S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | PH2 |
| Screwdriver Style | Phillips |
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Specifications
| Diameter | 2-11/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Specifications
| Diameter | 7/8" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Features
- Assorted pack includes seven Hex drive bits: 9/64 in., 5/64 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., and 7/64 in.
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 7 |
| Screwdriver Head | HX Variety |
| Screwdriver Style | Hex |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1/2" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 3/4" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 5/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Set includes three cups (7/8 in., 1-1/8 in., & 1-3/8 in.), one 7/16" SnapLock™ PLUS mandrel and two plug eject Cobalt pilot bits
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Specifications
| Diameter | 7/8" to 1-3/8" |
| Length | 1/4" |
| Pack Quantity | 6 |
| Shank | Diablo Mandrel |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Our magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 3/8 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 3/4 |
| Bore dia. (mm) | 19.05 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 3/4 |
| Bore dia. (mm) | 19.05 |
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | PH2 |
| Screwdriver Style | Phillips |
Diablo's new Step Drill Bits bring exclusive technology to the Electrician, Plumber and HVAC contractor with fast, accurate cuts and increased stability in thin metals, PVC other plastic materials. The innovative Split Point Tip design enables a fast, on-point start resulting in increased durability and up to 6X longer life. An automated precision grinding process on each step reduces wear and delivers 2X faster cuts. Multiple hole sizes are made easy with laser etched step markings while increased step heights for common hole sizes makes drilling holes more efficient and faster. Designed with a 1/4" hex shank, these bits are impact ready and can be used with drills and impact drivers.
Features
- Split Point Tip (132°) makes pre-drilling obsolete and stays sharper longer resulting in increased speed, maximum durability and up to 6X longer life
- Automated Precision CNC Grinding Process delivers strict angle tolerances on each step for minimal bit wear and 2X faster cuts in drilling and hole making
- Exclusive design delivers corded and cordless tool efficiency in high-speed mode for up to 75% more holes per battery charge
- 1/4" hex shank allows use with drills and impact drivers
- Optimized dual flute design for jam-free cuts
- Increased step heights for easier drilling of common hole sizes
- Easy to read, laser marked steps for drilling holes of varying sizes
- Ideal for metal (up to 1/8" thickness), PVC and other plastic materials
- Ideal for electrical, plumbing and HVAC contractors
Cuts
- Metal Less Than 1/8"
- Plastics
- Steel
Specifications
| Diameter | 1-1/8" |
| Length | 3-1/32" |
| Shank | 1/4 in. hex |
| Number of Steps | 17 |
13/16" - 130-AG 1/2 SHK SUPER PRM
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 2-1/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Drilling clean wood
Specifications
| Diameter | 1" |
| Length | 4" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Drilling clean wood
Specifications
| Diameter | 7/8" |
| Length | 4" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Specifications
| Diameter | 2-1/2" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 2-1/2" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-9/16" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 5/16" |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 9/16 |
| Bore dia. (mm) | 14.29 |
