S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hand Tools
Features
- Satin finish provides corrosion resistance and a slip resistant grip.
- 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
- Anti-Slip Design (ASD) open end.
- Fractional sizes 11/32" and smaller and sizes 1-5/16" and larger do not have the ASD feature.
Specifications
| Height | 1.5 in |
| Length | 25 in |
| Width | 2.7 in |
| Weight | 5.39 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Size (String) | 1 13/16 in |
| Unit Of Measure | SAE |
Features
- Satin finish provides corrosion resistance and a slip resistant grip.
- 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
- Anti-Slip Design (ASD) open end.
- Fractional sizes 11/32" and smaller and sizes 1-5/16" and larger do not have the ASD feature.
Specifications
| Height | 1.300 in |
| Length | 24.700 in |
| Width | 3.600 in |
| Weight | 5.500 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Size (String) | 1 3/4 in |
| Unit Of Measure | SAE |
Features
- Satin finish provides corrosion resistance and a slip resistant grip 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners Anti-Slip Design (ASD) open end Fractional sizes 11/32" and smaller and sizes 1-5/16" and larger do not have the ASD feature Box ends incorporate the TorquePlus system
Specifications
| Height | 1.5 in |
| Length | 22.8 in |
| Width | 3.4 in |
| Weight | 4.53 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Size (String) | 1 11/16 in |
| Unit Of Measure | SAE |
Specifications
| Height | 0.1 IN |
| Length | 2.2 IN |
| Width | 2.2 IN |
| Weight | 0.01 LB |
| Type | SOCKETS: BIT SOCKETS |
| Warranty | LLW |
| Unit Of Measure | SAE |
Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load. The rotational forces are between the drive tool and the socket. Designed with a resin crush gauge to help identify when to replace worn sockets. The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced. Drive tool and socket should line up when in use and should not pinch the crush gauge. Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced. One piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
Features
- Retaining rings are used to help secure sockets onto drive tools.
- They are not intended to bear any load.
- The rotational forces are between the drive tool and the socket.
- Designed with a resin crush gauge to help identify when to replace worn sockets.
Specifications
| Height | 0.200 IN |
| Length | 2.000 IN |
| Width | 2.000 IN |
| Weight | 0.010 LB |
| Type | SOCKETS: BIT SOCKETS |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Unit Of Measure | SAE |
Specifications
| Height | 0.200 IN |
| Length | 1.800 IN |
| Width | 1.800 IN |
| Weight | 0.010 LB |
| Type | SOCKETS |
| Unit Of Measure | SAE |
Specifications
| Height | 0.200 IN |
| Length | 2.400 IN |
| Width | 2.400 IN |
| Weight | 0.010 LB |
| Type | SOCKETS: BIT SOCKETS |
| Unit Of Measure | SAE |
Features
- Front casters with ability to swivel 360°
- Heavy duty air filled back wheels for easy maneuverability
- Side latches allow connectivity for easy and secure stacking
- Telescopic 3-position aluminum handle with integrated long tool storage
- Load capacity of up to 200 lbs
Specifications
| Height | 12.800 in |
| Length | 27.500 in |
| Width | 20.000 in |
| Weight | 19.710 lbs |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Warranty | LLW |
| Claims Needed | No |
| Storage & Organization Type | CARTS |
| Weight Capacity | 220 Lbs |
The MILWAUKEE® 29-Piece SHOCKWAVE Impact Duty™ 1/2 in. Drive SAE & Metric Deep 6 Point Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking makes selecting the right socket every time easy throughout the life of the socket. These Milwaukee sockets are engineered with high strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding, and a dual-hole design and ring groove allow for easy socket attachment and removal. The storage cases are impact resistant and nest together for easy stacking and storage. All SHOCKWAVE Impact Duty™ Sockets backed by a Lifetime Guarantee and meet ASME industry standards.
