S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Sanding, Grinding, Polishing Acy
Features
- Quality aluminum oxide abrasive designed for cutting alloys, steels and ferrous metals
- Ultra-thin reinforced straight wheel for fast, burr-free cutting-off only applications on right angle grinder where minimum material loss is desired
- Durable bond designed for fast cut while retaining excellent wheel life
- Excellent balance and free-cutting action are easy on the operator; good choice for general purpose cutting-off of 400 series stainless, hard carbon steels, and soft carbon steels
- Designed for quick cutting on right angle grinders with proper flanges
Applications
- Cut-Off
Specifications
| Thickness | .040 In. |
| Diameter | 6 In. |
| Grit Size | 36 Grit |
| Abrasive/Mineral | Aluminum Oxide |
| Size Derived | 6 x .045 x 7/8 In. |
| Wheel Type | Type 01/41 |
| Max Operating Speed | 10185 |
| Color / Finish | Black |
Features
- Quality aluminum oxide abrasive designed for cutting alloys, steels and ferrous metals
- Ultra-thin reinforced straight wheel for fast, burr-free cutting-off only applications on right angle grinder where minimum material loss is desired
- Durable bond designed for fast cut while retaining excellent wheel life
- Excellent balance and free-cutting action are easy on the operator; good choice for general purpose cutting-off of 400 series stainless, hard carbon steels, and soft carbon steels
Applications
- Cut-Off
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 01/41 |
| Max Operating Speed RPM | 12225 |
| Arbor hole | 7/8 In. |
| Thickness | .045 In. |
| Specifications | GEMINI RIGHTCUT |
Features
- Quality aluminum oxide abrasive designed for cutting alloys, steels and ferrous metals
- Ultra-thin reinforced straight wheel for fast, burr-free cutting-off only applications on right angle grinder where minimum material loss is desired
- Durable bond designed for fast cut while retaining excellent wheel life
- Excellent balance and free-cutting action are easy on the operator; good choice for general purpose cutting-off of 400 series stainless, hard carbon steels, and soft carbon steels
- Designed for quick cutting on right angle grinders with proper flanges
Applications
- Cut-Off
Specifications
| Thickness | .045 In. |
| Diameter | 4-1/2 In. |
| Grit Size | 36 Grit |
| Abrasive/Mineral | Aluminum Oxide |
| Size Derived | 4-1/2 x .045 x 7/8 In. |
| Wheel Type | Type 01/41 |
| Max Operating Speed | 13580 |
| Color / Finish | Black |
Cut through ductile and cast iron pipe, concrete-lined water pipe, sewer lines and heavy-duty PVC with the special blend of silicon carbide abrasives of this Gemini Ductile C SC Type 01/41 high speed cut-off wheel. Choose a tougher version if you need durability in a high-horsepower machine, or opt for free-cutting action in a lower-horsepower machine. With a patented universal arbor, this wheel fits either a 1-inch or 20-millimeter arbor and offers an economical price compared to a diamond blade.
Features
- A special blend of silicon carbide abrasives designed specifically to cut ductile and cast iron pipe, concrete-lined water pipes, sewer construction and heavy duty pvc
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- Patented Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for the economical price of an abrasive wheel vs. a diamond blade
Applications
- Cut-Off
Specifications
| Diameter | 14 in. |
| Abrasive | Silicon Carbide |
| Wheel type | Type 01/41 |
| Arbor hole | 1 In. / 20 mm |
| Thickness | 1/8 In. |
| Specifications | HIGH SPEED BLADE DUCTILE |
| Max Operating Speed RPM | 4365 |
Cut through brick, block and concrete smoothly with the Gemini Concrete C SC Type 01/41 high speed cut-off wheel, a suitable alternative for diamond bladeS. Silicon carbide abrasive forms a coarse grit with the sharpness necessary to cut through the materials while keeping the wheel economical. Two specification options tailor the wheel to your job. For high-horsepower machines, the wheel lends extra durability to withstand the power. For low-horsepower machines, the wheel provides a free cutting action. Thanks to the patent pending for the universal arbor feature, you can run a single blade on both 1-inch or 20-mm arbor saws.
