S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Professional contractors rely on DEWALT Spade Bits when they need to quickly bore clean holes for electrical, plumbing, framing and more. Featuring a heavy-duty, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with an optimized cutting groove which provides fast chip removal, and a ¼" ball groove shank offer easy quick changes in impact drivers. Chamfered corners boost durability especially against nail impacts. Available in sizes ranging from 1/4 in. to 1-3/8 in. Dia, available lengths 6" and 16".
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.079 lbs |
| SHANK LENGTH | 1 in |
Professional contractors rely on DEWALT Spade Bits when they need to quickly bore clean holes for electrical, plumbing, framing and more. Featuring a heavy-duty, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with an optimized cutting groove which provides fast chip removal, and a ¼" ball groove shank offer easy quick changes in impact drivers. Chamfered corners boost durability especially against nail impacts. Available in sizes ranging from 1/4 in. to 1-3/8 in. Dia, available lengths 6" and 16".
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.071 lbs |
| SHANK LENGTH | 1 in |
Professional contractors rely on DEWALT Spade Bits when they need to quickly bore clean holes for electrical, plumbing, framing and more. Featuring a heavy-duty, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with an optimized cutting groove which provides fast chip removal, and a ¼" ball groove shank offer easy quick changes in impact drivers. Chamfered corners boost durability especially against nail impacts. Available in sizes ranging from 1/4 in. to 1-3/8 in. Dia, available lengths 6" and 16".
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.106 lbs |
| SHANK LENGTH | 1 in |
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.105 lbs |
| SHANK LENGTH | 1 in |
Professional contractors rely on DEWALT Spade Bits when they need to quickly bore clean holes for electrical, plumbing, framing and more. Featuring a heavy-duty, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with an optimized cutting groove which provides fast chip removal, and a ¼" ball groove shank offer easy quick changes in impact drivers. Chamfered corners boost durability especially against nail impacts. Available in sizes ranging from 1/4 in. to 1-3/8 in. Dia, available lengths 6" and 16".
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.104 lbs |
| SHANK LENGTH | 1 in |
Professional contractors rely on DEWALT Spade Bits when they need to quickly bore clean holes for electrical, plumbing, framing and more. Featuring a heavy-duty, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with an optimized cutting groove which provides fast chip removal, and a ¼" ball groove shank offer easy quick changes in impact drivers. Chamfered corners boost durability especially against nail impacts. Available in sizes ranging from 1/4 in. to 1-3/8 in. Dia, available lengths 6" and 16".
Specifications
| Height | 0.25 in |
| Length | 7.75 in |
| Width | 1.87 in |
| Weight | 0.096 lbs |
| SHANK LENGTH | 1 in |
15/16" - 130-AG 1/2 SHK SUPER PRM
Features
- Double-ended bits for quick bit changes
- Assorted pack includes three double-ended Square drive bits: #1, #2 and #3
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-1/2" |
| Pack Quantity | 3 |
| Screwdriver Head | SQ1/SQ1, SQ2/SQ2, SQ3/SQ3 |
| Screwdriver Style | Square |
Features
- 60-Grit sanding plate for fast removal and leveling of paint & varnish
- Open-coat carbide grit reduces material buildup and clogging
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Recommended speed 2/3 max OPM
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Cuts
- Hardwoods
- Softwoods
Applications
- Sanding
Specifications
| Pack Quantity | 1 |
| Tooth Design | Carbide Grit |
| Width of Cut | 3-1/2" |
| Interface | Starlock |
Diablo's Starlock bi-metal oscillating blades feature application specific designs that deliver maximum durability and longer life in clean wood applications. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. An optimized Japanese tooth design and Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. Tool free quick-change interface fits Fein and other Starlock tools; also compatible with most non-Starlock multi-tools.
