S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Screwdriving
Specifications
| Length | 30.0 mm |
| Weight | 28.39 Lbs. |
| Tip Configuration | Multiple |
| Tip/Opening Size | Multiple |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-VHS100A
Manufacturer Item:
V-VHS100A
Your Price:
59.50
Each
Features
- Tamper resistant TORX screws feature a post in the center of the recess -- this post will only fit into a tamper resistant TORX bit
- TORX is a registered trademark of Acument Intellecutal Properties LLC
Specifications
| Adjustment Screw | No |
| Angled Head | No |
| Fish Tape Puller | No |
| Magnetic | No |
| Overall Length (IN) | 1" |
| Pin Driven | No |
| Primary Trade | Automotive/DIY/Drywaller/Electrician/Framer/General Contractor |
| Product Dim Length (IN) | 1 in |
| Spring Loaded | No |
| Warranty Short | Limited Warranty against product defects for reasonable useful life. Add to long description at end - |
| Wire Crimper | No |
| Wire Cutter | No |
| Wire Stripper | No |
Item#:
92320
Manufacturer Item:
92320
Your Price:
2.27
Each
The Milwaukee® SHOCKWAVE™ lineman's 7/16 in. hex to 1/2 in. square adapter is the most durable adapter on the market and it's pin detent allows for better retention to the socket. The adapter features an optimized Shockzone™ that absorbs peak torque and prevents the adapter from breaking, providing up to 30X life. The adapter is made from Custom Alloy76™ steel, which maximizes it's resistance to wear and shock. The 7/16 in. hex shanks allows the adapter to lock into all 7/16 in. quick connect chucks.
Features
- Pin detent for better retention
- Optimized shock zone geometry absorbs peak torque and prevents breaking
- Custom alloy 76 steel maximizes resistance to wear and shock
- 7/16 in. hex shank
- Fits all 1/2 in. drive accessories
- Designed for use with SHOCKWAVE™ lineman's 3 in. 1 utility sockets
Specifications
| Case Included | No |
| Color / Finish | Black |
| Etched / Stamped Size Identification | No |
| Impact or Standard | Impact |
| Drive Size | Multiple Drive Size Set |
| Drive Size (If Multiple) | 7/16" |
| Length | 1.875 Inches |
| Material | Proprietary Steel |
| Piece Count | 1 |
| ASTM F1505-01 Compliant | Not Tested |
| IEC 60900 Compliant | Not Tested |
| NFPA 70E Compliant | Not Tested |
Item#:
48-32-5100
Manufacturer Item:
48-32-5100
Your Price:
38.99
Each
Specifications
| Height | 0.3 in |
| Length | 1 in |
| Width | 0.3 in |
| Weight | 0.012 lbs |
Item#:
4085-1355
Manufacturer Item:
92330
Your Price:
0.97
Each
Features
- Common in automotive and computer industries
- Ideal for high torque applications
Specifications
| Adjustment Screw | No |
| Angled Head | No |
| Fish Tape Puller | No |
| Magnetic | No |
| Overall Length (IN) | 1" |
| Pin Driven | No |
| Primary Trade | Automotive/Computer/DIY/Drywaller/Electrician/Framer/General Contractor/Mechanic |
| Product Dim Length (IN) | 1 in |
| Spring Loaded | No |
| Warranty Short | Limited Warranty against product defects for reasonable useful life. Add to long description at end - |
| Wire Crimper | No |
| Wire Cutter | No |
| Wire Stripper | No |
Item#:
4085-1365
Manufacturer Item:
92321
Your Price:
0.97
Each
Specifications
| Length | 3-1/2 Inches |
| Weight | 18.31 Lbs. |
| Tip Configuration | Multiple |
| Tip/Opening Size | Multiple |
| Finish | Gunmetal Bronze |
| Material | S2 Modified Steel |
Item#:
V-P21-1DB
Manufacturer Item:
V-P21-1DB
Your Price:
38.99
Each
Features
- Common in automotive and computer industries
- TORX is a registerd trademark of Acument Intellecut
Specifications
| Adjustment Screw | No |
| Angled Head | No |
| Fish Tape Puller | No |
| Magnetic | No |
| Overall Length (IN) | 1-15/16" |
| Pin Driven | No |
| Primary Trade | Automotive/Computer/General Contractor |
| Product Dim Length (IN) | 1-15/16 in |
| Spring Loaded | No |
| Warranty Short | Limited Warranty against product defects for reasonable useful life. Add to long description at end - |
| Wire Crimper | No |
| Wire Cutter | No |
| Wire Stripper | No |
Item#:
93318
Manufacturer Item:
93318
Your Price:
1.99
Each
Specifications
| Height | 0.300 IN |
| Length | 1.000 IN |
| Width | 0.300 IN |
| Weight | 0.010 LB |
| Type | SCREWDRIVERS: BITS |
Item#:
4085-0940
Manufacturer Item:
92005
Your Price:
0.38
Each
Makita Impact GOLD® is new innovation in fastening with a full line of insert bits, bit holders, nutsetters, socket adapters, and more. Impact GOLD® is designed exclusively for use with high-torque impact drivers, and is engineered to last up to 60X longer than standard insert bits. Impact GOLD® Double-Ended Power Bits feature Xtreme Torsion Technology, which allows the torsion section of the bit to flex under load and take pressure off of the bit tip for increased durability in high torque applications. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent "cam-out" and stripping. Makita Impact GOLD® is designed exclusively for use with high-torque impact drivers, and it is ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more.