Features
- Sharp, coarse grit silicon carbide abrasive provides a economical cost solution for cutting brick, block, concrete on high-speed saws
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- The new patent pending Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for alternative to a diamond blade
Applications
- Cut-Off
Specifications
| Diameter | 14 in. |
| Abrasive | Silicon Carbide |
| Wheel type | Type 01/41 |
| Arbor hole | 1 In. / 20 mm |
| Thickness | 1/8 In. |
| Specifications | HIGH SPEED BLADE METAL |
| Max Operating Speed RPM | 5400 |
Applications
- Cleaning
- Finishing
Specifications
| Diameter | 3" |
| Wire Size | .014" |
| Wire Style | Crimped |
| Trim Length | 3/4" |
| Overall Length | 1-1/4 |
| Max RPM | 25000 |
Applications
- Cleaning
- Finishing
Specifications
| Diameter | 1" |
| Wire Size | .020" |
| Wire Style | Crimped |
| Trim Length | 1" |
| Overall Length | 2-5/8 |
| Max RPM | 22000 |
| Weight | 0.25 lb |
Features
- Premium aluminum oxide abrasive for fast initial cut rate
- Heavy, durable X-weight cotton backing is ideal for heat sensitive applications
- Strong butt joint that allows the belt to be run in either direction
- Good open coat coarse grit choice to minimize loading on wood and soft metals - where initial price is the main concern
Applications
- Portable Grinding
- Rust Removal
Specifications
| Width | 4 in. |
| Abrasive | Aluminum Oxide |
| Backing Material | X-wt. Cotton |
| Abrasive Type | Coated |
| Grade | Extra Coarse |
| Grit Size | 40 |
| Length | 24 In. |
Features
- Quality aluminum oxide abrasive at a low initial price
- Ultra-thin depressed center, right angle grinder wheel designed only for cut-off applications where a fast cut and minimum material loss are desired
- Burr-free cutting of on 400 series stainless, hard carbon steels, soft carbon steels
- Good choice when low initial price is needed for small jobs or inexperienced operators
Applications
- Cut-Off
Specifications
| Diameter | 4-1/2 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27/42 |
| Specifications | METAL |
| Arbor hole | 7/8 In. |
| Max Operating Speed RPM | 13580 |
| Thickness | .045 In. |
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/4 in. thick wheel designed for offhand stock removal
- High performance bond designed for extremely fast cut while retaining excellent wheel life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Stock Removal
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 12225 |
| Arbor hole | 7/8 In. |
| Thickness | 1/4 In. |
Features
- Extended Performance flap design lasts 2.5x's longer than std flap discs
- Premium Zirconia cloth provides aggressive grinding action 40% faster than std flap discs
- Proprietary design provides removal rate of a grinding wheel with finish of a fiber resin disc
- Manufactured by DEWALT
Specifications
| Height | 1.200 in |
| Length | 4.500 in |
| Width | 4.500 in |
| Weight | 0.389 lbs |
| Product Diameter Us | 4-1/2 in |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Warranty | 30DLW |
| Arbor Size | 5/8 - 11 |
| Grade | Medium |
| Grit | 80 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Mineral | Zirconia Alumina |
| Wheel Diameter | 4.5 in In. |
Features
- Extended Performance flap design lasts 2.5x's longer than std flap discs
- Premium zirconia cloth prodives aggressive grinding action 40% faster than std flap discs
- Proprietary design provides removal rate of a grinding wheel with finish of a fiber resin disc
Specifications
| Height | 1.100 in |
| Length | 4.500 in |
| Width | 4.500 in |
| Weight | 0.414 lbs |
| Product Diameter Us | 4-1/2 in |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Arbor Size | 5/8 - 11 |
| Grade | Coarse |
| Grit | 40 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Mineral | Zirconia Alumina |
| Wheel Diameter | 4.5 in In. |
Equip your saw for steel work with this Metal A AO Type 01/41 chop saw cut-off wheel. Made with a finer grit abrasive and softer grades, this wheel is the perfect choice for low-horsepower chop saws. Select this wheel when budget is a consideration, for reliable performance with a range of metals. Full fiberglass reinforcing and aluminum oxide abrasive make this wheel ideal for cutting through both soft and hard carbon steels. Use it with 400 series stainless steels, as well as alloys and ferrous metals for well-rounded, consistent performance.
