S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsTake on challenging concrete applications with the 1-3/4 in. SDS MAX Combination Rotary Hammer that delivers up to 10.5 Joules of impact energy. Featuring durable German-engineered mechanisms and constant speed electronics that allow the tool to maintain speed under load, this midweight tool is ideal for suited for high-performance, horizontal serial drilling for #5 - #8 rebar, dry coring up to 4 in., chipping in any upper to lower wall and bushing applications. As a Tag Ready product, you can seamlessly track, manage and control the 1-3/4 in. SDS MAX Combination Rotary Hammer in the TOOL CONNECT system. For user convenience, this product is packaged with a kit box for jobsite portability.
Features
- 10.5 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- E-CLUTCH system protects the user in bind-up situations by stopping the rotation of the bit.
- The SHOCKS Active Vibration Control system reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- 7-position, variable-speed control for precision hole placement, chipping, and drilling with Atomic Undercut bits.
- Constant-speed electronics allow the tool to maintain speed under load.
- Tag Ready so users and companies can attach the DEWALT Tag and track its location virtually anywhere via the Tool Connect app.
- The midweight design makes it ideally suited for high-performance, horizontal serial drilling for #5 - #8 rebar, dry coring up to 4 in., chipping in any upper to lower wall, and bushing applications.
Specifications
Height | 20.200 in |
Length | 25.300 in |
Width | 6.700 in |
Weight | 27.900 lbs |
Power Source | Electric |
Cordless Vs. Corded | Corded |
Voltage | 120 V V |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Amperage | 14 |
Cord Length | 8 Ft |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
Claims Needed | No |
Case Type | Case |
Chuck Capacity | 1-3/4" |
Chuck Size | SDS-Max |
Chuck Type | SDS-Max |
Handle Type | D-Ring |
Housing Material | Plastic |
Impact Energy | 10.5 Joules |
Impacts / Blows / Blasts Per Min | 2900 |
Individual Vs. Set (Syndigo) | SET |
Keyless/Keyed | Keyless |
Maximum Speed | 380 RPM Rpm |
Reversible | Yes |
Side Handle Included | Yes |
Thin Wall Bit Capactiy | No |
Variable Speed | Yes |
Features
- STRONG PERFORMANCE: Up to 250 ft-lbs of max tightening torque and 400 ft-lbs of max breakaway torque
- ACCESS HARD-TO-REACH WORKSPACES with its compact size
- QUICKLY CHANGE SOCKETS: Hog ring anvil for rapid, secure socket changes
- BRIGHTEN DARK WORK AREAS with on-board LED ring
Specifications
Height | 9.173 in |
Length | 5.866 in |
Width | 3.465 in |
Weight | 2.685 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Charge Time | 0.58 |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Anvil Type | Hog ring |
App Compatibility | No |
Bare Tool | Yes |
Bluetooth Compatibility | No |
Case Type | No Case Included |
Drive Size | 1/2 in square |
Forward And Reverse Switch Included | No |
Housing Material | Plastic |
Impacts / Blows / Blasts Per Min | 3150 |
Individual Vs. Set (Syndigo) | SET |
Kit | No |
Maximum Speed | 2850 RPM Rpm |
Maximum Torque Ft/Lbs. | 400 |
Minimum Torque | 250 Ft-Lbs |
Variable Speed | Yes |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
The 20V MAX 21 degree Plastic Collated Cordless Framing Nailer delivers the performance demanded by pros to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4 in. and 0.148 in. diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
Features
- Dual-Speed Motor Optimized To Drive A Wide Range Of Fasteners For Versatility
- Tool-Free Selector Switch For Sequential Or Bump-Fire Modes
- Tool-Free Depth Adjustment For Precise Nail Placement
- High-Strength Aluminum Magazine With Easy-To-Operate Pusher Latch
- Stall Release Lever To Reset Driver Blade In The Event Of A Jam
- Adjustable Rafter Hook
- Easy Access To The Nosepiece For Removing Jammed Nails
- Dry Fire Lock Out Prevents Tool From Firing When Nails Are Low
- 21° Magazine Holds Up To 49 Plastic Collated Nails
- Capable Of Driving 0.0148 In. Diameter Nail Into Dense Lumber
Specifications
Height | 8.500 in |
Length | 18.070 in |
Width | 17.850 in |