Features
- Stamped and ink filled diameter markings for wear resistance
- 6-Point design made with forged impact steel for durability in high torque applications backed by our Lifetime Guarantee
- Dual hole design and groove for easier attachment
- Non-slip hex geometry to prevent socket and fastener rounding
- Lifetime Guarantee covers impact sockets and extensions only
- Laser etched part number
- Optimized for use with 1/2" drive impact wrenches, drivers, ratchets, and adapters
- Kit includes 28 Deep SAE and Metric Sockets and 1 Extension. The following sizes are included - 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, 27, and (1) 3" Extension
- Impact resistant case with nestability for easy stacking and storage
Specifications
| Inch Sized Sockets | 1", 5/8", 7/16", 7/8", 3/4", 9/16", 1/2", 11/16", 1-1/4", 1-1/8", 13/16", 15/16" |
| Socket Points | 6 |
| Material | Forged Steel |
| Color / Finish | Black |
| Color Coded | No |
| Drive Size | 1/2 in |
| Etched / Stamped Size Identification | Yes |
| Impact or Standard | Impact |
| Piece Count | 29 |
| Unit of Measurement | Metric and Inch |
| Case Included | Yes |
The MILWAUKEE® 8-Piece SHOCKWAVE Impact Duty™ 3/8 in. Drive SAE Deep 6 Point Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking makes selecting the right socket every time easy throughout the life of the socket. These Milwaukee sockets are engineered with high strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding, and a dual-hole design and ring groove allow for easy socket attachment and removal.The customizable Socket Rail comes with removeable end caps to add or take off socket clips for optimal storage. All SHOCKWAVE Impact Duty™ ™ Sockets backed by a Lifetime Guarantee and meet ASME industry standards.
Features
- Stamped and ink filled diameter markings for wear resistance
- 6-Point design made with forged impact steel for durability in high torque applications backed by our Lifetime Guarantee
- Dual hole design and groove for easier attachment
- Non-slip hex geometry to prevent socket and fastener rounding
- Lifetime Guarantee covers impact sockets and extensions only
- Laser etched part number
- Optimized for use with 1/2" drive impact wrenches, drivers, ratchets, and adapters
- Kit includes 7 Deep SAE Sockets and 1 Socket Adapter. The following sizes are included - 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 3/8" Socket Adapter
- Interchangeable clips for rail customization
Specifications
| Inch Sized Sockets | 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" |
| Socket Points | 6 |
| Material | Forged Steel |
| Color / Finish | Black |
| Color Coded | No |
| Drive Size | 3/8 in |
| Etched / Stamped Size Identification | Yes |
| Impact or Standard | Impact |
| Piece Count | 8 |
| Unit of Measurement | Inch |
| Case Included | No |
The MILWAUKEE® 43-Piece SHOCKWAVE Impact Duty™ 3/8 in. Drive SAE & Metric Deep 6 Point Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking makes selecting the right socket every time easy throughout the life of the socket. These Milwaukee sockets are engineered with high strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding, and a dual-hole design and ring groove allow for easy socket attachment and removal. The storage cases are impact resistant and nest together for easy stacking and storage. All SHOCKWAVE Impact Duty™ ™ Sockets backed by a Lifetime Guarantee and meet ASME industry standards.
