S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Features
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in. Demolition body for straighter cuts with less vibration
- Ultra hardened edge increases the hardness of the cutting edge to a Rockwell Hardness of HRC 62 versus HRC 55 for standard blades
- A one-of-a-kind tip design that enables faster and easier plunging
Cuts
- Metal Less Than 1/8"
Applications
- Metal (Thin Metal)
Specifications
| Length | 9" |
| Pack Quantity | 25 |
| Tooth Design | Dual Tooth |
| TPI | 20/24 |
Features
- Bi-metal construction for longer life
- 10 TPI for smooth cutting in metals, woods, and plastics
- Universal fit for U-Shank Corded/ Cordless Jig Saws
- Made in Switzerland
- 4 in. length
- 10 TPI
- 9/32 in. width, U-Shank
- 5 blades per package
Specifications
| Blade Cutting Material | Bimetal |
| Blade Length (in) | 4.0625 |
| Blade Thickness (in) | 0.1 |
| Jig Saw Blade Type | Jig Saw U-Shank |
| Material Cut | Multi-Purpose |
| Tooth Count | 42 |
| Progressive Blade Tooth Spacing | No |
| Saw Blade Type | Jig Saw |
| Set / Individual | Set |
| Teeth per Inch | 10 |
| Net Tool Weight (lbs) | 0.07 |
Cuts
- Hardwoods
- 2X Lumber
- Pressure Treated
- OSB
Features
- TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Applications
- Wood Cutting
Specifications
| Arbor | 10mm |
| Diameter | 5-3/8" |
| Hook Angle | 2° |
| Kerf | .049" |
| Plate | .039" |
| Max RPM | 12000 |
| Teeth | 36 ATB |
Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a 'must-have' tool for both professionals and DIYers planning composite decking projects. Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD® non-stick coating, and specific TiCo™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life .
Applications
- Composite-Plastics Cutting
Cuts
- Composite Decking
- Cellular PVC
Features
- Specially formulatedTiCo™ Hi-Density carbide to maximize cutting life in composite decking materials and plastics
- Modified Triple Chip Grind (MTCG) enables the material to remain cool while cutting for melt-free cuts
- Laser cut stabilizer vents keep the blade straight and true for superior quality cuts and no swirl marks
- Thin Kerf design requires less cutting power, making them ideal for underpowered saws at the jobsite
- Perma-SHIELD Non-stick coating reduces drag and shield s the blade against heat, gumming and corrosion
Specifications
| Arbor | 5/8" |
| Diameter | 10" |
| Hook Angle | -3° |
| Kerf | .102" |
| Plate | .071" |
| Teeth | 72 MTCG |
Diablo's universal fit bi-metal oscillating blades feature application specific designs that deliver maximum durability and longer life in nail-embedded wood applications. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. The blade's universal fit, adapter-free design easily attaches most tools, with the exception of Starlock tools.
Features
- 3-Pack provides up to 33% in savings
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-1/2 in. cutting depth
- Universal interface design fits most tools, no adapters needed
- Maximum performance in cordless and corded oscillating multi-tools from Bosch®, Craftsman®, Dewalt®, Dremel®, Fein®, Hart®, Makita®, Milwaukee®, Porter-Cable®, Ridgid®, Rockwell® and more
- Not compatible with Starlock tools
Cuts
- Nail Embedded Wood
- Hardwoods
- Softwoods
Applications
- Nail-Embedded Wood
Specifications
| Cut Depth (C) | 1-1/2" |
| Pack Quantity | 3 |
| Tooth Design | Bi-Metal |
| Width of Cut | 2-1/2" |
| Interface | Universal Fit |
Diablo Cordless Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablos unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and frames more houses than other framing blades
Features
- TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Cuts
- Hardwoods
- 2X Lumber
- Pressure Treated
- OSB
- Laminated Beams
Applications
- Cutting Wood Framing
Specifications
| Arbor | 10mm |
| Diameter | 5-3/8" |
| Hook Angle | 18° |
| Kerf | .049" |
| Plate | .039" |
| Max RPM | 12000 |
| Teeth | 24 ATB |
Cuts
- Metal 1/8" to 1/2"
- Cast Iron Pipe
- Pipe
- High Strength Alloys
- Stainless Steel Materials
- Angle, Tubing
Features
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16" to 9/16"
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 in. oversized blade body for straighter cuts with less vibration
- Perma-SHIELD non-stick coating for less heat and friction
Applications
- Thick metals (3/16" to 9/16")
Specifications
| Length | 4" |
| Pack Quantity | 3 |
| Tooth Design | Carbide Teeth |
| TPI | 8 |
Diablo's universal fit carbide oscillating blades feature application specific designs that deliver extreme durability and superior cutting life in metals. High-performance carbide teeth deliver an unmatched up to 50X longer cutting life versus standard bi-metal blades. An optimized blade and tooth design along with Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. The blade's universal fit, adapter-free design easily attaches to most tools, with the exception of Starlock tools.
