S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Features
- Premium ceramic blend for industrial performance and up to 6X longer life versus standard cut-off discs
- Flat disc (Type 1) for straight-on cuts
- Ideal for working in hard-to-access areas
- Fully reinforced for hand-held cutting
- Optimized for cordless and corded angle grinders
Applications
- Cut-Off
Specifications
| Arbor | 1" |
| Diameter | 12" |
| Hub Type | 1/41 |
| Max RPM | 6350 |
| Thickness | 1/8" |
Specifications
| Height | 4.8 IN |
| Length | 5.9 IN |
| Width | 3.625 IN |
| Weight | 1.09 LB |
| Type | ACCESSORIES: SANDING, GRINDING & POLISHING |
| Warranty | None |
| Unit Of Measure | SAE |
Diablo's socket adapters deliver ultimate performance and maximum durability in converting impact and standard drill drivers into socket wrenches. An ultra-strength pin prevents slippage by securely griping sockets when tightening and removing nuts and bolts. These hi-performance adapters are compatible with standard and deep well sockets and allows users to convert impact and drill drivers into square socket wrenches. Torque Resistant Design absorbs torque for less stress on the adapter and the socket. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Extreme durability and impact resistance when tightening and removing screws and fasteners
- Easily convert impact drivers and standard drill drivers into socket wrenches
- Compatible with standard and deep well sockets
- Ultra-strength pin allows for better retention to the socket
- Torque Resistant Design for less stress on the adapter and the socket
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Adapter Size | 1/4" Hex to 3/8" Square |
| Screwdriver Style | Hex |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Specifications
| Diameter | 1-1/8" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Conversion kit includes - (1) back-up pad, (1) M10 x 1.25 locknut, (1) M10 x 1.50 locknut and (2) 50-Grit (Coarse) fiber discs
- Diameter - 4"
- Arbor - M10
Applications
- Converts an angle grinder to a sander
Specifications
| Arbor | M10 |
| Diameter | 4" |
| Pack Quantity | 1 |
| Max RPM | 15250 |
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/4 in. thick wheel designed for offhand stock removal
- High performance bond designed for extremely fast cut while retaining excellent wheel life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Stock Removal
Specifications
| Diameter | 4-1/2 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Thickness | 1/4 In. |
| Max Operating Speed RPM | 13580 |
| Specifications | NORTON METAL |
| Arbor hole | 7/8 In. |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Hole Cutting - woods
- plastics
- metals
Specifications
| Diameter | 2-9/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with 7/8", 20mm and 5/8" arbors
- Includes two bushings: 20mm and 5/8"
- For dry and wet cutting
Applications
- Cutting Masonry
Specifications
| Arbor | 7/8", 20mm, 5/8" |
| Diameter | 5" |
| Kerf | 2.4mm |
| Pack Quantity | 1 |
| Max RPM | 12200 |
| Rim Design | Segmented Turbo |
The Milwaukee® 3/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 3/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
The Milwaukee® retractable starter bit provides accurate centering in less time when cutting tile, stone and glass. You'll cut clean, accurate holes faster when you use the retractable starter bit with Diamond Plus™ threaded hole saws. Diamond Plus™ hole saws deliver the best-in-class performance and the lowest cost per hole on the market with up to 10X longer life. With the highly durable retractable starter bit, no pilot holes are required. Its 1/4 in. size fits standard hole saw arbors. Use it with Diamond Plus™ threaded hole saws to increase your productivity when cutting hard, abrasive materials.
Features
- Increase productivity - no pilot hole required
- Improve accuracy - hard Carbide retractable bit securely marks hole center
- Versatile - fits standard hole saw arbors
- Fits hole saw sizes - 3/16 in. to 1-1/8 in.
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | Carbide Tipped |
| Bit Type | Specialty |
| Length | 2.0 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | Straight |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Diameter | 1-1/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135° split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 3.5 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 2.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Applications
- Drilling clean wood and nail-embedded wood
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Specifications
| Diameter | 1-3/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Features
- Carbide Tipped for long life in highly abrasive materials such as fiber cement and ceramic materials.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- 4" (105mm) bit fits Diablo deep cut hole saws.
Applications
- Drills fiber cement
- ceramic materials.
Cuts
- Fiber Cement
- Ceramics
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Applications
- Drills hardened metals
- cast iron
- stainless steel.
Cuts
- Cast Iron
- Metal
- Stainless Steel
Features
- Cuts hardened metals, cast iron, and stainless steel.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- Elevated performance in high heat applications.
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Features
- Engineered to Last
- High quality ceramic grain allows DEWALT ELITE SERIES DWA8280 Flap Disc to last up to 75% longer than Norton flap disc.