Weight | 15.200 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 1.4 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 4 Ah Ah |
Watt Hours | 80 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | ANSI Safety Listing | CSA Certified | UL Listed |
Claims Needed | Yes |
Hazmat Code | A1 |
Adjustable Depth | Yes (Tools Not Required) |
Case Type | Soft |
Engine | Brushless |
Fastener Format | Strip |
Fastener Length | 3.25 |
Firing Mode | Full Sequential |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | SET |
Integrated Rafter Hook | Yes |
Integrated Work Light | Not Featured |
Loading Type | Coil |
Magazine Angle | 21 |
Magazine Capacity | 49 |
Maximum Fastener Size | 3-1/4 in |
Minimum Fastener Size | 2 in |
Multi-Purpose | Single Purpose |
Nail Gauge | NA |
Nail Gun Angle | 21 degree |
Nailer Features | No Features |
Nails Per Charge | 845 |
Range | 2" x .113" 3-1/4" x .148" |
Uncertainty K1 (Vibration) | 1.5 |
Features
- Brushless motor requires no brush changes.
- Brake stops wheel in 2 seconds or less on average
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off.
- Features E-Switch Protection- When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool.
- Two stage trigger requires two actions to activate tool.
Specifications
Height | 4.882 in |
Length | 12.900 in |
Width | 6.299 in |
Weight | 4.600 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Charge Time | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD/Transition |
Hazmat Code | A1 |
Adjustable Handle | Yes |
App Compatibility | No |
Arbor Size | 5/8 in |
Bare Tool | Yes |
Bluetooth Compatibility | No |
Case Type | N/A (no case) |
Design Type | Angle |
Electronic Speed Control | No |
Engine | Brushless |
Gearing Type | Single speed |
Grinding Wheel Included | No |
Handle Type | 2-position side handle |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Speed | 9000 RPM Rpm |
Motor Bearings | Metal |
Overload Protection | Yes |
Replaceable Brushes | No |
Side Handle Included | Yes |
Spindle Lock | Yes |
Switch Type | Paddle |
Variable Speed | No |
Wheel Diameter | 4.5 in In. |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
Features
- Up to 54% more power when paired with FLEXVOLTbatteries
- Kickback Brake engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs.
- E-CLUTCHshuts down the motor in under a tenth of a second when a pinch/stall is detected
- Compatible with all DEWALT 20V MAX and FLEXVOLTBatteries
- E-Switch Protectionrequires the trigger switch to be cycled (turned off and on) in the event of a power outage or other unexpected shutdowns to restart
- Tool ConnectChip Ready: Chip pocket accepts Tool ConnectChip DCE042 and connects with Tool ConnectSite Manager app for easy asset management on the jobsite. (DCE042 sold separately)
Specifications
Height | 4.900 in |
Length | 13.110 in |
Width | 6.200 in |
Weight | 4.650 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** DCG416B using a DCB606 FLEXVOLT(R) battery vs. DCB205 DEWALT 20V MAX* battery (batteries sold separately) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Arbor Size | 5/8 -11 UNC |
Bare Tool | Yes |
Case Type | N/A (no case) |
Design Type | Angle |
Electronic Speed Control | No |
Engine | Brushless |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Speed | 9000 RPM Rpm |
Side Handle Included | Yes |
Switch Type | Paddle |
Variable Speed | No |
Wheel Diameter | 4.5 in In. |
This 20V MAX XR 5-inch Brushless Cordless Random Orbital Sander comes with a 2.0Ah battery and provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the wood sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for quick, easy paper changing.
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable-speed control from 8,000 to 12,000 OPM to match the speed to the application
- Low-profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing
- Dust-sealed switch to protect against dust ingestion for long switch life.
- Texturized rubber overmold grip for comfortable sanding
- One-handed locking dust bag
- Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors (sold separately)
- To attach dust port to other vacuum systems with 1-1/4 in. hoses, use DWV9000 Universal Quick Connector (sold separately).
