S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- Extend reach in hard to access areas
- Impact Strong™ increases shank stability and durability
- Effortlessly switch between accessories and sizes
- No tools required
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Extension
Specifications
| Length | 6" |
| Shank | 1/4" Hex |
The Milwaukee® 1-1/8 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 1-1/8" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
Features
- Durable hardened steel construction
- Fits all hole saws 1-1/4 in. and larger
- Fits all drill chucks 3/8 in. and larger
- Designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile
- Tool-free operation
- Universal, quick change with all brands of hole saws
- No adapters required
Specifications
| Hole Saw Diameter (in) | 3/8 in |
| Hole Saw Material | Bi-Metal |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 8.0 Inches |
| Drilling Depth (in) | 6.0 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 0 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
Features
- Durable hardened steel construction
- Fits all hole saws 1-1/4 in. and larger
- Fits all drill chucks 3/8 in. and larger
- Designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile
- Tool-free operation
- Universal, quick change with all brands of hole saws
- No adapters required
Specifications
| Arbor Design | Hole Saw |
| Backing Plate Diameter (in) | 1.5 |
| Color / Finish | Black |
| Diameter (in) | 0.375 |
| Brand / Model Compatibility | Hole Saws 1-1/4 in and larger |
| Inside Diameter (in) | 0.375 |
| Outside Diameter (in) | 0.375 |
| Length | 8.0 Inches |
| Material | Hardened Steel |
| Minimum Chuck Size Required | 3/8 in |
The Milwaukee® retractable starter bit with large arbor provides accurate centering in less time when cutting tile, stone and glass. You'll cut clean, accurate holes faster when you use the retractable starter bit with Diamond Plus™ threaded hole saws. Diamond Plus™ hole saws deliver the best-in-class performance and the lowest cost per hole on the market with up to 10X longer life. With the highly durable retractable starter bit, no pilot holes are required. Use it with Diamond Plus™ threaded hole saws to increase your productivity when cutting hard, abrasive materials. Large arbor fits hole saws 1-1/4 in. and larger.
Features
- Increase productivity - no pilot hole required
- Improve accuracy - hard Carbide retractable bit securely marks hole center
- Cut clean, accurate holes faster
- Provides accurate centering in less time when cutting tile, stone and glass.
Specifications
| Arbor Design | Hole Saw |
| Backing Plate Diameter (in) | 0.7 |
| Color / Finish | Black |
| Diameter (in) | 0.375 |
| Brand / Model Compatibility | Diamond Plus™ threaded hole saws |
| Inside Diameter (in) | 0.375 |
| Outside Diameter (in) | 0.375 |
| Length | 5.7 Inches |
| Material | Hardened Steel |
| Minimum Chuck Size Required | 3/8 in |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 5/8 |
| Bore dia. (mm) | 15.88 |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 5/8 |
| Bore dia. (mm) | 15.88 |
Diablo's quick-change magnetic drive bit holders deliver ultimate performance and maximum durability in extending the drill's reach in hard to access areas. The time saving tool-free, quick-change feature makes changing out bits more efficient. A high-strength, permanent magnet provides a secure, anti-wobble grip when fastening screws and nuts into a variety of applications. Torque Resistant Design absorbs torque for less stress on the holder. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Easily extend reach of drill in hard to access, confined spaces
- Universal design fits all insert and drive bits
- Quick-change feature makes changing out bits fast and easy with no down time
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the holder and the bit
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Optimized heat treatment process strengthens the adapter for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-3/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
The Diablo 14-Piece Hole Saw Kit features five (10) bi-metal hole saw cups, 1 piece SnapLock PLUS mandrel, 1 pilot bit and 2 adaptor nuts (1/2" and 5/8") for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal hole saws. Unlike anything on the market, Diablo's hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting.
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- 1-size fits all mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- Variable tooth design provides faster cuts with less vibration
- Sizes included: 2-1/8", 2-9/16", 3", 3-5/8", 4-1/8", 4-3/4", 1 Mandril, 2 Pilot Bits, (2) Adaptor Nuts
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 7/8" to 2-9/16" |
| Length | 2-3/8" |
| Pack Quantity | 14 |
| Shank | Diablo Mandrel |
Milwaukee®'s SHOCKWAVE™ Impact Duty™ step bits are engineered to deliver the most durable and fastest holes in the market. Made in the USA with global materials, these step bits have best-in-class performance in impact drivers and the versatility to be used in drills. The 1/4 in. hex shank with an optimized Shockzone™ provide the industry's most durable shank, reducing early shank breaks. A titanium aluminum nitride (TiBone) coating helps deliver 5x longer life, while the Rapid Strike™ tip and dual spiral flute produces 2x faster holes.
