S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Air Tool Staples
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- Coated finish eases penetration and increases holding power
- Chisel point preserves the appearance of the work surface.
- Quantity: 1,000 "L" Shaped Hardwood Flooring Cleats
- Fits the following Bostitch tools: MIIIFN, MFN-200
Specifications
| Height | 5.300 IN |
| Length | 4.800 IN |
| Width | 1.600 IN |
| Weight | 4.160 LB |
| Type | FASTENERS: FINISHING NAILS |
| Battery Included | No |
Features
- Coated finish eases penetration resistance and increases holding power
- 3/16" crown
- Fits the following Bostitch® tools- S3297-LHF-2 and LHF97125
- Quantity: 5,000 crown staple
Specifications
| Height | 2.100 IN |
| Length | 5.400 IN |
| Width | 2.300 IN |
| Weight | 2.500 LB |
| Type | FASTENERS: STAPLES |
| Piece Count | 5000 |
| Finish | Galvanized |
| Primary Material | Galvanized Steel |
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- Coated finish eases penetration and increases holding power
- Chisel point preserves the appearance of the work surface
- Quantity: 5,000 finish staples
- Fits the following Bostitch tools: S32SX, S32SX-BHF-2, T40SX-CT,SB-150SX, SB-2IN1, SB150SX-HD, SX150K-1
Specifications
| Height | 5.300 IN |
| Length | 5.400 IN |
| Width | 1.500 IN |
| Weight | 4.641 LB |
| Type | FASTENERS: STAPLES |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Warranty | None |
| Piece Count | 5000 |
| Finish | Galvanized |
| Primary Material | Galvanized Steel |
Features
- ULListed (406A) and compliant with the National Electrical Code
- 1" staple leg length with 3/4" plastic insulated crown
- For use in the DEWALTDCN701 20V MAX Cordless Cable Stapler
- Can be manually driven with a hammer in tight locations
- ULapproved for single or double stacked Romex(NM Sheathed Cable) and MC (Metal Clad) cable. See ULapproved cable combinations chart for specific cable approvals.
- Also suitable for use with low voltage cables such as CAT3, CAT5, and coax.
- 540 staples per box
Specifications
| Height | 3.000 in |
| Length | 5.812 in |
| Width | 3.500 in |
| Weight | 1.500 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Disclaimer | * See UL approved cable combinations chart for specific cable approvals. |
| Warranty | MWC |
| Claims Needed | Yes |
| Crown Size | 7/32 In |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Staple Leg Length | 1 |
| Staple Type | 7/16" Crown |
| Use Location | Other |
Features
- Galvanized coating with a 2,500 nails come in each pack with 100 nails per stick.
Specifications
| Height | 1.750 in |
| Length | 5.625 in |
| Width | 3.688 in |
| Weight | 3.750 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | MWC |
| Claims Needed | No |
| Collation | Glue |
| Crown Size | 0.25 in In |
| Fastener Type | Staple |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Staple Type | 1/4" Crown |
| Use Location | Finishing |