- PSA replacement pad available as service part number N373679 (sold separately)
Specifications
Height | 5.500 in |
Length | 10.250 in |
Width | 9.000 in |
Weight | 4.750 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 0.8 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 2 Ah Ah |
Watt Hours | 40 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 60 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD |
Hazmat Code | A1 |
Case Type | Bag |
Dust Collection | Yes |
Dust Collection Component | Bag |
Electronic Speed Control | No |
Individual Vs. Set (Syndigo) | SET |
Maximum Load | 100 Lbs |
Maximum Speed | 12000 RPM Rpm |
Orbital Action | Yes |
Pad Size | 5 in |
Sander Style | Random Orbit |
Single Or Multi Plane | Single |
Variable Speed | Yes |
Features
- 8,000 rpm motor provides high power for cutting and grinding applications
- Quick-Change Wheel Release allows tool free wheel removal without need for a wrench
- Tool-free guard allows for quick and easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle offers greater control, comfort and versatility
Specifications
Height | 4.700 in |
Length | 13.501 in |
Width | 5.800 in |
Weight | 4.750 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushed |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Arbor Size | 5/8 in |
Bare Tool | Yes |
Case Type | N/A (no case) |
Design Type | Cut-Off |
Electronic Speed Control | No |
Engine | Brushed |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Kit | No |
Maximum Speed | 8000 RPM Rpm |
Side Handle Included | Yes |
Switch Type | Trigger |
Variable Speed | No |
Wheel Diameter | 4.5 in In. |
Features
- Up to 500 ft-lbs of max torque
- Compact design of 8-13/16" in length
- Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
- Quick release 7/16" chuck and lift hook
- LED light with 20-second delay for increased visibility
Specifications
Height | 9.800 in |
Length | 10.900 in |
Width | 4.200 in |
Weight | 7.000 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
App Compatibility | No |
Bare Tool | Yes |
Bluetooth Compatibility | No |
Chuck Size | 7/16 in |
Forward And Reverse Switch Included | Yes |
Impacts / Blows / Blasts Per Min | 2400 |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Speed | 1900 RPM Rpm |
Maximum Torque Ft/Lbs. | 500 |
Torque | 500 Lb-In |
Variable Speed | Yes |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Inline magazine provides easy use in multiple orientations and in tight spaces
Specifications
Height | 5.870 in |
Length | 18.380 in |
Width | 13.562 in |
Weight | 10.500 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 0.8 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 2 Ah Ah |
Watt Hours | 40 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 60 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-IonBatt <101 WH |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Claims Needed | Yes |
Hazmat Code | A1 |
Adjustable Depth | Yes (Tools Not Required) |
Case Type | N/A (no case) |
Engine | Brushless |
Fastener Format | Strip |
Fastener Length | 2.5 |
Firing Mode | Full Sequential |
Gauge | 15 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | SET |
Integrated Work Light | Yes |
Loading Type | Coil |
Maximum Fastener Size | 2-1/2 in |
Maximum Length | 2.5 In |
Minimum Fastener Size | 1-1/4 in |
Minimum Length | 1.25 In |
Multi-Purpose | Single Purpose |
Nail Gauge | 15 gauge |
Nail Gun Angle | 34 degree |
Nails Per Charge | 1200 |
Range | 15 gauge |
This 12V MAX Cordless Reciprocating Saw is compact and performance packed. At only 3.04 lbs. and 12.12 in. front to back, it is optimized for one-handed use across a wide range of cutting applications. The brushless motor delivers up to 2,800 spm combined with a 5/8 in. stroke length for fast and efficient cutting. This saw is equipped with an LED for increased visibility along with a variable-speed trigger for added control. This kit includes a DCS312 Reciprocating Saw, 12V MAX 3.0Ah battery, two blades, charger, and tool bag.
