S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Hole Cutting - woods
- plastics
- metals
Specifications
| Diameter | 2-9/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
The Milwaukee® 3/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 3/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
The Milwaukee® retractable starter bit provides accurate centering in less time when cutting tile, stone and glass. You'll cut clean, accurate holes faster when you use the retractable starter bit with Diamond Plus™ threaded hole saws. Diamond Plus™ hole saws deliver the best-in-class performance and the lowest cost per hole on the market with up to 10X longer life. With the highly durable retractable starter bit, no pilot holes are required. Its 1/4 in. size fits standard hole saw arbors. Use it with Diamond Plus™ threaded hole saws to increase your productivity when cutting hard, abrasive materials.
Features
- Increase productivity - no pilot hole required
- Improve accuracy - hard Carbide retractable bit securely marks hole center
- Versatile - fits standard hole saw arbors
- Fits hole saw sizes - 3/16 in. to 1-1/8 in.
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | Carbide Tipped |
| Bit Type | Specialty |
| Length | 2.0 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | Straight |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Diameter | 1-1/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135° split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 3.5 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 2.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Applications
- Drilling clean wood and nail-embedded wood
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Specifications
| Diameter | 1-3/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Features
- Carbide Tipped for long life in highly abrasive materials such as fiber cement and ceramic materials.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- 4" (105mm) bit fits Diablo deep cut hole saws.
Applications
- Drills fiber cement
- ceramic materials.
Cuts
- Fiber Cement
- Ceramics
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Applications
- Drills hardened metals
- cast iron
- stainless steel.
Cuts
- Cast Iron
- Metal
- Stainless Steel
Features
- Cuts hardened metals, cast iron, and stainless steel.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- Elevated performance in high heat applications.
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Specifications
| Diameter | 3" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/4" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
The Milwaukee® 1-1/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - hardened, one-face 20-Degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - strong enough to use with an impact wrench
- Versatile - one line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 1-1/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Specifications
| Diameter | 1-1/2" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