Features
- Quality aluminum oxide abrasive designed for cutting alloys, steels and ferrous metals including 400 series stainless, soft and hard carbon steels
- Designed with finer grit and softer grades, specifically for chop saw machines that typically have lower horsepower
- Constructed with full fiberglass reinforcing
- Good selection when initial price is the primary consideration
Applications
- Cut-Off
Specifications
| Diameter | 14 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 01/41 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 4365 |
| Arbor hole | 1 In. |
| Thickness | 7/64 In. |
Replace wheels less often with Temper Point grains that are built tougher to maintain razor sharpness for up to 50% longer life. Get a longer lasting cutting edge that resists wear-and-tear with enhanced adhesion between the coated grains and resin. Efficiently cut a wide range of metals including carbon steel, stainless, and nickel-based alloys with the wheels thin designs and high-grain concentration. These wheels are exceptionally durable and are built with 2 sheets of fiberglass for optimized strength to help to reduce breakage.
Specifications
| Height | 0.045 in |
| Length | 4.5 in |
| Width | 4.5 in |
| Weight | 0.08 lbs |
| BLADE DIAMETER | 4 1/2 in |
| MAXIMUM SPEED | 13300 RPM |
| THICKNESS | 0.045 in |
| WHEEL DIAMETER | 4.5 in |
Features
- Aggressive Grinding Action - 40 grit grain for heavy duty application.
- Gets The Job Done Fast - Ceramic grain and premium backing cloth help provide fast material removal.
- Versatile Backing - Type 27 backing provides grinding angle of 0-15 degrees.
Specifications
| Height | 1.200 in |
| Length | 4.500 in |
| Width | 4.500 in |
| Weight | 0.443 lbs |
| Product Diameter Us | 4.5 in |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Warranty | NLW |
| Claims Needed | No |
| Arbor Size | 5/8 - 11 |
| Blade Diameter | 4 1/2 in In. |
| Grade | Coarse |
| Grit | 40 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Mineral | Ceramic Alumina |
| Wheel Diameter | 4.5 in In. |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 60D |
| Weight | 0.07400000000000001 lb |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 220C |
| Weight | 0.038 lb |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 150C |
| Weight | 0.043 lb |
Features
- Soft binders combined with fine fibers create the highest gloss of any pad on the market
- Use on machines 1500-2000 rpm on soft to medium finishes
- Engineered with fibers that are durable enough to clean and use again
- Resilient enough to conform to the floor surface for better coverage
Applications
- Professional Cleaning
Specifications
| Diameter | 17 in. |
| Grade | No Grade |
Includes
- 1 Wire Wheel
Features
- Highly specified wire grades are constructed with internal holding plate to ensure consistency and safety
- Constructed for even balance which provides smooth performance
- Wire is 100% inspected to meet demanding quality specifications
Specifications
| Height | 12.204 IN |
| Length | 9.055 IN |
| Width | 1.102 IN |
| Weight | 2.510 LB |
| Type | ACCESSORIES: SANDING, GRINDING & POLISHING |
| Battery Included | No |
| Charger Included (Y/N) | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Diameter | 8 IN |
| Piece Count | 1 |
| Abrasiveness | Coarse |
| Primary Material | Carbon Steel |
| Secondary Material | Carbon |
Features
- High performance aluminum oxide grain for long life and high material removal
- High grain concentration for aggressive grinding action and smoother running wheels
- Proprietary material mix ensures durable long life wheels
- 3 full sheets of fiberglass for durability and safety
Specifications
| Height | 1.000 in |
| Length | 9.000 in |
| Width | 9.000 in |
| Weight | 1.771 lbs |
| Product Diameter Us | 9 IN |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Arbor Size | 5/8 - 11 |
| Grit | Coarse |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 6600 RPM Rpm |
| Wheel Diameter | 9 in In. |
Features
- Adjustable wrench for tightening and loosening center nuts
- Fits all center nuts
Specifications
Save money on your grinding costs on light- to heavy-pressure applications by using the BlueFire ZA ZA Type 01/41 chop saw cut-off wheel. Featuring the latest generation zirconia alumina and premium aluminum oxide abrasive blend, this wheel offers twice the longevity and cut rate of a normal wheel. With a high-performance resin bond, the wheel's construction allows it to outperform its competitors by 20 percent on difficult-to-cut metals such as 400 stainless steel and hard and soft carbon steels.
