S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Concrete Construction
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
Specifications
Weight | 0.111 lbs |
Product Diameter Us | 3/8 IN |
Connection Design | Concrete Only |
Fastener Type | Mechanical Anchor |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Simpson Strong-Tie offers a full range of direct fastening systems designed to provide rugged reliability while keeping the job moving as fast as possible. They are also tested in the field to meet the most demanding needs of the professional. Our complete line of fasteners is extensively tested to ensure quality and performance. P27SL 0.27-caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27-caliber tools and other common 0.27-caliber tools. Available in levels 26. P27SL 0.27-Caliber Plastic, 10-Shot Strip Load, Red (100-Qty) (Pack of 10000).
Specifications
Depth | 6.875 in. |
Height | 0.4375 in. |
Width | 0.5625 in. |
Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
Simpson Strong-Tie offers a full range of direct fastening systems designed to provide rugged reliability while keeping the job moving as fast as possible. They are also tested in the field to meet the most demanding needs of the professional. Our complete line of fasteners is extensively tested to ensure quality and performance. P27SL 0.27-caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27-caliber tools and other common 0.27-caliber tools. Available in levels 26. P27SL 0.27-Caliber Plastic, 10-Shot Strip Load, Yellow (100-Qty) (Pack of 10000).
Specifications
Depth | 6.875 in. |
Height | 0.4375 in. |
Width | 0.5625 in. |
Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Specifications
Weight | 0.009 LB |
Type | FASTENERS: POWDER ACTUATED NAILS |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 0.301 lbs |
Product Diameter Us | 0.500000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Disclaimer | NULL |
Prop 65 Generic Warning | Yes |
Claims Needed | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 5.5 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Specifications
Height | 0.500 IN |
Length | 6.500 IN |
Width | 0.050 IN |
Weight | 0.710 LB |
Type | FASTENERS: DROP-INS & LAG SHIELDS |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 1.125 lbs |
Product Diameter Us | 0.875000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Net Lit-Ion Y/N | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 6.0 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
Weight | 0.002 LB |
Type | FASTENERS: POWDER ACTUATED NAILS |
Prop 65 Generic Warning | No |
Primary Material | Brass |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 0.374 lbs |
Product Diameter Us | 0.500000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Disclaimer | NULL |
Claims Needed | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 7.0 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 1.205 lbs |
Product Diameter Us | 0.750000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Disclaimer | NULL |
Claims Needed | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 10.0 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 0.08 lbs |
Product Diameter Us | 0.375000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Net Lit-Ion Y/N | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 2.25 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 0.502 lbs |
Product Diameter Us | 0.500000 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Net Lit-Ion Y/N | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 10.0 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
Weight | 0.003 LB |
Type | FASTENERS: POWDER ACTUATED NAILS |
Battery Included | No |
Disclaimer | NULL |
Prop 65 Generic Warning | No |
Primary Material | Brass |
Features
- Installs with reduced effort compared to traditional drop in style anchors
- Can be installed using the manual setting tool or Smart DI system with a hammer-drill
- Setting indicator makes identification of properly set anchors easy (when installed using the smart tool and smart bit)
- Internally threaded anchor for easy bolt removability and service work
Specifications
Height | 0.650 in |
Length | 5.000 in |
Width | 0.650 in |
Weight | 0.454 lbs |
Product Diameter Us | 1/2 IN |
Individual Vs. Set (Syndigo) | SET |
Size (String) | 1/2 in |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
Weight | 0.23 lbs |
Product Diameter Us | .5 IN |
Power Source | NON-ENERGY USING |
Battery Included | No |
Disclaimer | NULL |
Prop 65 Generic Warning | No |
Claims Needed | No |
Connection Design | Concrete & Masonry |
Design Type | Hex |
Fastener Length | 3.75 |
Fastener Plating | Zinc |
Fastener Type | Mechanical Anchor |
Head Style | Hex Nut |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Thread Type | Standard |
