S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Item#:
87090
Manufacturer Item:
87090
Your Price:
6.39
Each
Item#:
87080
Manufacturer Item:
87080
Your Price:
6.59
Each
Item#:
87060
Manufacturer Item:
87060
Your Price:
5.39
Each
Item#:
87200
Manufacturer Item:
87200
Your Price:
17.79
Each
Features
- Extend reach in hard to access areas
- Impact Strong™ increases shank stability and durability
- Effortlessly switch between accessories and sizes
- No tools required
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Extension
Specifications
| Length | 12" |
| Shank | 1/4" Hex |
Item#:
DXT1020
Manufacturer Item:
DXT1020
Your Price:
13.89
Each
Item#:
87190
Manufacturer Item:
87190
Your Price:
16.69
Each
Item#:
87170
Manufacturer Item:
87170
Your Price:
14.19
Each
Item#:
87180
Manufacturer Item:
87180
Your Price:
14.48
Each
Item#:
87150
Manufacturer Item:
87150
Your Price:
13.39
Each
Item#:
87160
Manufacturer Item:
87160
Your Price:
13.79
Each
Item#:
87140
Manufacturer Item:
87140
Your Price:
10.58
Each
Item#:
87100
Manufacturer Item:
87100
Your Price:
8.50
Each
Item#:
87110
Manufacturer Item:
87110
Your Price:
8.68
Each
Item#:
87120
Manufacturer Item:
87120
Your Price:
10.19
Each
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 1-3/4 |
| Bore dia. (mm) | 44.45 |
Item#:
63134445042
Manufacturer Item:
63134445042
Your Price:
186.49
Each
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Cuts
- Hardwoods
- Softwoods
- Plywood
Specifications
| Diameter | 1" |
| Length | 6" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
Item#:
DSP2130-P2
Manufacturer Item:
DSP2130-P2
Your Price:
6.89
Each
FEIN-HSS NOVA 11PC 3/4" 2"D
Item#:
F-63134999020
Manufacturer Item:
63134999020
Your Price:
471.99
Each
EX6 USE13/32 BIT
Item#:
53406
Manufacturer Item:
53406
Your Price:
8.99
Each
68960-NM
Item#:
68960-NM
Manufacturer Item:
68960
Your Price:
13.59
Each
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/4" |
| Length | 6" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
Item#:
DSP2150-P2
Manufacturer Item:
DSP2150-P2
Your Price:
8.89
Each
Specifications
| Depth | 0.1875 in. |
| Height | 5.50 in. |
| Width | 0.1875 in. |
| Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
| Packaging Quantity | 1 |
Item#:
MDB18512
Manufacturer Item:
MDB18512
Your Price:
5.89
Each
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- 3-Piece Set Offers 30% in Saving
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
- Set features # of bits: 5/8", 3/4", & 1"
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Pack Quantity | 3 |
| Shank | Hex 7/16" |
Item#:
DAG1900-S3
Manufacturer Item:
DAG1900-S3
Your Price:
53.19
Each
Milwaukee® Big Hawg™ with Carbide teeth is first-to-market in providing extreme life and durability in both nail-embedded wood and abrasive material applications. Utilizing advanced Carbide technology, the new Big Hawg™ with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg™ with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.
Features
- 50X Life in nail embedded wood & abrasive material applications
- Cuts 1000+ more nails
- 5X Faster cuts
- 10X Larger Carbide teeth
- 3 Tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the Carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
Specifications
| Bit Sizes | 2.125, 2.5625, 3.625 |
| Case Included | Yes |
| Bit Type | Hole Saw |
| Pieces | 7.0 |
| Bit Material | Carbide Tipped |
| Bit Diameter | 2.125, 2.5625, 3.625 |
| Hole Saw Type | Multipurpose |
| Kit | Yes |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
Item#:
49-56-9280
Manufacturer Item:
49-56-9280
Your Price:
129.99
Each
Features
- Ultra-sharp tip for fast straight holes in clean wood or stacked lumber
- Black oxide coated flutes for fast chip removal
- 3-Flat Shank eliminates spinning in drill chucks
- Small hole in flute for easily pulling wires and cables through walls, ceilings and floors
- Extended length for access in hard to reach areas
- Maximum performance in cordless and corded drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Clean wood
Specifications
| Diameter | 1/4" |
| Length | 18" |
| Pack Quantity | 1 |
| Shank | 3-Flat |
| Working Length | 3" |
Item#:
DIB1050
Manufacturer Item:
DIB1050
Your Price:
13.89
Each
Features
- Ultra-sharp tip for fast straight holes in clean wood or stacked lumber
- Black oxide coated flutes for fast chip removal
- 3-Flat Shank eliminates spinning in drill chucks
- Small hole in flute for easily pulling wires and cables through walls, ceilings and floors
- Extended length for access in hard to reach areas
- Maximum performance in cordless and corded drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Clean wood
Specifications
| Diameter | 5/16" |
| Length | 18" |
| Pack Quantity | 1 |
| Shank | 3-Flat |
| Working Length | 3" |
Item#:
DIB1060
Manufacturer Item:
DIB1060
Your Price:
13.89
Each
Features
- Ultra-sharp tip for fast straight holes in clean wood or stacked lumber
- Black oxide coated flutes for fast chip removal
- 3-Flat Shank eliminates spinning in drill chucks
- Small hole in flute for easily pulling wires and cables through walls, ceilings and floors
- Extended length for access in hard to reach areas
- Maximum performance in cordless and corded drill drivers
Applications
- Clean wood
Cuts
- Hardwoods
- Softwoods
- Plywood
Specifications
| Diameter | 3/8" |
| Length | 18" |
| Pack Quantity | 1 |
| Shank | 3-Flat |
| Working Length | 3" |
Item#:
DIB1070
Manufacturer Item:
DIB1070
Your Price:
15.19
Each
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Clean wood
Features
- Ultra-sharp tip for fast straight holes in clean wood or stacked lumber
- Black oxide coated flutes for fast chip removal
- 3-Flat Shank eliminates spinning in drill chucks
- Small hole in flute for easily pulling wires and cables through walls, ceilings and floors
- Extended length for access in hard to reach areas
- Maximum performance in cordless and corded drill drivers
Specifications
| Diameter | 1/2" |
| Length | 18" |
| Pack Quantity | 1 |
| Shank | 3-Flat |
| Working Length | 3" |
Item#:
DIB1080
Manufacturer Item:
DIB1080
Your Price:
16.79
Each
1/16-1/2 BY 64THS + A-Z
Item#:
43440
Manufacturer Item:
43440
Your Price:
330.39
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
