S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Hole Cutting - woods
- plastics
- metals
Specifications
| Diameter | 2-9/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
The Milwaukee® 3/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 3/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
The Milwaukee® retractable starter bit provides accurate centering in less time when cutting tile, stone and glass. You'll cut clean, accurate holes faster when you use the retractable starter bit with Diamond Plus™ threaded hole saws. Diamond Plus™ hole saws deliver the best-in-class performance and the lowest cost per hole on the market with up to 10X longer life. With the highly durable retractable starter bit, no pilot holes are required. Its 1/4 in. size fits standard hole saw arbors. Use it with Diamond Plus™ threaded hole saws to increase your productivity when cutting hard, abrasive materials.
Features
- Increase productivity - no pilot hole required
- Improve accuracy - hard Carbide retractable bit securely marks hole center
- Versatile - fits standard hole saw arbors
- Fits hole saw sizes - 3/16 in. to 1-1/8 in.
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | Carbide Tipped |
| Bit Type | Specialty |
| Length | 2.0 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | Straight |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Diameter | 1-1/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135° split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 3.5 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 2.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Applications
- Drilling clean wood and nail-embedded wood
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Specifications
| Diameter | 1-3/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Features
- Carbide Tipped for long life in highly abrasive materials such as fiber cement and ceramic materials.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- 4" (105mm) bit fits Diablo deep cut hole saws.
Applications
- Drills fiber cement
- ceramic materials.
Cuts
- Fiber Cement
- Ceramics
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Applications
- Drills hardened metals
- cast iron
- stainless steel.
Cuts
- Cast Iron
- Metal
- Stainless Steel
Features
- Cuts hardened metals, cast iron, and stainless steel.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- Elevated performance in high heat applications.
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 3" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's socket adapters deliver ultimate performance and maximum durability in converting impact and standard drill drivers into socket wrenches. An ultra-strength pin prevents slippage by securely griping sockets when tightening and removing nuts and bolts. These hi-performance adapters are compatible with standard and deep well sockets and allows users to convert impact and drill drivers into square socket wrenches. Torque Resistant Design absorbs torque for less stress on the adapter and the socket. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Extreme durability and impact resistance when tightening and removing screws and fasteners
- Easily convert impact drivers and standard drill drivers into socket wrenches
- Compatible with standard and deep well sockets
- Ultra-strength pin allows for better retention to the socket
- Torque Resistant Design for less stress on the adapter and the socket
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Adapter Size | 1/4" Hex to 1/2" Square |
| Screwdriver Style | Hex |
The Milwaukee® 7/8 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 7/8" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 3/8 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
Milwaukee® SHOCKWAVE™ Impact Duty™ 30° knuckle™ pivoting bit holder allows users to drive fasteners and drill holes in tight, difficult work areas. Its innovative, compact design locks at a 0° or 30° angle and is designed for use with SHOCKWAVE™ Impact Duty™ 1/4 in. hex accessories. It is rated to handle up to 2,000 in-lbs of torque in impact drivers . The 30° knuckle™ is engineered with Milwaukee® SHOCKWAVE™ Impact Duty™ technology which is built for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE™ Impact Duty™ insert bits feature an innovatively designed geometric shock absorption zone to extend life. 10 SHOCKWAVE™ Impact Duty™ insert bits are included.
Features
- Wear Guard Tip™ protects fit over the life of the bit
- Optimized Shockzone™ absorbs peak torque and prevents breaking
- Custom Alloy76™ Steel engineered for extended life
- Up to 50X Life vs other impact bits
- Laser etched size for easy identification
- Designed for use with drills and impact drivers
Specifications
| Length | 5.0 Inches |
| Material | Heat Treated Steel |
| Bit Capacity | 1 |
| Recommended Safety Equipment | Safety Glasses |
| Minimum Chuck Size Required | 1/4 in |
| Magnetic | Yes |
The Milwaukee® 1/2 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 1/2" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.000000 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.500000 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.000000 |
| Single / Double Ended | Single |
Specifications
| Height | 14.72 in |
| Length | 3.88 in |
| Width | 1.5 in |
| Weight | 0.96 lbs |
The Milwaukee® SHOCKWAVE™ right angle adapter features an internal optimized Shockzone™ which absorbs peak torque and prevents breaking. The shanks is made from Custom Alloy76™ steel which is engineered for extended life. The hardened gears provide increased torque transfer for added durability. With only a 1.4 in. slim profile, the adapter allows access into the tightest of spaces. The SHOCKWAVE™ right angle adapter is designed for use in both impact drivers and drill driver and works with all 1/4 in. hex shank accessories.
Features
- Optimized internal Shockzone™ absorbs peak torque and prevents breaking
- Custom Alloy76™ steel engineered for extended life
- 1.4 in. slim profile for tight access
- Provides up to 30X life
- Hardened gears allow for increased torque transfer
- Features a magnet to retain bits
- Ergonomic rubber overmold for added comfort during use
- For use with 1/4 in. hex shank accessories
- Designed for use in impact drivers and drill driver
- Includes (1) right angle adapter and (1) 1 in. PH2 driver bit
Specifications
| Shank Diameter | 1/4 in hex |
| Chuck Fitment | Hex |
| Color / Finish | Red/Black |
| Material | Steel, Plastic, Rubber |
| Brand / Model Compatibility | Universal |
| Adjustable Handle Position | No |
| Handle Included | Not Included |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 13/16 |
| Bore dia. (mm) | 20.64 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 13/16 |
| Bore dia. (mm) | 20.64 |
Features
- Titanium Nitride Coating dual flute spiral design provides longer life and better chip removal
- Split point tip increases speed
- Laser engraved numbers increases step visiblity
- 1/4 in. hex shank
- Optimized for impact driver and drill usage
Specifications
| Height | 6 in |
| Length | 5 in |
| Width | 0.88 in |
| Weight | 0.36 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | MWC |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | SET |
| Self Feeding | No |
| Shank Type | Hexagon |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 1-1/16 |
| Bore dia. (mm) | 26.97 |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 1-1/16 |
| Bore dia. (mm) | 26.97 |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 1" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Specifications
| Diameter | 3-5/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Set includes three cups (7/8 in., 1-1/8 in., & 1-3/8 in.), one 7/16" SnapLock™ PLUS mandrel and two plug eject Cobalt pilot bits
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Specifications
| Diameter | 7/8" to 1-3/8" |
| Length | 1/4" |
| Pack Quantity | 6 |
| Shank | Diablo Mandrel |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Our magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