Features
- High performance carbide for greater durability and up to 50X longer life versus standard bi-metal blades
- Optimized tooth geometry provides fast cuts in metal applications
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-1/2 in. cutting depth
- Universal interface design fits most tools, no adapters needed
- Maximum performance in cordless and corded oscillating multi-tools from Bosch®, Craftsman®, Dewalt®, Dremel®, Fein®, Hart®, Makita®, Milwaukee®, Porter-Cable®, Ridgid®, Rockwell® and more
- Not compatible with Starlock tools
Applications
- Metal
Cuts
- Metal
Specifications
| Cut Depth (C) | 1-1/2" |
| Pack Quantity | 1 |
| Tooth Design | Carbide |
| Width of Cut | 1-1/4" |
| Interface | Universal Fit |
Features
- Bi-metal construction for longer life
- 14 TPI for cutting in medium metals
- Universal fit for U-Shank Corded/ Cordless Jig Saws
- Made in Switzerland
- 3-5/8 in. length
- 14 TPI
- 9/32 in. width, U-Shank
- 5 blades per package
Specifications
| Blade Cutting Material | Bimetal |
| Blade Length (in) | 3.67 |
| Blade Thickness (in) | 0.1 |
| Jig Saw Blade Type | Jig Saw U-Shank |
| Material Cut | Multi-Purpose |
| Tooth Count | 50 |
| Progressive Blade Tooth Spacing | No |
| Saw Blade Type | Jig Saw |
| Set / Individual | Set |
| Teeth per Inch | 14 |
| Saw Blade Width (In) | 0.28125 |
| Net Tool Weight (lbs) | 0.055 |
Features
- Full Contact Arched Design provides more working teeth within the material for faster cuts in fewer passes resulting in less heat build-up to deliver 5x longer cutting performance
- Dual tooth design features a double tooth configuration with small gullets for faster material removal and extra durability.
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in Demolition body for straighter cuts with less vibration.
Cuts
- Metal 1/16" to 1/8"
- Angle, Tubing
Applications
- Medium metals (1/16" to 5/16")
Specifications
| Length | 12" |
| Pack Quantity | 25 |
| Tooth Design | Dual Tooth |
| TPI | 14/18 |
Diablo's new Demo Demon Carbide pruning and fast clean wood blades feature an aggressive carbide tooth geometry for an unmatched 50 times longer cutting life, faster cuts and increased productivity in pruning and clean wood cutting applications. These industry first carbide blades are designed with large gullets and a strengthened, oversized blade body for fast chip removal in extreme cutting applications. In addition, these radical blades feature Perma-Shield non-stick coating to prevent gumming and friction for fast, effortless cuts in some of the toughest wood cutting scenarios.
Features
- Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
- Ultimate cutting performance in clean wood and pruning applications
- Aggressive carbide tooth geometry delivers fast and effortless cuts
- Large blade gullets between teeth provide fast chip removal
- Strengthened, oversized blade body for extreme cutting applications
Cuts
- Branches
- Clean Wood
Applications
- Pruning and clean wood cutting
Specifications
| Length | 12" |
| Pack Quantity | 3 |
| Tooth Design | Carbide Teeth |
| TPI | 3 |
Introducing THE NEXT DIMENSION IN POWER with the 20V MAX DEWALT POWERSTACK Compact Battery 2-Pack. Get 50% more power with a 25% smaller footprint using batteris that work with the 20V MAX tools and chargers you already have. These batteries provide twice the lifetime of batteries with standard cylindrical cells and features an impact-resistant, overmolded base with non-marring material. Take advantage of our lightest and most powerful battery as the rubber overmold base and twice the lifetime combine to form a dependable lithium-ion solution.