Cuts
- Hardwoods
- Softwoods
Features
- 3-Pack provides up to 33% in savings
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- Japanese Tooth Design for fast cuts
- 2 in. cutting depth
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Applications
- Clean Wood
Specifications
| Cut Depth (C) | 2" |
| Pack Quantity | 3 |
| Tooth Design | Bi-Metal |
| Width of Cut | 1-1/4" |
| Interface | Starlock |
Applications
- Cut-Off
Features
- Multi-material cut-off disc for a variety of applications
- Reinforced steel disc body for more controlled cuts
- Advanced laser melting process for longer life
- Carbide grit cutting edge produces less sparks and dust
- Maintains cutting diameter for more consistent cutting results and longer life
- Does not shatter, break or damage the cutting edge when dropped
- Not recommended for metal cutting applications
- For Dry Cutting
- Optimized for 3 in. compact saws from manufactures such as: Milwaukee® (3/8" arbor; 20,000 RPM), Ryobi® (3/8" arbor; 19,000 RPM) and Ridgid® (3/8" arbor, 19,500 RPM)
Cuts
- Nail Embedded Wood
- Clean Wood
- Plastics
- Fiber Cement
- Drywall
Specifications
| Arbor | 3/8" |
| Diameter | 3" |
| Grit Blend | Carbide |
| Hub Type | 1/41 |
| Pack Quantity | 1 |
| Max RPM | 20000 |
| Thickness | 1.8mm |
| Rim Design | Segmented |
Our Impact Ready titanium drilling accessories now come in ToughCase+ system, the latest addition to our accessory storage line. The ToughCase+ system is a connectable case system designed to optimize storage space and keep your impact driver drill bit set organized. The patented bit-bar design allows for easy bit removal and the clear lid allows you to see inside at a glance. Constructed from one solid piece of heavy-duty metal, DEWALT Impact Ready titanium drill bits are up to 5 times more durable than 2-piece conventional bits. A patented web taper helps to increase bit strength, and a proprietary Pilot point tip delivers speed and clear, burr-free holes with helps to reduced bit walking. Ideal for metal, wood, and plastic.
Includes
- 1/16" x 2
- 5/64" x 2
- 3/32" x 2
- 7/64" x 2
- 1/8" x 2
- 9/64" x 1
- 5/32" x 1
- 11/64" x 1
- 3/16" x 1
- 13/64" x 1
- 7/32" x 1
- 15/64" x 1
- 1/4 x 1
- 5/16" x 1
- 3/8" x 1
- 1/2" x 1
Features
- Starts on contact for cleaner holes.
- No spin shanks.
- Tapered web provides greater durability to reduce breaking.
- Includes sizes from 1/16-inch to 1/2-inch in a plastic tough case.
- Titanium Nitride Coating Pilot Point for Longer Life
Specifications
| Height | 8.750 in |
| Length | 8.750 in |
| Width | 1.375 in |
| Weight | 1.100 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | Yes |
| Warranty | NLW |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Bit Diameter | sizes from 1/6-inch to 1/2-inch In |
| Bit Size | 0.5 |
| Bit Type | Split Point |
| Chuck Size | 1/4 in |
| Individual Vs. Set (Syndigo) | SET |
| Quick/Tool Less Changing | Yes |
| Recommended Safety Equipment | Goggles |
| Self Feeding | No |
| Shank Type | Straight |
Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.
Features
- Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
- Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
- Maintains cutting diameter for consistent cutting results
- Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
- Diamond wheels do not shatter or break when dropped
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Tube
Applications
- Cut-Off
Specifications
| Arbor | 5/8", 7/8" |
| Diameter | 7" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 8450 |
| Rim Design | Segmented |
Diablo's premium detail triangle sanding sheets with Hook & Lock™ backing include break-through innovations that improve performance, extend sanding life and increase productivity. Featuring a premium ceramic blend, these discs remove material faster and offer extra-long sanding life than other sanding discs. Clog-SHIELD™, Diablo's own blend of grinding agents, reduces loading thus maximizing productivity. The superior grain bonding system, ENDURA-BOND™, provides Diablo's sanding discs with longer life and extreme durability.