- - Based on DWA8280 (4.5") versus Norton 34872 (4.5") grinding 1/4" 45# steel. Norton is a registered trademarks of Saint-Gobain Abrasives, Inc., which has not endorsed or approved this comparison
- Fast Material Removal
- Ceramic grain and premium backing cloth help provide long life and fast material removal
- Versatile Backing
- Type 29 backing helps with contouring edges
Specifications
| Height | 1.000 in |
| Length | 4.500 in |
| Width | 4.500 in |
| Weight | 0.240 lbs |
| Product Diameter Us | 4.5 in |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | NLW |
| Arbor Size | 7/8 in |
| Blade Diameter | 4 1/2 in In. |
| Grade | Medium |
| Grit | 80 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Mineral | Ceramic Alumina |
| Wheel Diameter | 4.5 in In. |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 3" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's socket adapters deliver ultimate performance and maximum durability in converting impact and standard drill drivers into socket wrenches. An ultra-strength pin prevents slippage by securely griping sockets when tightening and removing nuts and bolts. These hi-performance adapters are compatible with standard and deep well sockets and allows users to convert impact and drill drivers into square socket wrenches. Torque Resistant Design absorbs torque for less stress on the adapter and the socket. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Extreme durability and impact resistance when tightening and removing screws and fasteners
- Easily convert impact drivers and standard drill drivers into socket wrenches
- Compatible with standard and deep well sockets
- Ultra-strength pin allows for better retention to the socket
- Torque Resistant Design for less stress on the adapter and the socket
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Adapter Size | 1/4" Hex to 1/2" Square |
| Screwdriver Style | Hex |
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with DM 7/8" and 5/8" arbors
- Includes one bushing: 5/8"
- For dry and wet cutting
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Applications
- Cutting Masonry
Specifications
| Arbor | DM 7/8", 5/8' |
| Diameter | 6" |
| Kerf | 2.4mm |
| Pack Quantity | 1 |
| Max RPM | 10150 |
| Rim Design | Segmented Turbo |
Features
- 3-IN-1 REINFORCED DESIGN: Grind, notch, and cut a range of materials while keeping productivity high
- 50% LONGER LIFE AND HIGH MATERIAL REMOVAL RATE: Get more done in less time using high-grade grains manufactured with sharp crystalline structure
- BUILT FOR EXTREME VERSATILITY: Fast cutting and light grinding in a variety of stainless and high strength alloys
Specifications
| Height | 0.800 in |
| Length | 4.500 in |
| Width | 4.500 in |
| Weight | 0.268 lbs |
| Product Diameter Us | 4.5 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Battery Required | No |
| Disclaimer | * 56% longer life vs. existing grinding wheels (DWA8904) |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| 7/8 In Diamond Arbor Knockout | No |
| Arbor Size | 5/8 - 11 |
| Blade Diameter | 4 1/2 in In. |
| Blade Material | Ceramic |
| Cuts Into | Metal |
| Grit | Coarse |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Thickness | 0.09375 In |
| Tool Power Output | 360 UWO |
| Wheel Diameter | 4.5 in In. |
The Milwaukee® 7/8 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 7/8" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 3/8 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
Diablo's premium detail triangle sanding sheets with Hook & Lock™ backing include break-through innovations that improve performance, extend sanding life and increase productivity. Featuring a premium ceramic blend, these discs remove material faster and offer extra-long sanding life than other sanding discs. Clog-SHIELD™, Diablo's own blend of grinding agents, reduces loading thus maximizing productivity. The superior grain bonding system, ENDURA-BOND™, provides Diablo's sanding discs with longer life and extreme durability.
Features
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Premium Hook and Lock backing for a consistent secure connection
- Clog-SHIELD™ reduces pitch build-up and clogging
- ENDURA-BOND™ provides superior grit to backing bond for extreme durability
- Maximum performance in leveling and heavy stock or paint removal
- Optimized for cordless and oscillating tools
Applications
- Final Finish
Cuts
- Wood
- Plastics
- Metal
- Solid Surface
Specifications
| Backing | Hook & Lock™ |
| Grit | 220 |
| Grit Blend | Ceramic Blend |
| Grit Description | Ultra Fine |
| Pack Quantity | 10 |
| Size | 3-3/4" |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 120D |
| Weight | 0.0555 lb |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 80D |
| Weight | 0.0695 lb |
Milwaukee® SHOCKWAVE™ Impact Duty™ 30° knuckle™ pivoting bit holder allows users to drive fasteners and drill holes in tight, difficult work areas. Its innovative, compact design locks at a 0° or 30° angle and is designed for use with SHOCKWAVE™ Impact Duty™ 1/4 in. hex accessories. It is rated to handle up to 2,000 in-lbs of torque in impact drivers . The 30° knuckle™ is engineered with Milwaukee® SHOCKWAVE™ Impact Duty™ technology which is built for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE™ Impact Duty™ insert bits feature an innovatively designed geometric shock absorption zone to extend life. 10 SHOCKWAVE™ Impact Duty™ insert bits are included.
Features
- Wear Guard Tip™ protects fit over the life of the bit
- Optimized Shockzone™ absorbs peak torque and prevents breaking
- Custom Alloy76™ Steel engineered for extended life
- Up to 50X Life vs other impact bits
- Laser etched size for easy identification
- Designed for use with drills and impact drivers
Specifications
| Length | 5.0 Inches |
| Material | Heat Treated Steel |
| Bit Capacity | 1 |
| Recommended Safety Equipment | Safety Glasses |
| Minimum Chuck Size Required | 1/4 in |
| Magnetic | Yes |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 180C |
| Weight | 0.0435 lb |