Features
- Durable, latest generation zirconia alumina and premium aluminum oxide abrasive blend outperforms competitive chop saw zirconia wheels by 20 percent
- Delivers twice the life and cut rate of aluminum oxide wheels on difficult to cut metals: 400 series stainless, soft and hard carbon steels
- High performance resin bond is designed for free cut and long life
- Broad utility from light-to heavy-pressure applications, on a wide range of materials; excellent performance-to-price ratio for lower total grinding costs
Applications
- Cut-Off
Specifications
| Diameter | 14 in. |
| Abrasive | Zirconia Alumina |
| Wheel type | Type 01/41 |
| Specifications | BLUE FIRE LONG LIFE |
| Max Operating Speed RPM | 4365 |
| Arbor hole | 1 In. |
| Thickness | 7/64 In. |
Save money on your grinding costs on light- to heavy-pressure applications by using the BlueFire ZA ZA Type 01/41 chop saw cut-off wheel. Featuring the latest generation zirconia alumina and premium aluminum oxide abrasive blend, this wheel offers twice the longevity and cut rate of a normal wheel. With a high-performance resin bond, the wheel's construction allows it to outperform its competitors by 20 percent on difficult-to-cut metals such as 400 stainless steel and hard and soft carbon steels.
Features
- Durable, latest generation zirconia alumina and premium aluminum oxide abrasive blend outperforms competitive chop saw zirconia wheels by 20 percent
- Delivers twice the life and cut rate of aluminum oxide wheels on difficult to cut metals: 400 series stainless, soft and hard carbon steels
- High performance resin bond is designed for free cut and long life
- Broad utility from light-to heavy-pressure applications, on a wide range of materials; excellent performance-to-price ratio for lower total grinding costs
Applications
- Cut-Off
Specifications
| Diameter | 12 in. |
| Abrasive | Zirconia Alumina |
| Wheel type | Type 01/41 |
| Thickness | 7/64 In. |
| Specifications | BLUE FIRE |
| Arbor hole | 1 In. |
| Max Operating Speed RPM | 5095 |
Let us exceed your expectations with the extended life of this BlueFire ZA ZA Type 27 grinding wheel. Its advanced zirconia-alumina/premium aluminum oxide grit produces a tough face that can last up to two or three times the working life of pure aluminum oxide wheels. This wheel's 0.25-inch central depression gives it just the right shape for a convenient 30-degree angle grind for light-to-heavy duty jobs. Useful across a range of applications, this versatile grinding wheel for your right angle grinder is ideal for working with hard and soft steel alloys, including the 400-series and hard carbon steel mixes.
Features
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
- All wheels are fully speed tested and comply with ANSI standards
Applications
- Stock Removal
Specifications
| Thickness | 1/4 In. |
| Diameter | 9 In. |
| Grit Size | 24 Grit |
| Abrasive/Mineral | Zirconia Alumina |
| Size Derived | 9 x 1/4 x 5/8-11 In. |
| Wheel Type | Type 27 |
| Max Operating Speed | 6600 |
| Color / Finish | Black |
Diablo's premium 7-piece refinishing project pack includes all grits needed to complete your refinishing project: three 80-Grit, two 150-Grit, and two 220-Grit discs. These universal, 12-hole random orbital sanding (ROS) discs feature Hook & Lock™ backing and includes break-through innovations that improve performance, extend sanding life and increase productivity. Featuring a premium ceramic blend, these discs remove material faster than other sanding discs and offer an extra long sanding life. Clog-SHIELD, Diablo's own blend of grinding agents, reduces loading thus maximizing productivity. The superior grit-to-backing bond, ENDURA-BOND, provides Diablo's sanding discs with longer life and extreme durability.
