampere-hour (Ah)0.0
Battery Voltage (V)18
Charger IncludedNo
Charge Time (hrs)0.5
CSA CertifiedYes
ETL ListedYes
UL ListedYes
Case IncludedNo
Item#:
2646-20
Manufacturer Item:
2646-20
Your Price:
211.99
Each

25% More light, all day operation. The M18™ ROCKET™ dual power tower light is providing more light on the job with 2500 lm of TRUEVIEW™ hight definition output. All while having the capability being dual power, powered by M18™ or extension cord. The light head can be extended from 4 to 7 Ft. to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lm in its high mode, 1,100 in. medium and 700 in. low, and it can run for up to 4, 8, or 12 hours with an M18™ REDLITHIUM™ XC 5.0 battery pack. It uses TRUEVIEW™ high definition output providing neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant, and its low center of gravity provides a stable base. The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage. Its LEDS never need to be replaced, and are backed by a Limited Lifetime Warranty. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.

Features

  • 2,500 lm of TRUEVIEW™ high definition output
  • 5 Second setup, 7 ft extension
  • Dual power - powered by M18™ or extension cord
  • Low battery indicator
  • Impact Resistant reinforced legs
  • Impact resistant, adjustable light head
  • Protective light head guard when stored or in transportation

Specifications

Work Light TypeStand
Color / FinishRed/Black
MaterialPlastic
Bulb TypeLED
Lumens2500
Light ColorNatural White
Batteries IncludedNo
Battery Type18V Lithium Ion
Battery Charger IncludedNo
Voltage (V)18.0
Length7.5 Inches
Width8.0 Inches
Height40.5 Inches
Magnetic MountNo
Case IncludedNo
ANSI Safety ListingNo
Additional ContentsNone
Item#:
2131-20
Manufacturer Item:
2131-20
Your Price:
230.99
Each

At less than 4 in. in length, the Atomic 20V MAX 1/4 in. Brushless Cordless 3-Speed Impact Driver can handle tight applications like narrow cabinetry or framing without the need for an additional tool. Though the Impact Driver is lightweight and compact in size, it does not sacrifice performance with its brushless motor that delivers up to 1,825 in-lb. of torque and 3,250 rpm for driving large-diameter screws. Illuminate dim workspaces for enhanced visibility with the 3-LED on-board work light and keep your workflow consistent.

Features

  • MANEUVER WITH EASE: Compact, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
  • HIGH-PERFORMANCE BRUSHLESS MOTOR delivers 1,825 in-lb. of torque and 3,250 rpm to drive large-diameter screws
  • PRO-LEVEL CONTROL and precision with a variable 3-speed trigger
  • BRIGHTEN DARK WORK AREAS: Integrated 3-LED work light enhances visibility in dimly lit spaces

Specifications

Height8.375 in
Length4.800 in
Width3.375 in
Weight2.400 lbs
Power SourceElectric
Cordless Vs. CordedCordless
Motor TypeBrushless
Voltage20 V V
Battery IncludedYes
Battery Type20V MAX* Lithium Ion
Battery Qty1
Battery Test SummaryDEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Battery Amp Hours5 Ah Ah
Net Lit-Ion Y/NYes
Charger IncludedNo
Battery RequiredYes
Number Of Batteries Required1
Disclaimer* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
HazmatLi-Ion (<101 WH)
Prop 65 Generic WarningYes
Warranty3LM
Certifications Or ListingsCSA Listed
California Prop 65 Warning Labelhttp://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
Claims NeededYes
Chuck Size1/4 in
Drive Size1/4 in Hex
Housing MaterialPlastic
Impacts / Blows / Blasts Per Min3800
Individual Vs. Set (Syndigo)INDIVIDUAL
KitYes
Maximum Speed3250 RPM Rpm
Maximum Torque1825 In-Lbs
Maximum Torque Ft/Lbs.300
Torque1825 Lb-In
Variable SpeedYes
Item#:
DCF850B
Manufacturer Item:
DCF850B
Your Price:
149.99
Each

The M18™ FUEL™ 7/16 in. hex utility high torque impact wrench w/ ONE-KEY™ delivers the fastest drilling speed, more power, and is built for maximum control. The POWERSTATE™ brushless motor and all-new mechanism provide linemen with 30% faster drilling speed, increasing productivity on the job. With up to 750 ft-lbs max torque, this impact delivers more power for effortless removal of rusted or corroded hardware. It's ergonomically designed for the lineman, providing superior control whether in-bucket, on-ground or climbing. The extended handle offers increased grip surface, perfectly fitting high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability. This is the first 7/16 in. impact in the industry to be equipped with a QUIK-LOK™ chuck, uniquely providing faster and easier bit changes. Linemen can keep one hand firmly on the tool's handle while inserting augers, sockets and other essential accessories. The integrated lanyard loop allows for transfer and storage. REDLINK Plus™ intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The REDLITHIUM™ battery pack (not included on bare tool) is compatible with 175+ M18™ tools, delivers more work per charge and more work over the life of the pack than competitors. With ONE-KEY™, you also gain the ability to customize, track and manage your utility impact. ONE-KEY™ Technology also allows you to save up to 4 task settings directly to the tool. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment.

Features

  • Up to 30% faster drilling speed
  • Up to 750 ft-lbs max torque
  • Built for maximum control
  • POWERSTATE™ brushless motor and all-new mechanism delivers up to 30% faster drilling speed, increasing users productivity
  • Up to 750 ft-lbs max torque allows effortless removal of rusted or corroded fasteners
  • Ergonomically designed for the lineman and built for maximum control
  • Extended handle offers increased grip surface with high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability
  • QUIK-LOK™ 7/16 in. hex chuck delivers single handed bit insertion for faster, easier accessory bit installation
  • Integrated lanyard loop ensures easy transfer and storage
  • REDLINK Plus™ intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • REDLITHIUM™ battery pack - delivers more work per charge and more work over the life of the pack than competitors (2865-22 kit includes battery)
  • ONE-KEY™ compatible - ability to customize, track and manage tools for increased productivity and investment protection
  • LED light to illuminate the work area
  • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
  • Compatible with all M18™ batteries

Specifications

Powered Tool Power SourceElectric - Cordless
Cordless / CordedCordless
Impact Wrench Drive Size7/16 In. Hex
Impacts per Minute2800
Maximum Torque (ft-lbs)750
Variable SpeedYes
Maximum RPM2300
Length8.19 Inches
Case IncludedYes
Color / FinishRed/Black
MaterialReinforced Nylon
Forward / Reverse Rocker SwitchYes
Net Tool Weight (lbs)7.45
Weight - Battery Installed (lbs)7.45
Weight - Excluding Battery (lbs)5.85
Number of Batteries Required1
Number of Batteries Included2
Battery Ampere-hour (Ah)5.0
Battery Voltage (V)18
Battery CompositionLithium-Ion (Li-ion)
Charger IncludedYes
CSA CertifiedNo
ETL ListedNo
UL ListedYes
Item#:
2865-22
Manufacturer Item:
2865-22
Your Price:
605.99
Each
|◀ 253 - 288 of 361 ▶|
View:
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.