S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Mechanical Anchors
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Specifications
| Weight | 0.009 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
- Sleeve has 360° contact area for even stress distribution
- Versatile can be used for solid and hollow concrete or masonry applications
Specifications
| Weight | 0.027 lbs |
| Product Diameter Us | 0.25 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete Only |
| Fastener Length | 1.375 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
Specifications
| Weight | 0.111 lbs |
| Product Diameter Us | 3/8 IN |
| Connection Design | Concrete Only |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Simpson Strong-Tie offers a full range of direct fastening systems designed to provide rugged reliability while keeping the job moving as fast as possible. They are also tested in the field to meet the most demanding needs of the professional. Our complete line of fasteners is extensively tested to ensure quality and performance. P27SL 0.27-caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27-caliber tools and other common 0.27-caliber tools. Available in levels 26. P27SL 0.27-Caliber Plastic, 10-Shot Strip Load, Red (100-Qty) (Pack of 10000).
Specifications
| Depth | 6.875 in. |
| Height | 0.4375 in. |
| Width | 0.5625 in. |
| Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
Simpson Strong-Tie offers a full range of direct fastening systems designed to provide rugged reliability while keeping the job moving as fast as possible. They are also tested in the field to meet the most demanding needs of the professional. Our complete line of fasteners is extensively tested to ensure quality and performance. P27SL 0.27-caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27-caliber tools and other common 0.27-caliber tools. Available in levels 26. P27SL 0.27-Caliber Plastic, 10-Shot Strip Load, Yellow (100-Qty) (Pack of 10000).
Specifications
| Depth | 6.875 in. |
| Height | 0.4375 in. |
| Width | 0.5625 in. |
| Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.330 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Weight | 0.452 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Wood to Wood |
| Fastener Length | 8 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 4 in |
| Weight | 0.148 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Charger Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 4 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 3 in |
| Weight | 0.117 lbs |
| Product Diameter Us | .375 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | Yes |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 3 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.9 in |
| Length | 4.6 in |
| Width | 6.4 in |
| Weight | 0.101 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.5 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.824 lbs |
| Product Diameter Us | 0.625000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 10.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Features
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- Consistent performance in high and low strength concrete
Specifications
| Package Height | 3.500 |
| Package Length | 4.100 |
| Package Weight | 0.436 |
| Package Width | 10.700 |
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Specifications
| Weight | 0.014 lbs |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Height | 1 in |
| Length | 3 in |
| Width | 1 in |
| Weight | 0.236 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.210 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.5 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.15 lbs |
| Product Diameter Us | 0.375000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 5.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
Specifications
| Weight | 0.159 lbs |
| Product Diameter Us | 1/2 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.208 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Fastener Length | 6 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
| Weight | 0.002 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
| Prop 65 Generic Warning | No |
| Primary Material | Brass |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.9 in |
| Length | 5 in |
| Width | 7.2 in |
| Weight | 0.177 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 5 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- General purpose anchoring
- Installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
Specifications
| Height | 1.5 in |
| Length | 1.50 in |
| Width | 1.5 in |
| Weight | 0.025 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.50 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.9 in |
| Length | 4.6 in |
| Width | 6.5 in |
| Weight | 0.042 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.25 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
Specifications
| Weight | 0.046 lbs |
| Product Diameter Us | 1/4 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.625 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.6 in |
| Length | 3.9 in |
| Width | 5.6 in |
| Weight | 0.034 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.6 in |
| Length | 3.9 in |
| Width | 5.6 in |
| Weight | 0.028 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.25 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.5 in |
| Length | 3.9 in |
| Width | 5.6 in |
| Weight | 0.078 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.9 in |
| Length | 5 in |
| Width | 7.2 in |
| Weight | 0.051 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Features
- Manufactured with an 8mm head and 0.157" diameter shank in various lengths
- Spiral knurled shank design provides consistent optimized performance in steel base materials
- Permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel
- Qty: 100
Specifications
| Weight | 0.006 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
| Prop 65 Generic Warning | No |
| Diameter | 1.06 |
| Piece Count | 1 |
| Finish | Silver |
| Primary Material | Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.750 lbs |
| Product Diameter Us | 0.750000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | Yes |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 5.5 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