Cuts
- Wood
- Plastics
- Metal
Applications
- Removal
- Finish and Final Finish
Features
- Premium ceramic blend, a superior quality formulation designed for fast material removal and long sanding life
- Unique 12-hole pattern provides a one-size-fits-all design (fits all 5 and 8-hole sanders) for fast and precise alignment
- Premium Hook and Lock backing enables repeated attachment and removal of discs for a consistent secure connection
- For orbital and DA sanders in wood, metal, and plastics
- Clog-SHIELD, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity
Specifications
| Assorted Pack | Y |
| Backing | Hook & Lock™ |
| Grit | 80/150/220 |
| Grit Blend | Ceramic Blend |
| Grit Description | Multi-Grade |
| Hole Pattern | 12 holes |
| Pack Quantity | 7 |
| Size | 5" |
Features
- Premium aluminum oxide abrasive for fast initial cut rate
- Heavy, durable X-weight cotton backing is ideal for heat sensitive applications
- Strong butt joint that allows the belt to be run in either direction
- Good choice for stainless and carbon steel medium grit, intermediate applications when initial price is the primary purchasing factor
Applications
- Portable Grinding
- Rust Removal
Specifications
| Width | 3 in. |
| Abrasive | Aluminum Oxide |
| Backing Material | X-wt. Cotton |
| Abrasive Type | Coated |
| Length | 21 In. |
| Grit Size | 120 |
| Grade | Medium |
Let us exceed your expectations with the extended life of this BlueFire ZA ZA Type 27 grinding wheel. Its advanced zirconia-alumina/premium aluminum oxide grit produces a tough face that can last up to two or three times the working life of pure aluminum oxide wheels. This wheel's 0.25-inch central depression gives it just the right shape for a convenient 30-degree angle grind for light-to-heavy duty jobs. Useful across a range of applications, this versatile grinding wheel for your right angle grinder is ideal for working with hard and soft steel alloys, including the 400-series and hard carbon steel mixes.
Features
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
Applications
- Stock Removal
Specifications
| Diameter | 9 in. |
| Abrasive | Zirconia Alumina |
| Wheel type | Type 27 |
| Specifications | BLUE FIRE |
| Thickness | 1/4 In. |
| Max Operating Speed RPM | 6600 |
| Arbor hole | 5/8 In. - 11 |
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with DM 7/8" and 5/8" arbors
- Includes one bushing: 5/8"
- For dry and wet cutting
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Applications
- Cutting Masonry
Specifications
| Arbor | DM 7/8", 5/8' |
| Diameter | 6" |
| Kerf | 2.4mm |
| Pack Quantity | 1 |
| Max RPM | 10150 |
| Rim Design | Segmented Turbo |
The A290 fine grit paper H&L vacuum disc combines a P-graded aluminum oxide abrasive for outstanding durability and fast cut action with a fiber-reinforced, flexible C-weight latex-saturated backing for strength. The open coat, water-based stearate No-Fil coating and vacuum holes help resist loading to ensure durability. Select the A290 vacuum disc for fine grit dry sanding and finishing applications involving aluminum, composites, fiberglass and wood. For convenient installation and removal, the disc features a hook and loop back.
Features
- P-graded aluminum oxide abrasive provides increased life, fast cut rate, consistent finish
- Unique fiber reinforced, flexible C-weight latex saturated backing increases tear strength while retaining flexibility
- Water-based stearate, No-Fil coating, open coat, and vacuum holes minimize loading and maximize dust collection and life
- Good choice and value for fine grit dry sanding, finishing, and micro-finishing aluminum, fiberglass, composites, hard woods and soft woods; hook and loop back for easy disc mounting and changing
Applications
- Finishing
- Microfinishing
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Attachment | Hook & Loop |
| Backing Material | C-wt. Anti Loading Paper |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 15000 |
| Grit Size | P220 |
| Grade | Very Fine |
| Number of holes | 5 |
