S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
The DEWALT DWE46170 7-Inch Surface Grinding Dust Shroud aids in dust collection and containment by its Perform & Protect Dust Feature. The spring loaded, hinged door, provides a dust collection solution for both open area grinding and flush edge grinding. This shroud features a Universal Connector that locks onto tool with a twist and click eliminating the need for duct tape to hold the hose onto the shroud and the tool free clamp system is compatible with all DEWALT Large Angle Grinders. This unit delivers a dust shroud that will last in abusive jobsite environments and resist abrasion from debris collected. The flexible yet durable material allows the user to adjust pressure on the grinder to maintain contact on concrete surface without compromising the durability of the shroud. Using this attachment provides improved productivity when efficient dust collection system is used and helps reduce user exposure to harmful silica dust.
Features
- A Perform and Protectdust feature that aids in dust collection and containment
- Spring loaded, hinged door, provides a dust collection solution for both open area grinding and flush edge grinding
- Universal connector locks onto tool with a twist and click eliminating the need for duct tape to hold the hose onto the shroud
- Tool-free clamp system is compatible with all DEWALTlarge angle grinders
- Delivers a dust shroud that will last in abusive jobsite enviornments and resist abrasion from debris collected
- Flexible yet durable material allows the user to adjust pressure on the grinder to maintain contact on concrete surface without compromising the durability of the shroud
- Provides improved productivity when efficient dust collection system/vac is used
- Helps reduce user exposure to harmful Silica Dust
- Fits all DEWALT LAGs but ideally suited for DWE4597 and DWE4557
Specifications
| Height | 5.000 in |
| Length | 11.500 in |
| Width | 9.250 in |
| Weight | 2.770 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | MWC |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Dust collection shroud with flush grinding door allows dust collection for flush edge grinding
- Universal vacuum hose connection locks onto the tool with a twist and click eliminating the use of tape to secure the hose to the shroud
Specifications
| Height | 6.500 in |
| Length | 8.900 in |
| Width | 3.900 in |
| Weight | 1.000 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | 3LW1YS90D |
| Claims Needed | No |
| Compatibility | Dewalt 5 in Grinder |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Milwaukee® 1/2 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 1/2" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.000000 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.500000 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.000000 |
| Single / Double Ended | Single |
Specifications
| Height | 14.72 in |
| Length | 3.88 in |
| Width | 1.5 in |
| Weight | 0.96 lbs |
Applications
- Cutting Masonry
Features
- Taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 2x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with 1" and 20mm
- Includes one bushing: 20mm
- For dry and wet cutting
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Specifications
| Arbor | 1", 20mm |
| Diameter | 14" |
| Kerf | 3.2mm |
| Pack Quantity | 1 |
| Max RPM | 5500 |
| Rim Design | Segmented |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
The Milwaukee® 1-1/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - hardened, one-face 20-Degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - strong enough to use with an impact wrench
- Versatile - one line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 1-1/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Specifications
| Diameter | 1-1/2" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Applications
- Grinding
- Polishing Metal
Features
- Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
- Delivers up to 10 times faster material removal than a bonded grinding wheel
- Type 29 - Conical design
- Arbor - 7/8" (No HUB)
Specifications
| Arbor | 7/8" |
| Diameter | 4-1/2" |
| Grit | 60 |
| Grit Description | Coarse |
| Hub Type | 29 |
| Pack Quantity | 1 |
| Max RPM | 13280 |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Features
- Premium ceramic blend for industrial performance and up to 6X longer life versus standard cut-off discs
- Flat disc (Type 1) for straight-on cuts
- Ideal for working in hard-to-access areas
- Fully reinforced for hand-held cutting
- Optimized for cordless and corded angle grinders
Applications
- Cut-Off
Specifications
| Arbor | 1" |
| Diameter | 14" |
| Hub Type | 1/41 |
| Max RPM | 5450 |
| Thickness | 1/8" |
Diablo's premium random orbital sanding (ROS) discs with Hook & Lock™ backing include break-through innovations that improve performance, extend sanding life and increase productivity. Featuring a premium ceramic blend, these discs remove material faster and offer extra-long sanding life than other sanding discs. Clog-SHIELD™, Diablo's own blend of grinding agents, reduces loading thus maximizing productivity. The superior grain bonding system, ENDURA-BOND™, provides Diablo's sanding discs with longer life and extreme durability.
Features
- Universal hole pattern, a one-size-fits-all design (fits all 5 and 8-hole sanders) for fast and precise alignment
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Premium Hook and Lock backing for a consistent secure connection
- Clog-SHIELD™ reduces pitch build-up and clogging
- Includes (3) 60-Grit/Ultra Coarse discs for fast leveling, shaping, extra heavy removal and stripping
- Includes (3) 80-Grit/Coarse discs for leveling and heavy stock or paint removal
- Includes (3) 100-Grit/Medium discs for moderate stock removal and sanding preparation before paint
- Includes (3) 120-Grit/Fine discs for light stock removal and final sanding preparation before paint
- Includes (3) 220-Grit/Ultra Fine discs for final sanding and surface preparation for stain/varnish
- Optimized for cordless and corded orbital and DA sanders
Applications
- Fast removal
- preparation
- finish
Cuts
- Wood
- Metal
- Plastics
Specifications
| Assorted Pack | Y |
| Backing | Hook & Lock™ |
| Grit | 60/80/100/120/220 |
| Grit Blend | Ceramic Blend |
| Grit Description | Multi-Grade |
| Pack Quantity | 15 |
| Size | 5" |
Features
- High Diamond concentration for long life and aggressive material removal
- Large Grinding segments with heat treated steel bodies which provides increases durability and wheel life
- Dry grinding of concrete and other masonry materials
- Smoothing of uneven surfaces
Specifications
| Height | 8.560 in |
| Length | 6.810 in |
| Width | 1.100 in |
| Weight | 1.100 lbs |
| Product Diameter Us | 0 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Claims Needed | No |
| Arbor Size | 5/8 - 11 |
| Blade Diameter | 5 in In. |
| Grit | Medium |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 8700 RPM Rpm |
| Thickness | 1 In |
| Wet/Dry | Dry |
| Wheel Diameter | 5 in In. |
