S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Wood Working
Features
- Convenient, magnetic paddle switch for the safest operation possible
- CSA Certified
- Improved dust shroud around blade for greater dust collection
- Innovative single belt design for easier belt tensioning and reduced vibration
- Low profile riving knife included
- Motor reset switch conveniently relocated to the power switch, instead of the motor
- Newly designed arbor lock to change blades quickly and easily
- On board storage for all included accessories
- Quick release riving knife for hassle free riving knife changes
- Redesigned guard for better protection and ease of use
Specifications
| Length | 60.0 |
| Width | 40.0 |
| Height | 43.0 |
| Weight | 235.7 |
| Warranty | 5 Year |
| Arbor Speed (RPM) | 4000 |
| Blade Diameter (In.) | 10 |
| Dust Collection Minimum CFM Required (CFM) | 350 |
| Dust Port Outside Diameter (In.) | 4 |
| Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
| Maximum Depth of Cut (In.) | 3-1/8 |
| Maximum Diameter of Dado (In.) | 8 |
| Maximum Rip Left of Blade (In.) | 13-1/2 |
| Maximum Rip Right of Blade (In.) | 30 |
| Maximum Width of Dado (In.) | 13/16 |
| Miter Gauge Type | T-Slot with Stops |
| Motor Amps | 14.8 |
| Motor Power (HP) | 1-3/4 |
| Motor Voltage (V.) | 115 |
| Prewired Voltage (V.) | 115 |
| Recommended Circuit Size (Amps.) | 20 |
| Style (Type) | Contractor |
| Table Height from Floor (In.) | 34-3/4 |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | 8.81 |
| Table Size (L x W) (In.) | 20 x 27 |
| Table Type | Cast Iron |
Features
- Superior quality replacement parts for all Freud bits
- These parts can be used to replace lost fasteners or to return a bit to its original condition
Applications
- Repairing or rebuilding router bits
Specifications
| Overall Dia. (D) | 3mm |
| Minor Height (m) | 6mm |
Applications
- Repairing or rebuilding router bits
Features
- Superior quality replacement parts for all Freud bits
- These parts can be used to replace lost fasteners or to return a bit to its original condition
Specifications
| Bore Dia. (n) | 3/8" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 3/4" |
| Overall Dia. (D) | 1-1/2" |
| Overall Length (H) | 2-1/2" |
| Number of Cutters | 4 |
| Radius (R) | 1/2" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 5/8" |
| Overall Dia. (D) | 1-3/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 3/8" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Applications
- Soften furniture edges and create decorative beads
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/4" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 5/16" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 5/8" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 1/4" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 3/4" |
| Overall Dia. (D) | 1-5/8" |
| Overall Length (H) | 2-3/4" |
| Number of Cutters | 4 |
| Radius (R) | 1/2" |
| Shank Dia. (A) | 1/2" |
Features
- Freud Perma-SHIELD® Coating
- Bits are compatible with many popular jigs
- Use in CNC, hand-held and table-mounted routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Strong
- attractive joints for drawers and boxes
Specifications
| Angle (d) | 14° |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 1-7/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 3/4" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 2 |
| Radius (R) | 1/8" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Applications
- Soften furniture edges and create decorative beads
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 7/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 2 |
| Radius (R) | 3/16" |
| Shank Dia. (A) | 1/4" |
Applications
- Routing slots and grooves for T-moldings
- spline joints
- tongue
- groove joints
- more
Features
- Requires Freud arbor and bearing, sold separately
- Cuts all composition materials, plywood, hardwood, and softwood
- Use in hand-held and table-mounted portable routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bore Dia. (n) | 5/16" |
| Carbide Height (h) | 1/4" |
| Cut Depth (C) | 9/16" Max |
| Overall Dia. (D) | 2" |
| Number of Cutters | 3 |
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Trimming laminates and routing along patterns
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-13/16" |
| Number of Cutters | 3 |
| Shank Dia. (A) | 1/4" |
