S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Router Bits
Features
- Complete selection of decorative profiles for any project
- Most feature Freud's unique Quadra-Cut design
- Cuts all composition materials, plywood, hardwood, and softwood
- Use on hand-held and table-mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Decorative detail for cabinets
- molding and furniture
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 5/8" |
| Carbide Height (h) | 5/8" |
| Overall Dia. (D) | 1-5/8" |
| Overall Length (H) | 2-5/16" |
| Number of Cutters | 4 |
| Small Radius (R2) | 5/32" |
| Large Radius (R1) | 1/4" |
| Shank Dia. (A) | 1/4" |
Features
- Complete selection of decorative profiles for any project
- Most feature Freud's unique Quadra-Cut design
- Cuts all composition materials, plywood, hardwood, and softwood
- Use on hand-held and table-mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Decorative detail for cabinets
- molding and furniture
Specifications
| Bearing Dia. (B) | 3/8" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/16" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Large Radius (R1) | 5/32" |
| Shank Dia. (A) | 1/4" |
Features
- Complete selection of decorative profiles for any project
- Most feature Freud's unique Quadra-Cut design
- Cuts all composition materials, plywood, hardwood, and softwood
- Use on hand-held and table-mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Decorative detail for cabinets
- molding and furniture
Specifications
| Bearing Dia. (B) | 3/8" |
| Carbide Height (h) | 23/32" |
| Overall Dia. (D) | 1-3/8" |
| Overall Length (H) | 2-3/8" |
| Number of Cutters | 4 |
| Large Radius (R1) | 1/4" |
| Shank Dia. (A) | 1/4" |
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Template work and lettering
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held and table-mounted routers
- Freud Perma-SHIELD® Coating
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-5/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Applications
- Template work
- cutting openings in paneling
- siding
- wall sheathing
- etc.
Features
- Perfect for siding, sheathing & paneling installation
- Use on portable routers for template work
- Freud carbide tips outlast HSS tools
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Carbide Height (h) | 3/4" |
| Overall Dia. (D) | 1/4" |
| Overall Length (H) | 2-1/4" |
| Number of Cutters | 1 |
| Shank Dia. (A) | 1/4" |
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Perfect for signmaking, engraving and decorative detail
- Routs plastics, plywood, hardwood, softwood and composites
- Use on CNC, hand-held and table-mounted portable routers
- Freud Perma-SHIELD® Coating
Applications
- Engraving
- signmaking and decorative accents
Specifications
| Angle (d) | 90° |
| Angle (Included) | 90° |
| Angle (Side) | 45° |
| Carbide Height (h) | 5/16" |
| Overall Dia. (D) | 3/8" |
| Overall Length (H) | 1-3/4" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Applications
- Fluted millwork
- signs and decorative veining
Features
- Makes beautiful engraved flutes in doors, drawer fronts and molding
- Ideal bits for sign lettering
- Routs hardwood, softwood, plywood and composites
- Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
- Freud Premier Solid Carbide
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Carbide Height (h) | 3/8" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 1-13/16" |
| Number of Cutters | 2 |
| Radius (R) | 1/4" |
| Shank Dia. (A) | 1/4" |
Applications
- Trimming laminates and routing along patterns
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 3-1/4" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/2" |
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Trimming laminates and routing along patterns
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-13/16" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Trimming laminates and routing along patterns
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-1/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Freud's big selection of carbide tipped Cove Bits rout clean, smooth edges that are perfect for almost any woodworking project. Also called a "core box" bit, these tools create a classic shape that is popular on many edge applications. Freud bits feature a shear angle that slices wood similar to the way a craftsman uses a hand plane, reducing the chance of tearing or splintering in materials with figured grain. Use in hand-held or table-mounted routers to rout hard or soft wood, plywood or composites.