Features
- One bit with two magnetic tips for quick bit changes
- Xtreme Torsion Technology is engineered to allow the torsion section of the bit to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
- Precision-fit tip engineered to prevent "cam-out" and stripping
- High-quality steel engineered for use with impact drivers
- Lasts up to 60X longer than standard insert bits
- Designed exclusively for high-torque impact drivers
- Ideal for driving screws in a wide variety of heavy-duty fastening applications including deck building, framing and installing plywood subfloor
- Xtreme Torsion Technology is engineered to allow the bit's torsion section to flex under load, taking pressure off bit tip for increased durability
- INNOVATION - Designed exclusively for high-torque impact drivers
- TECHNOLOGY - Xtreme Torsion Technology is engineered to allow the bit's torsion section to flex under load
- PRECISION - Precision-fit tip engineered to prevent "cam-out" and stripping
- DURABILITY - High-quality steel engineered for use with impact drivers
- INCLUDES - 3 ea.Impact GOLD® #2 (2-1/2") Phillips Double-Ended Power Bit
Specifications
| Product Type | Power Bits |
| Bit Fitment | Phillips |
| Tip Size | PH2 |
| Shank Type | 1/4" Hex |
| Overall Length | 2-1/2" |
| Package Quantity | 3 |
| Shipping Weight | .103 lbs. |
Item#:
B-39584
Manufacturer Item:
B-39584
Your Price:
6.99
Each
3-PIECE SET BOGO
Item#:
1907872
Manufacturer Item:
1907872
Your Price:
5.99
Each
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- High strength industrial magnet
- Standard 1/4" shank fits most power tools and chuck adapters
Specifications
| Length | 12 Inches |
| Weight | 8.87 Lbs. |
| Tip Configuration | Std Hex |
| Tip/Opening Size | 5/16 Inches |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-1300MN516
Manufacturer Item:
V-1300MN516
Your Price:
17.99
Each
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- High strength industrial magnet
- Standard 1/4" shank fits most power tools and chuck adapters
Specifications
| Length | 12 Inches |
| Weight | 7.98 Lbs. |
| Tip Configuration | Std Hex |
| Tip/Opening Size | 1/4 Inches |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-1300MN416
Manufacturer Item:
V-1300MN416
Your Price:
12.17
Each
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- High strength industrial magnet
- Standard 1/4" shank fits most power tools and chuck adapters
Specifications
| Length | 12 Inches |
| Weight | 10.05 Lbs. |
| Tip Configuration | Std Hex |
| Tip/Opening Size | 3/8 Inches |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-1300MN616
Manufacturer Item:
V-1300MN616
Your Price:
15.33
Each
Item#:
4085-9996
Manufacturer Item:
92323
Your Price:
2.27
Each
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- High strength industrial magnet
- Standard 1/4" shank fits most power tools and chuck adapters
Specifications
| Length | 6 Inches |
| Weight | 3.85 Lbs. |
| Tip Configuration | Std Hex |
| Tip/Opening Size | 3/8 Inches |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-1150MN616S
Manufacturer Item:
V-1150MN616S
Your Price:
8.69
Each
DOUBLE END PHIL/SQU/TORX
Item#:
B-49622
Manufacturer Item:
B-49622
Your Price:
5.29
Each
MSHL 7/16-4
Item#:
MSHL 7/16-4
Manufacturer Item:
MSHL 7/16-4
Your Price:
9.49
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T30 |
| Screwdriver Style | Torx |
Item#:
DT301P5
Manufacturer Item:
DT301P5
Your Price:
3.99
Each
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- High strength industrial magnet
- Standard 1/4" shank fits most power tools and chuck adapters
Specifications
| Length | 6 Inches |
| Weight | 3.73 Lbs. |
| Tip Configuration | Std Hex |
| Tip/Opening Size | 5/16 Inches |
| Finish | Gunmetal Grey |
| Material | S2 Modified Steel |
Item#:
V-1150MN516S
Manufacturer Item:
V-1150MN516S
Your Price:
8.25
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T30 |
| Screwdriver Style | Torx |
Item#:
DT302P5
Manufacturer Item:
DT302P5