Features
- Stamped and ink filled diameter markings for wear resistance
- 6-Point design made with forged impact steel for durability in high torque applications backed by our Lifetime Guarantee
- Dual hole design and groove for easier attachment
- Non-slip hex geometry to prevent socket and fastener rounding
- Lifetime Guarantee covers impact sockets and extensions only
- Laser etched part number
- Optimized for use with 3/8" drive impact wrenches, drivers, ratchets, and adapters
- Kit includes 40 Standard and Deep Metric and SAE Sockets and 3 Accessories. The following sizes are included in Standard and Deep - 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and (1) 3" Extension, (1) Universal Joint, and (1) 3/8" Adapter
- Impact resistant case with nestability for easy stacking and storage
Specifications
| Inch Sized Sockets | 3/8", 5/16", 5/8", 7/16", 3/4", 9/16", 1/2", 11/16" |
| Socket Points | 6 |
| Material | Forged Steel |
| Color / Finish | Black |
| Color Coded | No |
| Drive Size | 3/8 in |
| Etched / Stamped Size Identification | Yes |
| Impact or Standard | Impact |
| Piece Count | 43 |
| Unit of Measurement | Metric and Inch |
| Case Included | Yes |
Features
- 5-in-1 Impact Socket features three square socket sizes - 3/4-Inch, 1-Inch and 1-1/8-Inch, and small and large alignment slots
- Alignment slot to tighten and loosen most pole hardware
- 7/16-Inch hex quick-change adapter included
- Fine tuned ball tip provides improved retention, minimizing drops
- 13/16-Inch diameter, 6-Inch (15.2 cm) long hollow shaft allows use on long threaded bolts
- Engineered for use with impact drivers
- Color coded with double lines to identify size and slotted feature
- Replacement adapter is available (Cat. No. NRHDA)
- Large and Small Slots; Easily Switch Between Sizes Without Removing Your Gloves
Specifications
| Overall Width | 1.75" (4.5 cm) |
| Overall Height | 1.75" (4.5 cm) |
| Overall Length | 7.75" (19.7 cm) |
| Socket Size | 3/4", 1", 1-1/8" |
| Number of Points | 4 |
| Material | Steel |
| Drive Size | 7/16" Hex |
| Type | Impact Socket |
| Application | Distribution - 3/4", 1", 1-1/8" |
| Standard | ASME B107.2 |
| Height | 2.0000 in |
| Width | 3.0000 in |
| Depth | 7.7500 in |
| Weight | 2.0000 lbs |
Features
- Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces
- Forged heat-treated alloy steel for light weight maximum strength and long life
- High polish chrome finish is rust resistant
- Precision-machined jaws are individually chosen and assembled by hand for smooth operation
- Contoured handles for comfortable use
- Knurl turns smoothly for easy operation
- Rail is ground for precision fit
Specifications
| Overall Length | 10.125" (25.7 cm) |
| Weight | 15.7 oz (440 g) |
| Handle Finish | High-Polish Chrome |
| Jaw Capacity | 1.3125" (3.3 cm) |
| Handle Color | Chrome |
| Material | Alloy Steel |
| Accessories | TT1, TT2 |
| Item Height | 0.4500 in |
| Item Width | 2.4750 in |
| Item Depth | 10.1250 in |
| Item Weight | 0.9800 lbs |
Features
- Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces
- Forged heat-treated alloy steel for light weight maximum strength and long life
- High polish chrome finish is rust resistant
- Precision-machined jaws are individually chosen and assembled by hand for smooth operation
- Contoured handles for comfortable use
- Knurl turns smoothly for easy operation
- Rail is ground for precision fit
Specifications
| Jaw Capacity | 1.5" (3.8 cm) |
| Overall Length | 12.25" (31.1 cm) |
| Weight | 1.7 lb (0.8 kg) |
| Handle Finish | High-Polish Chrome |
| Material | Alloy Steel |
| Handle Color | Chrome |
| Accessories | TT1, TT2 |
| Item Height | 0.6750 in |
| Item Width | 2.7000 in |
| Item Depth | 12.2500 in |
| Item Weight | 1.6500 lbs |
Features
- Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces
- Forged heat-treated alloy steel for maximum strength and light weight
- High polish chrome finish for rust resistance
- Precision-machined jaws are individually chosen and assembled by hand for smooth operation
- Contoured handles for comfortable use
- Knurl turns smoothly for easy operation
- Rail is ground for precision fit
Specifications
| Handle Color | Chrome |
