S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Mechanical Anchors
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.08 lbs |
| Product Diameter Us | 0.375000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 2.25 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.502 lbs |
| Product Diameter Us | 0.500000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 10.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
| Weight | 0.003 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Primary Material | Brass |
Features
- Installs with reduced effort compared to traditional drop in style anchors
- Can be installed using the manual setting tool or Smart DI system with a hammer-drill
- Setting indicator makes identification of properly set anchors easy (when installed using the smart tool and smart bit)
- Internally threaded anchor for easy bolt removability and service work
Specifications
| Height | 0.650 in |
| Length | 5.000 in |
| Width | 0.650 in |
| Weight | 0.454 lbs |
| Product Diameter Us | 1/2 IN |
| Individual Vs. Set (Syndigo) | SET |
| Size (String) | 1/2 in |
Features
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- Consistent performance in high and low strength concrete
Specifications
| Package Height | 3.800 |
| Package Length | 4.800 |
| Package Weight | 0.716 |
| Package Width | 12.800 |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 1.410 lbs |
| Product Diameter Us | 0.875000 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 8.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Drive pins with an 8mm diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145" diameter shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation.
Specifications
| Weight | 0.006 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.475 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 1.495 lbs |
| Product Diameter Us | 1.000000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 6.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.187 lbs |
| Product Diameter Us | 0.500000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 2.75 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.036 lbs |
| Product Diameter Us | 0.250000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 2.25 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Weight | 0.692 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Wood to Wood |
| Fastener Length | 8 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 6 in |
| Weight | 0.548 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 6 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 5 in |
| Weight | 0.476 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 5 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Height | 1 in |
| Length | 6 in |
| Width | 1 in |
| Weight | 0.914 lbs |
| Product Diameter Us | 3/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 6 |
| Fastener Type | Screw |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.322 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Specifications
| Height | 0.500 IN |
| Length | 5.500 IN |
| Width | 0.500 IN |
| Weight | 0.275 LB |
| Type | FASTENERS: DROP-INS & LAG SHIELDS |
Features
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- Consistent performance in high and low strength concrete
Specifications
| Package Height | 3.0 |
| Package Length | 4.7 |
| Package Weight | 0.093 |
| Package Width | 6.4 |
Specifications
| Weight | 0.002 lbs |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.059 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Features
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- Consistent performance in high and low strength concrete
Specifications
| Package Height | 3.3 |
| Package Length | 6.0 |
| Package Weight | 0.61 |
| Package Width | 8.5 |
Features
- Maximum durability and stability for setting masonry screws and concrete anchors
- 2-in-1 quick drill and anchor fastening system
- Compatible with 5/32", 3/16" and 1/4" Concrete Anchor Hammer Drill Bits
- Compatible with quick change bits and nut setters
- Maximum performance in cordless and corded SDS-Plus rotary hammers and 1/4 in. hex tools
Cuts
- Concrete
- Brick/Block
Applications
- Anchor setting
Specifications
| Length | 5-3/4" |
| Number of Cutters | 2 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5-3/4" |
Specifications
| Weight | 0.007 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
Drive pins with an 8mm diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145" diameter shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation.
Specifications
| Weight | 0.006 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
Drive pins with an 8mm diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145" diameter shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation.
Specifications
| Weight | 0.025 lbs |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.198 lbs |
| Product Diameter Us | 0.375000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 7.0 |
| Fastener Plating | Zinc |
| Fastener Type | Mechanical Anchor |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
Hangermate is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications. They are available in versions which can be installed in a variety of base materials including steel purlins, bar joists and beams, wood frame columns and beams, as well as concrete ceilings, beams and columns. Steel threaded rods in 1/4 and 3/8" diameters can be vertically suspended with Hangermate (a 1/2" diameter size is also available for wood). They are also offered in a side mount style for lateral installation of 1/4" and 3/8" diameter steel threaded rods onto joists, columns and overhead members. For all steel and wood hangers, a Hangermate Socket Driver is recommended to provide proper installation with a drill screw gun. For concrete hangers, a powered impact tool with a clutch is recommended. A pivot head version is also available for flexible connection angle and positioning of rod hangers. An acoustical ceiling eyelet version is also available for hanging wire or cable attachments.
Features
- Ease and speed of overhead installation
- Lower in-place cost, when compared to beam clamps, lag bolts and drop-ins
- Steel and wood Hangermate can be installed with a drill screw gun
- Side mount versions available for steel and wood Hangermate
Specifications
| Height | 0.750 in |
| Length | 0.978 in |
| Width | 0.244 in |
| Weight | 0.074 lbs |
| Power Source | NON-ENERGY USING |
Specifications
| Height | 0.500 IN |
| Length | 5.000 IN |
| Width | 0.500 IN |
| Weight | 0.130 LB |
| Type | FASTENERS: DROP-INS & LAG SHIELDS |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
- Sleeve has 360° contact area for even stress distribution
- Versatile can be used for solid and hollow concrete or masonry applications
Specifications
| Weight | 0.073 lbs |
| Product Diameter Us | 0.375 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete Only |
| Fastener Length | 0.375 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
| Weight | 0.003 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Primary Material | Brass |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
| Weight | 0.002 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
| Prop 65 Generic Warning | No |
| Primary Material | Brass |
Specifications
| Weight | 0.031 LB |
| Type | FASTENERS: POWDER ACTUATED NAILS |
