S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- 5-pack for up to 20% savings
- Assorted pack includes five magnetic nut setters: 1/4 in., 5/16 in., 3/8 in., 7/16 in., and 1/2 in.
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved for easy identification
- Optimized heat treatment process strengthens the nut setter for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 5 |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Specifications
| Diameter | 2-3/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 1/2" thread Adaptor Nut fits hole saws from 9/16" to 1-3/16" diameters.
- 5/8" thread Adaptor Nut fits hole saws from 1-1/4" to 6" diameters.
- Snap-Lock Plus™ mandrel system allows a quick and easy change with no down time
- Tool free plug ejection for fast material removal
- 1/2" and 5/8" thread adapter nuts convert other hole saw brands to Snap-Lock Plus™
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 5/16 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.3125 |
| Drilling Depth (in) | 8.0 |
| Flute Length (in) | 4.0 |
| Minimum Chuck Size Required | 1/4 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 12.0 |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
| Number of Flutes | 2 |
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 3/8 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.375000 |
| Drilling Depth (in) | 8.000000 |
| Flute Length (in) | 4.000000 |
| Minimum Chuck Size Required | 3/8 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 12.0 |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
| Number of Flutes | 2 |
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 1/4 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.25 |
| Drilling Depth (in) | 8.0 |
| Flute Length (in) | 4.0 |
| Minimum Chuck Size Required | 1/4 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 12.0 |
| Recommended Safety Equipment | Safety Glasses |
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 3/8 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.375 |
| Drilling Depth (in) | 14.0 |
| Flute Length (in) | 4.0 |
| Minimum Chuck Size Required | 3/8 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 18.0 |
| Recommended Safety Equipment | Safety Glasses |
Features
- 1/4 in. round shank
- High-speed steel construction provides strength and durability
- Fits all hole saws up to 1-3/16 in.
- Fits all drill chucks 1/4 in. and larger
Specifications
| Arbor Design | Hole Saw |
| Backing Plate Diameter (in) | 0.250000 |
| Color / Finish | Steel |
| Diameter (in) | 0.25 |
| Brand / Model Compatibility | For use with a 49-56-8000, 49-56-8002, or 49-56-8005 Pilot Bits. For use with Hole Saws from 9/16 inch through 1-3/16 inch |
| Inside Diameter (in) | 0.250000 |
| Outside Diameter (in) | 0.250000 |
| Length | 4.2 Inches |
| Material | High Speed Steel |
| Minimum Chuck Size Required | 1/4 in |
Features
- Drill, countersink and counterbore in one step
- Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
- Replacement tapered bits offered
Includes
- #6,#8, #10
Specifications
| Height | 7.750 IN |
| Length | 3.888 IN |
| Width | 0.750 IN |
| Weight | 0.220 LB |
| Type | DRILL BITS: COUNTER SINK |
| Battery Included | No |
| Prop 65 Generic Warning | Yes |
| Warranty | MWC |
| Piece Count | 3 |
| Primary Material | High Speed Steel |
| Unit Of Measure | SAE |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 15/16 |
| Bore dia. (mm) | 23.81 |
5/8" - 130-AG 1/2 SHK SUPER PRM
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135º split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135-Degrees split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 4.0 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 2.000000 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
The Milwaukee® 9/16 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 9/16" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 3/8 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
The MILWAUKEE® 3-1/8" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA.
Features
- Most Durable Hole Saw. Period.
- New 3.5TPI Tooth Design
- All- Access Slots for Fast Plug Removal
- Thermoset Coating for Faster Cutting
- Limited Lifetime Tooth Break Warranty
- Made in USA
- For use in general purpose applications such as thick/thin metals, aluminum, drywall, plastics, wood, wood with nails
- 1-5/8" cutting depth
Specifications
| Hole Saw Diameter (in) | 3-1/8 in |
| Hole Saw Material | Bi-Metal |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 3.0 Inches |
| Drilling Depth (in) | 3.000000 |
| Pilot Bit Diameter (in) | 0.000000 |
| Minimum Chuck Size Required | 3/8 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety glasses |
The MILWAUKEE® 2-1/2" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA.
Features
- Most Durable Hole Saw. Period.
- New 3.5TPI Tooth Design
- All- Access Slots for Fast Plug Removal
- Thermoset Coating for Faster Cutting
- Limited Lifetime Tooth Break Warranty
- Made in USA
- For use in general purpose applications such as thick/thin metals, aluminum, drywall, plastics, wood, wood with nails
- 1-5/8" cutting depth
Specifications
| Hole Saw Diameter (in) | 2-1/2 in |
| Hole Saw Material | Bi-Metal |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 2.63 Inches |
| Drilling Depth (in) | 2.0 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 3/8 in |
| Teeth per Inch | 6 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 2-1/2" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