Your Price:
5.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Screwdriver Head | T30 |
| Screwdriver Style | Torx |
Item#:
DT302P1
Manufacturer Item:
DT302P1
Your Price:
1.99
Each
Features
- Assorted pack includes six Torx drive bits: #10, #15, #20, #25, #30 and #40
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 6 |
| Screwdriver Head | T Variety |
| Screwdriver Style | Torx |
Item#:
DTV2-S6
Manufacturer Item:
DTV2-S6
Your Price:
5.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T15 |
| Screwdriver Style | Torx |
Item#:
DT151P5
Manufacturer Item:
DT151P5
Your Price:
3.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T40 |
| Screwdriver Style | Torx |
Item#:
DT401P5
Manufacturer Item:
DT401P5
Your Price:
3.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
| Screwdriver Head | T27 |
| Screwdriver Style | Torx |
Item#:
DT271P2
Manufacturer Item:
DT271P2
Your Price:
1.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T40 |
| Screwdriver Style | Torx |
Item#:
DT402P5
Manufacturer Item:
DT402P5
Your Price:
5.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Screwdriver Head | T15 |
| Screwdriver Style | Torx |
Item#:
DT152P1
Manufacturer Item:
DT152P1
Your Price:
1.99
Each
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | T15 |
| Screwdriver Style | Torx |
Item#:
DT152P5
Manufacturer Item:
DT152P5
Your Price:
5.99
Each
The MILWAUKEE® SHOCKWAVE Impact Duty? 80PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP? delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE? is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits have CUSTOM ALLOY76? for a customized steel and heat treatment per tip type to extend the life of the user's driver bits, providing up to 50X life versus other impact driver bits on the market. The Milwaukee® SHOCKWAVE Impact Duty? driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT?.
Features
- WEAR GUARD TIP? protects fit over the life of the bit
- Optimized SHOCK ZONE? absorbs peak torque and prevents breaking
- CUSTOM ALLOY76? Steel is engineered to extend bit life
- Precise fit, custom machined tip prevents stripping and reduces wobble
- SHOCK ZONES? are optimized in both length and width across all tip types for best performance across tip types
- Laser hardening at the tip creates an outer protective shield for improved wear resistance
- Customized geometry and heat treatment per tip type for best performance across tip types
- Up to 50X Life vs other impact bits
- Laser etched size for easy identification
- Includes SHOCKWAVE Impact Duty? nut drivers with the most durable magnet for longer life in tough applications
- Customizable accessory case is designed for use in PACKOUT?
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Screwdriver |
| Package Contents | (1) Compact Magnetic Bit Holder; (61) 1" Insert Bits: (3) P1, (12) P2, (2) PR2, (3) P3, (2) SQ1, (6) SQ2, (2) SQ3, (2) T10, (2) T15, (5) T20, (8) T25, T27, (2) T30, SL#8, SL#10, Hex 3/32". Hex 7/64", Hex 1/8", Hex 9/64", Hex 5/32", Hex 3/16", Hex 3MM, Hex 4MM, Hex 5MM, (9) 2" Power Bits: (2) P2, P3, (2) SQ2, SQ3, T20, (2) T25, (3) 3-1/2" Power Bits: P2, SQ2, T25, (2) Double Ended Bits: P2/T25, P2/SQ2, (3) 1-7/8" Nut Drivers: 1/4", 5/16", 3/8", (1) 1/4" to 3/8" Socket Adapter |
| Drive Design | Combination |
| Bit Material | Alloy Steel |
| Bit Sizes | 1" Insert Bits: P1, P2, PR2, P3, SQ1, SQ2, SQ3, T10, T15, T20, T25, T27, T30, SL#8, SL#10, Hex 3/32", Hex 7/64", Hex 1/8", Hex 9/64", Hex 5/32", Hex 3/16", Hex 3MM, Hex 4MM, Hex 5MM; 2" Power Bits: P2, P3, SQ2, SQ3, T20, T25; 3-1/2" Power Bits: P2, SQ2, T25; Double Ended Bits: P2/T25, P2/SQ2; 1-7/8" Nut Drivers: 1/4", 5/16", 3/8" |
| Pieces | 80 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Set |
| Minimum Chuck Size Required | 1/4 in |
| Material | Alloy Steel |
| Screwdriver Bit Type | Multi-Use |
Item#:
48-32-4094
Manufacturer Item:
48-32-4094
Your Price:
38.99
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
