S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
FOR MILD/HARD/STAINLESS
Item#:
DMD964JP1
Manufacturer Item:
DMD964JP1
Your Price:
4.99
Each
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS1250
Manufacturer Item:
DHS1250
Your Price:
11.79
Each
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 3/8 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.375 |
| Drilling Depth (in) | 20.0 |
| Flute Length (in) | 4.0 |
| Minimum Chuck Size Required | 3/8 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 24.0 |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
| Number of Flutes | 2 |
Item#:
48-13-7337
Manufacturer Item:
48-13-7337
Your Price:
25.59
Each
Features
- Aggressive tip geometry provides faster cutting
- Non-stick coated flutes create faster chip ejection and reduces binding
- Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed
- 3-flat shank stops bit from slipping in the chuck
Specifications
| Bit Diameter | 1/4 |
| Bit Material | High Speed Steel |
| Bit Type | Installer |
| Shank Diameter (in) | 0.25 |
| Drilling Depth (in) | 20.0 |
| Flute Length (in) | 4.0 |
| Minimum Chuck Size Required | 1/4 in |
| Application | For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Overall Length (in) | 24.0 |
| Recommended Safety Equipment | Safety Glasses |
Item#:
48-13-7325
Manufacturer Item:
48-13-7325
Your Price:
19.49
Each
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Specifications
| Diameter | 2-1/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS2125CT
Manufacturer Item:
DHS2125CT
Your Price:
28.59
Each
Diablo's new Step Drill Bits bring exclusive technology to the Electrician, Plumber and HVAC contractor with fast, accurate cuts and increased stability in thin metals, PVC other plastic materials. The innovative Split Point Tip design enables a fast, on-point start resulting in increased durability and up to 6X longer life. An automated precision grinding process on each step reduces wear and delivers 2X faster cuts. Multiple hole sizes are made easy with laser etched step markings while increased step heights for common hole sizes makes drilling holes more efficient and faster.
Features
- Split Point Tip (132°) makes pre-drilling obsolete and stays sharper longer resulting in increased speed, maximum durability and up to 6X longer life
- Automated Precision CNC Grinding Process delivers strict angle tolerances on each step for minimal bit wear and 2X faster cuts in drilling and hole making
- Exclusive design delivers corded and cordless tool efficiency in high-speed mode for up to 75% more holes per battery charge
- 3/8" Shank with 3 Flats increases bit stability by preventing shank slippage during tool usage
- Optimized dual flute design for jam-free cuts
- Increased step heights for easier drilling of common hole sizes
- Easy to read, laser marked steps for drilling holes of varying sizes
- Ideal for metal (up to 1/8" thickness), PVC and other plastic materials
- Ideal for electrical, plumbing and HVAC contractors
Cuts
- Metal Less Than 1/8"
- Plastics
- Steel
Specifications
| Diameter | 1-3/8" |
| Length | 2-29/32" |
| Shank | 3/8 in. 3 flats |
| Number of Steps | 15 |
Item#:
DSD1375S15
Manufacturer Item:
DSD1375S15
Your Price:
89.49
Each
Features
- For use with hole saws up to 1-1/2 in.
- One per package
- For use with Milwaukee Arbor adapters
- Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool
Specifications
| Arbor Design | Snap Back |
| Backing Plate Diameter (in) | 0.5 |
| Color / Finish | Black |
| Diameter (in) | 0.5 |
| Brand / Model Compatibility | 1-1/2 in Hole saws |
| Inside Diameter (in) | 0.25 |
| Outside Diameter (in) | 0.5 |
| Length | 0.5 Inches |
| Material | High Speed Steel |
| Minimum Chuck Size Required | 1/2 in |
Item#:
49-56-6560
Manufacturer Item:
49-56-6560
Your Price:
2.37
Each
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS1125
Manufacturer Item:
DHS1125
Your Price:
10.89
Each
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 1-7/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS1875
Manufacturer Item:
DHS1875
Your Price:
14.19
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-9/16" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 3/8" |
Item#:
DNTSL38
Manufacturer Item:
DNTSL38
Your Price:
4.49
Each
FOR MILD/HARD/STAINLESS
Item#:
DMD14JP1
Manufacturer Item:
DMD14JP1
Your Price:
8.99
Each
Item#:
05640
Manufacturer Item:
05640
Your Price:
2.39
Each
Item#:
05620
Manufacturer Item:
05620
Your Price:
3.39
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-9/16" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/2" |
Item#:
DNTSL12
Manufacturer Item:
DNTSL12
Your Price:
4.99
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-9/16" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/4" |
Item#:
DNTSL14
Manufacturer Item:
DNTSL14
Your Price:
4.49
Each
Item#:
05660
Manufacturer Item:
05660
Your Price:
2.99
Each
Item#:
29560
Manufacturer Item:
29560
Your Price:
27.59
Each
FOR MILD/HARD/STAINLESS
Item#:
DMD38JP1
Manufacturer Item:
DMD38JP1
Your Price:
16.99
Each
FOR MILD/HARD/STAINLESS
Item#:
DMD1332JP1
Manufacturer Item:
DMD1332JP1
Your Price:
18.49
Each
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-3/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS1750
Manufacturer Item:
DHS1750
Your Price:
13.59
Each
Item#:
DHS1750DG
Manufacturer Item:
DHS1750DG
Your Price:
39.79
Each
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Specifications
| Diameter | 1-3/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Item#:
DHS1750CT
Manufacturer Item:
DHS1750CT
Your Price:
24.19
Each
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Specifications
| Diameter | 1-3/4" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Item#:
DHS1750CF
Manufacturer Item:
DHS1750CF
Your Price:
57.19
Each
JOBBER .4531
Item#:
05830
Manufacturer Item:
05830
Your Price:
12.69
Each
Features
- Extend reach in hard to access areas
- Ideal for Diablo Snap-Lock Plus Hole Saw Mandrel
- Effortlessly switch between accessories and sizes
- No tools required
Specifications
| Length | 18" |
| Max RPM | 3000 |
| Shank | 7/16" Hex |
Item#:
DHS500XT18
Manufacturer Item:
DHS500XT18
Your Price:
25.99
Each
Features
- Extend reach in hard to access areas
- Ideal for Diablo Snap-Lock Plus Hole Saw Mandrel
- Effortlessly switch between accessories and sizes
- No tools required
Specifications
| Length | 12" |
| Max RPM | 3000 |
| Shank | 7/16" Hex |
Item#:
DHS500XT12
Manufacturer Item:
DHS500XT12
Your Price:
23.69
Each
JOBBER .4844
Item#:
05850
Manufacturer Item:
05850
Your Price:
14.49
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