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Classic shape for edges on furniture and millwork
- Shear angle to produce clean cuts without tearout
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held and table-mounted portable routers
Applications
- Classic decorative edge for furniture and millwork
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/2" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 2 |
| Radius (R) | 1/2" |
| Shank Dia. (A) | 1/4" |
Applications
- Cutting parts
- grooves and deep holes in wood
- plywood and composites
Features
- Fast chip removal with excellent quality and long life
- Use in CNC, hand-held and table-mounted routers
- Black I.C.E. coating for cool cutting edge and superior chip evacuation
- Freud Premier Solid Carbide
- Black I.C.E. + Freud TiCo™ Hi-Density Carbide = 2X increased life and performance vs. standard uncoated bits
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/4" |
| Overall Length (H) | 2-1/2" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Applications
- Decorative and rounded edges
Features
- Creates a beautiful round profile with an inset bead
- Cuts all composition materials, plywood, hardwood, and softwoods
- Use on hand-held and table-mounted portable routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 3/8" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 1/4" |
| Shank Dia. (A) | 1/4" |
Features
- Freud Tico Hi-Density Carbide
- Clean cuts in solid wood, plywood and composites
- Use in CNC, hand-held and table-mounted routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Smooth routing in hardwood
- softwood
- plywood and composites
Specifications
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-5/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/2" |
Features
- Freud Tico Hi-Density Carbide
- Clean cuts in solid wood, plywood and composites
- Use in CNC, hand-held and table-mounted routers
Applications
- Smooth routing in hardwood
- softwood
- plywood and composites
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 5/8" |
| Overall Length (H) | 2-1/2" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/2" |
Applications
- Key holes for hanging plaques and shelves
Features
- The perfect way to hang plaques or shelving with completely hidden fasteners
- Best for solid hard or soft wood, plywood or composites
- Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Carbide Height (h) | 7/16" |
| Overall Dia. (D) | 25/64" |
| Minor Height (m) | 1/4" |
| Overall Length (H) | 1-5/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
| Small Dia. (n) | 3/16" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 3/4" |
| Overall Dia. (D) | 1-1/2" |
| Overall Length (H) | 2-1/2" |
| Number of Cutters | 4 |
| Radius (R) | 1/2" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 5/8" |
| Overall Dia. (D) | 1-3/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 3/8" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Applications
- Soften furniture edges and create decorative beads
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/4" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 5/16" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 5/8" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1-1/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 4 |
| Radius (R) | 1/4" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 3/4" |
| Overall Dia. (D) | 1-5/8" |
| Overall Length (H) | 2-3/4" |
| Number of Cutters | 4 |
| Radius (R) | 1/2" |
| Shank Dia. (A) | 1/2" |
Features
- Freud Perma-SHIELD® Coating
- Bits are compatible with many popular jigs
- Use in CNC, hand-held and table-mounted routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Strong
- attractive joints for drawers and boxes
Specifications
| Angle (d) | 14° |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 1-7/8" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Soften furniture edges and create decorative beads
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 3/4" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 2 |
| Radius (R) | 1/8" |
| Shank Dia. (A) | 1/4" |
Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts, and so many other tasks. Most of these bits also feature Freud's unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8" smaller in diameter to create a beading profile. Use them in CNC, hand-held and table mounted routers to cut hardwood, softwood, plywood and composites.
Applications
- Soften furniture edges and create decorative beads
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts
- Most feature Freud's unique Quadra-Cut design for flawless finishes
- Rout hardwood, softwood, plywood and composites
- Use in CNC, hand-held and table mounted routers
- Freud Perma-SHIELD® Coating
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1/2" |
| Overall Dia. (D) | 7/8" |
| Overall Length (H) | 2-3/16" |
| Number of Cutters | 2 |
| Radius (R) | 3/16" |
| Shank Dia. (A) | 1/4" |
Applications
- Routing slots and grooves for T-moldings
- spline joints
- tongue
- groove joints
- more
Features
- Requires Freud arbor and bearing, sold separately
- Cuts all composition materials, plywood, hardwood, and softwood
- Use in hand-held and table-mounted portable routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bore Dia. (n) | 5/16" |
| Carbide Height (h) | 1/4" |
| Cut Depth (C) | 9/16" Max |
| Overall Dia. (D) | 2" |
| Number of Cutters | 3 |
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Trimming laminates and routing along patterns
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Specifications
| Bearing Dia. (B) | 1/2" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 1/2" |
| Overall Length (H) | 2-13/16" |
| Number of Cutters | 3 |
| Shank Dia. (A) | 1/4" |
Features
- Versatile bits for a host of cabinetmaking & woodworking tasks
- Cuts all composition materials, plywood, hardwood, and softwood
- Use on hand-held and table-mounted routers
- Steel pilots can be removed from bits and used with edge guides for wider rabbets
- Freud Perma-SHIELD® Coating
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Applications
- Cabinetmaking and joinery
Specifications
| Carbide Height (h) | 3/8" |
| Overall Dia. (D) | 1-1/4" |
| Overall Length (H) | 2" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
| Small Dia. (n) | 1/2" |
Features
- The perfect complement to Freud's Slotting Cutters
- Compatible with any slotting cutter with a 5/16" bore
- Use in hand-held or table-mounted routers
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
Applications
- Producing smooth
- precise
- accurate slots
Specifications
| Arbor Dia. (D) | 5/16" |
| Arbor Height (h2) | 25/64" |
| Bore Dia. (n) | 2-3/8" |
| Shank Dia. (A) | 1/4" |
| Stud Height (h1) | 1" |
Cuts
- Veneered Plywood
- Hardwoods
- Softwoods
- Composites
Features
- Cuts all composition materials, plywoods, hardwoods, and softwoods
- Use on hand-held or table-mounted routers
- Freud Perma-SHIELD® Coating
Applications
- Trimming laminates and routing along patterns
Specifications
| Bearing Dia. (B) | 3/8" |
| Carbide Height (h) | 1" |
| Overall Dia. (D) | 3/8" |
| Overall Length (H) | 2-13/16" |
| Number of Cutters | 2 |
| Shank Dia. (A) | 1/4" |