| Jaw Capacity | 0.94" (2.4 cm) |
| Handle Finish | High-Polish Chrome |
| Weight | 4.6 oz (130 kg) |
| Application | General Purpose |
| Material | Alloy Steel |
| Overall Length | 6.375" (16.2 cm) |
| Accessories | TT1, TT2 |
| Item Height | 0.3420 in |
| Item Width | 1.8000 in |
| Item Depth | 6.3750 in |
| Item Weight | 0.2900 lbs |
Features
- Access hard-to-reach fasteners in tight spaces
- Ball detent securely holds socket to the adapter
- Chrome finish to resist rust and corrosion
- Fits 1/4 " drive tools
- Lifetime guarantee
Specifications
| Case Included | No |
| Color / Finish | Chrome |
| Etched / Stamped Size Identification | No |
| Impact or Standard | Standard |
| Length | 2.13 Inches |
| Material | Steel |
| Piece Count | 1 |
| Set / Individual | Individual |
| Female Drive Side Size (1) | 1/4" |
| Male Drive Side Size (1) | 1/4" |
| Socket & Ratchet Adapter Type | Universal Joint |
Features
- Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws, and easily reverses for tightening or loosening screws
- Includes 3/8-Inch (10 mm)-square-drive fitting adapter for 5/16-Inch hex bits and four assorted hex screwdriver bits (5/16-Inch (8 mm) and 1/2-Inch (13 mm) regular slotted tip, #2 and # 4 Phillips-tip)
- Can also be used on 3/8-Inch (10 mm) square-drive impact sockets
- Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 foot-pounds of shock torque
- Made in USA
- Constructed of high-grade alloy steel that has been heat treated for added strength
- Reclosable, seal-tight vinyl pouch with hang-up grommet
Specifications
| Weight | 2.2 lb (1.0 kg) |
| Included | Impact Driver; 4 Hex Bits; 3/8" (1 cm) Square Drive Fitting Adapter |
| Phillips Bits | #2, #4 |
| Nut Driver Sizes | 5/16" |
| Slotted Bits | 5/16" (7.9 mm), 1/2" (12.7 mm) |
| Overall Length | 10.6" (26.9 cm) |
| Replacement Parts | 70229 |
| Item Height | 2.5000 in |
| Item Width | 4.3000 in |
| Item Depth | 10.6000 in |
| Item Weight | 2.1500 lbs |
Features
- Lanyard Hole - Safely secure hammer to wrist or stationary object
- No-Slip Grip - Vulcanized rubber handle for secure grip while striking
- Trademark Green Head - Hi-Vis, drop forged 46 HRC steel head endures the most demanding applications
- Unbreakable® Handle Technology: Steel core eliminates breaking during overstrikes
Specifications
| Length | 36.0 |
| Width | 7.28 |
| Height | 2.78 |
| Weight | 17.8 |
| Warranty | Lifetime |
| Face Diameter (In.) | 2-1/4 |
| Handle Length (In.) | 36 |
| Head Material | Drop Forged Steel |
| Head Weight (Lbs.) | 12 |
| Type | Sledge Hammer |
Features
- Grime guard™ industry's first blade wiper
- Heavy duty metal frame
- 3 -1 Reinforced planetary gears
- Nylon coated steel blade
- 100 ft. folding hook
Specifications
| Blade Material | Steel |
| Case Design | Closed Reel |
| Gear Ratio | 3:1 |
| Measuring Format | SAE |
| Tape Length (ft) | 100.0 |
| Tape Width (in) | 0.375 |
| Belt Clip | No |
| Color / Finish | Black/Red |
| Housing Material | Plastic |
| Lockable | No |
The Milwaukee 6 in. measuring wheel was designed for extreme durability, increased ergonomics, and productivity. Constructed of reinforced aluminum frames and reinforced folding joints, the Milwaukee measuring wheels are able to withstand the toughest jobsite conditions. Durable locking pivot points help quickly fold the units for transportation and storage. The pistol grip handles, designed to provide similar ergonomics to that of a power tool handle, fitting the hand of the user better than other wheels on the market. These handles feature a top brake function that can be used to 'lock' the wheel and the reading, increasing accuracy. The Milwaukee 6 in. measuring wheel can be easily folded down to a compact 18 in. which allows for easier transport and versatility.
Features
- Top break function
- Reinforced locking pivot point
- Zero point indicator
- Ergonomic handle
- Locks when folded
- 0 to 10,000 ft.
Specifications
| Measuring Tool Type | Measuring Wheel |
| Color / Finish | Red/Black |
| Material | Aluminum |
| Measuring Format | SAE |
| SAE Inch Reading | Inch-by-inch (1/12th foot) |
| Measuring Range | 0-10,000 Ft. |
| Length | 19.0 Inches |
| Width | 8.0 Inches |
| Lockable | Yes |