Features
- 50% more power in a 25% more compact battery
- DESIGNED TO RESIST WEAR-AND-TEAR: Durable, overmolded base provides impact resistance
- LONG-LASTING: Battery provides 2X lifetime
- AVOID UNPLANNED WORK STOPPAGES: LED fuel gauge displays state-of-charge
- 20V MAX SYSTEM COMPATIBILITY: Battery works with all DEWALT20V MAX tools and chargers
Specifications
| Height | 8.750 in |
| Length | 6.500 in |
| Width | 3.060 in |
| Weight | 1.600 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 0.7 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 1.7 Ah Ah |
| Watt Hours | 34 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | No |
| Battery Required | Yes |
| Charge Time | 35 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | Regarding 50% more power: vs. DCB203 battery, not in application. | Regarding 25% smaller pack and more compact: footprint vs. DCB203 battery. | Regarding 15% lighter and our lightest and most powerful: vs. DEWALT 20V MAX* batteries 2.0Ah or lower. | Regarding 2x lifetime: charge cycles vs DCB203 battery. | Milwaukee is a registered trademark of Milwaukee Electric Tool Corp., which has not endorsed or approved this comparison. | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** Regarding 50% more power: vs. DCB203 battery, not in application. Regarding 25% smaller pack and more compact: footprint vs. DCB203 battery. Regarding our lightest and most powerful: vs. DEWALT 20V MAX* batteries 2.0Ah or lower. Regarding 2x lifetime: charge cycles vs DCB203 battery. |
| Hazmat | C1 |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Hazmat Code | A1 |
| Bare Tool | Yes |
| Case Type | No Case Included |
| Compatibility | 20V MAX SYSTEM COMPATIBILITY: Battery works with all DEWALT® 20V MAX tools and chargers |
| Fuel Gauge | Yes |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Kit | No |
Features
- High grain concentration for smooth, aggressive cutting
- 5/64 in. thin wheel design for fast, burr-free cuts
- Optimized design for FLEXVOLT Cutoff Saw (DCS690), for long runtime and maximum productivity on the jobsite
- Metal Cutting: Medium-Heavy Wall Pipe, General Weld, and Structural Steel
Specifications
| Height | 0.900 in |
| Length | 9.000 in |
| Width | 9.000 in |
| Weight | 0.400 lbs |
| Product Diameter Us | 9 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Disclaimer | To reduce the risk of injury: Wear proper eye, face, body, and respiratory protection. Do not drop. Comply with ANSI B7.1 & OSHA. Do not exceed max RPM marked on wheel. Use proper guards. |
| Prop 65 Generic Warning | No |
| Warranty | NLW |
| Claims Needed | Yes |
| 7/8 In Diamond Arbor Knockout | No |
| Arbor Size | 7/8 in |
| Blade Diameter | 9 in In. |
| Blade Material | Ceramic |
| Cuts Into | Metal |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 6600 RPM Rpm |
| Thickness | 0.045 In |
| Wheel Diameter | 9 in In. |
Specifications
| Weight | 2.15 |
| Length | 4.75 |
| Width | 10.625 |
| Height | 9.625 |
Cuts
- Metal 1/16" to 1/8"
- Angle, Tubing
Features
- Full Contact Arched Design provides more working teeth within the material for faster cuts in fewer passes resulting in less heat build-up to deliver 5x longer cutting performance
- Dual Tooth design features a double tooth configuration with small gullets for faster material removal and extra durability.
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in Demolition body for straighter cuts with less vibration.