Features
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Premium Hook and Lock backing for a consistent secure connection
- Clog-SHIELD™ reduces pitch build-up and clogging
- ENDURA-BOND™ provides superior grit to backing bond for extreme durability
- Maximum performance in leveling and heavy stock or paint removal
- Optimized for cordless and oscillating tools
Applications
- Removal
Cuts
- Wood
- Plastics
- Metal
Specifications
| Backing | Hook & Lock™ |
| Grit | 80 |
| Grit Blend | Ceramic Blend |
| Grit Description | Coarse |
| Pack Quantity | 10 |
| Size | 3-3/4" |
Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.
Applications
- Cut-Off
Features
- Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
- Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
- Maintains cutting diameter for consistent cutting results
- Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
- Diamond wheels do not shatter or break when dropped
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Tube
Specifications
| Arbor | 5/8", 7/8" |
| Diameter | 6" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 10150 |
| Rim Design | Segmented |
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/2" |
| Length | 6" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
Applications
- Grinding
- Polishing Metal
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
- Delivers up to 10 times faster material removal than a bonded grinding wheel
- Type 29 - Conical design
- Arbor - 5/8"-11 SPEED HUB
Specifications
| Arbor | 5/8"-11 |
| Diameter | 4-1/2" |
| Grit | 60 |
| Grit Description | Coarse |
| Hub Type | 29 |
| Pack Quantity | 1 |
| Max RPM | 12000 |
Features
- 3-in-1 40-Grit sanding plate for removal of grout, mortar and tile adhesive
- Carbide Grit Tip reaches hard to access areas and tight corners
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Cuts
- Grout
- Mortar
- Tile Adhesive
Applications
- Grout and Mortar
Specifications
| Pack Quantity | 1 |
| Tooth Design | Carbide Grit |
| Grout Thickness | 1/8" |
| Interface | Starlock |
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/2" |
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/4" |
Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.
Features
- Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
- Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
- Maintains cutting diameter for consistent cutting results
- Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
- Diamond wheels do not shatter or break when dropped
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Tube
Applications
- Cut-Off
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 12200 |
| Rim Design | Segmented |
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 3/8" |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 2 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
Features
- Assorted pack includes three Phillips drive bits: #1, #2 and #3
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 3 |
| Screwdriver Head | PH Variety |
| Screwdriver Style | Phillips |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long sanding life
- High performance coating that reduces pitch build-up and clogging for maximum productivity
- High strength resin provides superior grit-to-backing bond for extreme durability
- A backing pad is needed in order to attach the fiber disc to a sanding or grinder
- Also use for wood, plastics, and fiberglass
Applications
- Removal
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Grit | 50 |
| Grit Description | Coarse |
| Pack Quantity | 4 |
| Max RPM | 12200 |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 2 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/2 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/4 in. thick wheel designed for offhand stock removal
- High performance bond designed for extremely fast cut while retaining excellent wheel life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Stock Removal
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 12225 |
| Thickness | 1/4 In. |
| Arbor hole | 5/8 In. - 11 |
Save money and cut or remove stock with enhanced efficiency when you wield the Metal A AO Type 27 grinding and cutting wheel. Engineered for cutting at 30- or 90-degree angles, this wheel is great for notching, offhand cut-offs and light side grinding. With a low initial price, high-quality aluminum oxide abrasive, durable bond and thickness of 1/8 inch, this extra-hard wheel strikes the perfect balance between economy and efficiency and is great for inexperienced operators or small jobs where minimizing cost is crucial.
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/8 in. thick wheel designed to be used at a 90 degree angle for offhand cut-off, notching or 30 degree angle for light side grinding
- Durable bond and wheel hardness are designed to provide the best mix of cut rate and life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Cut-Off
- Stock Removal
Specifications
| Diameter | 4-1/2 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 13580 |
| Thickness | 1/8 In. |
| Arbor hole | 5/8 In. - 11 |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/4 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