Features
- Optimized for impact drivers, drill/driver compatible
- Titanium aluminum nitride (TiBone) coating delivers 5x longer life than competitive impact step bits
- The Rapid Strike Tip™ provides fast and accurate starts
- A dual spiral flute combined with the Rapid Strike Tip™ delivers up to 2x faster holes than competitive impact step bits
- The optimized Shockzone™ reduces early shank breaks
- Made in the USA with global materials
- 12 steps with laser engraving for clear stop on size identification
Specifications
| Bit Diameter | 0.875 |
| Bit Material | Titanium Aluminum Nitride (TiAIN) Coated |
| Bit Type | Step |
| Length | 3.584 Inches |
| Shank Diameter (in) | 0.25 |
| Drilling Depth (in) | 1.949 |
| Minimum Chuck Size Required | 1/4 in |
| Flute Length (in) | 1.949 |
| Single / Double Ended | Single |
| Recommended Safety Equipment | Safety Glasses |
Milwaukee®'s SHOCKWAVE™ Impact Duty™ step bits are engineered to deliver the most durable and fastest holes in the market. Made in the USA with global materials, these step bits have best-in-class performance in impact drivers and the versatility to be used in drills. The 1/4 in. hex shank with an optimized Shockzone™ provide the industry's most durable shank, reducing early shank breaks. A titanium aluminum nitride (TiBone) coating helps deliver 5x longer life, while the Rapid Strike™ tip and dual spiral flute produces 2x faster holes.
Features
- Optimized for impact drivers, drill/driver compatible
- Titanium aluminum nitride (TiBone) coating delivers 5x longer life than competitive impact step bits
- The Rapid Strike Tip™ provides fast and accurate starts
- A dual spiral flute combined with the Rapid Strike Tip™ delivers up to 2x faster holes than competitive impact step bits
- The optimized Shockzone™ reduces early shank breaks
- Made in the USA with global materials
- 6 steps with laser engraving for clear stop on size identification
Specifications
| Bit Diameter | 0.50 |
| Bit Material | Titanium Aluminum Nitride (TiAIN) Coated |
| Bit Type | Step |
| Length | 3.679 Inches |
| Shank Diameter (in) | 0.25 |
| Drilling Depth (in) | 2.044 |
| Minimum Chuck Size Required | 1/4 in |
| Flute Length (in) | 2.044 |
| Single / Double Ended | Single |
| Recommended Safety Equipment | Safety Glasses |
3/4" - 130-AG 1/2 SHK SUPER PRM
Milwaukee® Step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The step drill bit 3-piece set includes bits #1 (48-89-9201), #2 (48-89-9202) and #4 (48-89-9204). Jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Features
- JAM-FREE Performance - Dual-flute design provides greater speed and control
- Up to 2X faster - optimized for cordless drills in high speed
- Rapid Strike™ tip - creates fast, accurate starts and generates less heat
- Up to 4X longer bit life - optimized geometry with black oxide coating to cut faster and produce less heat
- Up to 50% more holes per battery charge - greater user productivity
- Laser-engraved reference marks - easily stop on any hole size
- 3-Flat Secure-Grip™ shanks - reduces bit slippage in the chuck
- Made in the USA
Specifications
| Bit Sizes | 1/8"-1/2", 3/16"-1/2", 3/16"-7/8" |
| Case Included | Yes |
| Bit Type | Step |
| Pieces | 3.000000 |
| Recommended Safety Equipment | Safety Glasses |
| Bit Material | Black Oxide |
| Single / Double Ended | Single |
Diablo's socket adapters deliver ultimate performance and maximum durability in converting impact and standard drill drivers into socket wrenches. An ultra-strength pin prevents slippage by securely griping sockets when tightening and removing nuts and bolts. These hi-performance adapters are compatible with standard and deep well sockets and allows users to convert impact and drill drivers into square socket wrenches. Torque Resistant Design absorbs torque for less stress on the adapter and the socket. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Extreme durability and impact resistance when tightening and removing screws and fasteners
- Easily convert impact drivers and standard drill drivers into socket wrenches
- Compatible with standard and deep well sockets
- Ultra-strength pin allows for better retention to the socket
- Torque Resistant Design for less stress on the adapter and the socket
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Adapter Size | 1/4" Hex to 3/8" Square |
| Screwdriver Style | Hex |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Specifications
| Diameter | 1-1/8" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