Applications
- Medium metals (1/16" to 5/16")
Specifications
| Length | 6" |
| Pack Quantity | 5 |
| Tooth Design | Dual Tooth |
| TPI | 14/18 |
Cuts
- Clean Wood
- Nail Embedded Wood
- Metal 3/32" to 5/16"
- Plastic
- Angle, Tubing
Features
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- Optimal Flex body height for flush cutting
- Unique tooth configuration for smoother cuts with less vibration
Applications
- Flush Nail-embedded wood
- metal
Specifications
| Length | 9" |
| Pack Quantity | 5 |
| Tooth Design | Bi-Metal |
| TPI | 10/14 |
Features
- Superior quality diamond edge rim design for up 60% smoother cuts, resulting in chip-free cuts without burn marks
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Utlra-thin constant contact continuous turbo rim design provides precise cuts at high rates of speed
- Compatible with 7/8", 20mm and 5/8" arbors
- Includes two bushings: 20mm and 5/8"
- For dry and wet cutting
Cuts
- Granite
- Marble
- Porcelain
- Tile
Applications
- Cutting Masonry
Specifications
| Arbor | 3/8" |
| Diameter | 3" |
| Hub Type | 1/41 |
| Kerf | 1.4mm |
| Pack Quantity | 1 |
| Max RPM | 20000 |
| Thickness | 1.3mm |
| Rim Design | Continuous |
Features
- New Variable Tooth Design provides faster cuts with less vibration in nail-embedded wood
- High performance carbide for greater durability and cutting performance
- Enhanced carbide tip to blade connection for extreme impact resistance
- Unique plunge tip design that enables faster and easier plunging
- 1 in. oversized blade body for straighter cuts with less vibration
Applications
- Nail-embedded wood
Cuts
- Clean Wood
- Nail Embedded Wood
Specifications
| Length | 12" |
| Pack Quantity | 10 |
| Tooth Design | Carbide Teeth |
| TPI | 5/7 |
Diablo's 7-1/4 in. 24-tooth Demo Demon™ Framing/Demolition saw blade features industry first technology to deliver extreme performance, superior control and maximum efficiency in cordless and corded saws. Dura-Carbide™, a specialized blend of Diablo made TiCo™ hi-density carbide, extends cutting life up to 10-times and doubles the durability versus standard blades in demolition applications. Chamber Alternate Top Bevel tooth geometry features a three-tooth grind sequence for ultimate tracking control, while a super-thin kerf blade body delivers up to 65% more cuts per charge. Lock-Tooth™ technology ensures the strongest tip-to-blade connection in extreme impact situations when encountering abrasive materials such as shingles, bolts or nail-embedded wood.
Features
- Diablo made Dura-Blend™ carbide for extreme durability and up to 10x longer cutting life
- Chamber Alternate Top Bevel (ATB) tooth geometry for ultimate tracking control
- Twice the carbide surface area for greater impact resistance and double the durability in nail-embedded wood
- Super-thin laser cut thin kerf design provides ease of feed, accuracy and maximum performance in cordless saws
- Extreme cutting efficiency in cordless and corded saws by offering up to 65% more cuts per battery charge versus other blades
- Lock-Tooth™ Technology for extreme impact resistance
- Enhanced anti-vibration design provides the ideal combination of stability and rigidity
- Perma-SHIELD® non-stick coating protects the blade against heat, gumming and corrosion
Cuts
- Hardwoods
- 2X Lumber
- Pressure Treated
- OSB
- Laminated Beams
- Demolition
Applications
- Ultimate Wood Framing/Demolition
Specifications
| Arbor | 5/8" |
| Diameter | 7-1/4" |
| Hook Angle | 15° |
| Kerf | .059" |
| Plate | .040" |
| Max RPM | 8000 |
| Teeth | 24 PYR |
The Milwaukee® 10 piece SAWZALL® blade set features an assortment of standard wood and metal cutting SAWZALL® blades for a broad range of professional applications. The set includes two 6 in. wood cutting blades for increased control, one 9 in. wood cutting blade for greater cutting capacity, three 6 in. 14TPI blades for medium to thick metal cutting, three 6 in. 24 TPI blades for thin metal cutting. And one 9 in. 18 TPI blade for medium metal cutting. The set also includes a durable job site case for convenient blade storage.
Features
- Wood cutting blades have a 5 TPI design for fast aggressive cuts
- Nail Guard™ to protect teeth from fractures
- Fang Tip™ bites into the wood on first contact for plunge cuts
- Optimized tooth design providing longer life than standard bi-metal blades
- SAWZALL® blades Tough Neck™ ribs strengthen the blade tang and minimize breakage
- 1/2 in. universal tang
- Durable jobsite storage case holds up to 9 in. blades
Specifications
| Progressive Blade Tooth Spacing | No |
| Set / Individual | Set |
| Blade Thickness (In) | .050 |
| Blade Material | Bi-Metal |
| Saw Blade Type | Reciprocating Saw |
| Blade Type | Reciprocating Saw Blades |
| Material Cut | Multi-Purpose |
| Blade Lengths | 6", 9" |
Features
- Nail Guard™ combines an aggressive 5 TPI pattern for faster cutting, with a unique design that protects against tooth fractures.
- The Fang Tip™ design bites into wood on first contact for faster plunging.
- Optimized tooth design providing 2X more life than our previous generation SAWZALL® blades
- Tough Neck™ ribs strengthen the blade tang and minimize breakage
- Double relief angle reduces tooth stress for long life
- Matrix II bi-metal teeth for greater durability
- Thicker blade Stock for maximum durability.
- 1 in. tall blade profile for straighter cuts.
- Double relief angle reduces tooth stress for long life.
- Matrix II bi-metal teeth for greater durability.
- Jobsite durable storage case adjusts to hold up to 9 in. blades.
Specifications
| Progressive Blade Tooth Spacing | No |
| Set / Individual | Set |
| Blade Thickness (In) | .05 |
| Blade Material | bi-metal |
| Saw Blade Type | Reciprocating Saw |
| Blade Type | Metal |
| Material Cut | Wood |
| Blade Lengths | 6 In., 9 In. |
Features
- 1" tall profile for TOUGH, STRAIGHT CUTS
- Demolition blades are thicker for maximum durability
- The Ax™ wood cutting Sawzall blades feature FANG TIP™ and NAIL GUARD™
- The Torch™ metal cutting blades feature GRID IRON™ and TOUGH NECK™
Specifications
| Progressive Blade Tooth Spacing | No |
| Set / Individual | Set |
| Blade Thickness (In) | .05 |
| Blade Material | Bi-metal |
| Saw Blade Type | Reciprocating Saw |
| Blade Type | Metal |
| Material Cut | Wood |
| Blade Lengths | 6 in. and 9 in. |
Features
- Bi-metal construction for longer life
- Range of TPIs for variety of cuts
- Universal fit for U-Shank Corded/ Cordless Jig Saws
- Made in Switzerland
- Variety of blade lengths
- Variety of TPIs
- 9/32 in. width, U-Shank
- 5 blades per package
- Includes (1) 48422120 2-3/4" 18TPI U-Shank Metal Cutting Bi-Metal Jig Saw Blade
Specifications
| Blade Cutting Material | Bimetal |
| Blade Length (in) | 4.0 |
| Blade Thickness (in) | 0.15 |
| Jig Saw Blade Type | Jig Saw U-Shank |
| Material Cut | Metal |
| Tooth Count | 15 |
| Progressive Blade Tooth Spacing | Yes |
| Saw Blade Type | Jig Saw |
| Set / Individual | Set |
| Teeth per Inch | Varies |
| Saw Blade Width (In) | 0.75 |
| Net Tool Weight (lbs) | 0.06 |
| Tooth Type | Taper |
Cuts
- Clean Wood
- Nail Embedded Wood
Applications
- Nail-embedded wood
Features
- New Variable Tooth Design provides faster cuts with less vibration in nail-embedded wood
- High performance carbide for greater durability and cutting performance
- Enhanced carbide tip to blade connection for extreme impact resistance
- Unique plunge tip design that enables faster and easier plunging
- 1 in. oversized blade body for straighter cuts with less vibration
Specifications
| Length | 12" |
| Pack Quantity | 3 |
| Tooth Design | Carbide Teeth |
| TPI | 5/7 |
Diablo's new Demo Demon Carbide pruning and fast clean wood blades feature an aggressive carbide tooth geometry for an unmatched 50 times longer cutting life, faster cuts and increased productivity in pruning and clean wood cutting applications. These industry first carbide blades are designed with large gullets and a strengthened, oversized blade body for fast chip removal in extreme cutting applications. In addition, these radical blades feature Perma-Shield non-stick coating to prevent gumming and friction for fast, effortless cuts in some of the toughest wood cutting scenarios.
Cuts
- Branches
- Clean Wood
Features
- Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
- Ultimate cutting performance in clean wood and pruning applications
- Aggressive carbide tooth geometry delivers fast and effortless cuts
- Large blade gullets between teeth provide fast chip removal
- Strengthened, oversized blade body for extreme cutting applications
Applications
- Pruning and clean wood cutting
Specifications
| Length | 9" |
| Pack Quantity | 10 |
| Tooth Design | Carbide Teeth |
| TPI | 3 |