Features
- Lightweight and compact for ultimate portability
- Ergonomics optimized for one-handed use
- Brushless motor for enhanced performance and extended life
- LED to help illuminate dark workspaces
- Tool-free blade release allows for quick and easy blade changes
- Variable-speed trigger provides user with improved speed control
Specifications
Height | 10.687 in |
Length | 16.187 in |
Width | 4.750 in |
Weight | 6.200 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 12 V V |
Battery Included | Yes |
Battery Type | 12V MAX* Lithium Ion |
Battery Qty | 1 |
Battery Weight | 1 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 3 Ah Ah |
Watt Hours | 36 |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD |
Hazmat Code | A1 |
App Compatibility | No |
Blade Qty | 2 |
Blade Stroke Length | 0.625 In |
Bluetooth Compatibility | No |
Case Type | Case |
Dust Solution Compatible | Yes |
Impacts / Blows / Blasts Per Min | 5680 |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Keyless/Keyed | Keyless |
Quick/Tool Less Changing | No |
Uncertainty K1 (Vibration) | 2 |
Variable Speed | Yes |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
Our Tool Connect All-Purpose Cordless Work Light lights up the jobsite. This LED work light is compact and portable so it's convenient for everyday tasks, and it's bright enough to light large areas. Powerful, efficient LED technology produces up to 5000 lumens of natural white light, without the heat and hassle of halogen. The All-Purpose Light can be used freestanding, tripod mounted (sold separately), or hung with a convenient integrated hook. The light works with all DEWALT 20V MAX and FLEXVOLT batteries, with up to 11 hours of runtime for a full day of work. Also, use the free Tool Connect app to control and monitor your LED rechargeable work lights remotely on the jobsite. Plus, its impact resistant body and lens, and a 3-year limited warranty, it will stand up to your tough jobsite environments.
Features
- Durable impact-resistant design of the rechargeable work light stands up to jobsite conditions
- IP-54 rating for weather and dust resistance
- LED portable work light provides natural white light for jobsite illumination
- Set up DEWALT work light with freestanding, tripod-mounted (sold separately), or hanging via hook
Specifications
Height | 13.438 in |
Length | 11.563 in |
Width | 11.563 in |
Weight | 10.250 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Life | 11 hrs. |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** Using DCB206 6.0Ah 20V MAX* Lithium Ion battery on low setting. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Bare Tool | Yes |
Bulb Type | LED |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Light Units Of Measure | 5000 Lumens |
Number Of Light Bulbs | 1 |
Water Resistant | No |
Work Light Type | Stand Up Work Light |
Features
- Brushless motor requires no brush changes.
- Brake stops wheel in 2 seconds or less on average
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off.
- Features E-Switch Protection- When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool.
- Two stage trigger requires two actions to activate tool.
Specifications
Height | 9.600 in |
Length | 16.400 in |
Width | 5.900 in |
Weight | 11.400 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 2 |
Battery Weight | 1.9 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 6 Ah Ah |
Watt Hours | 120 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Charge Time | 90 |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (101-300 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed | CSA Certified |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD/Transition |
Hazmat Code | A2 |
Adjustable Handle | Yes |
App Compatibility | No |
Arbor Size | 5/8 in |
Bluetooth Compatibility | No |
Case Type | Bag |
Electronic Speed Control | No |
Engine | Brushless |
Gearing Type | Single Speed |
Grinding Wheel Included | No |
Handle Type | 2-position side handle |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | SET |
Maximum Speed | 9000 RPM Rpm |
Motor Bearings | Metal |
Overload Protection | Yes |
Replaceable Brushes | No |
Side Handle Included | Yes |
Spindle Lock | Yes |
Switch Type | Paddle |
Variable Speed | No |
Wheel Diameter | 4.5 in In. |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
Features
- 8,000 rpm motor provides high-power for cutting and grinding applications
- Quick-ChangeWheel Release allows tool-free wheel removal without need for a wrench
- Tool-free guard allows for quick and easy guard adjustments/positioning
- 2-finger trigger switch (w/ lock-off button) allows for convenient activation and easier gripping
- 2-position side handle offers greater control, comfort and versatility
- 5.0 amp hour batteries (2)
- Power to Grind
Specifications
Height | 5.630 in |
Length | 17.000 in |
Width | 10.880 in |
Weight | 10.280 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Motor Type | Brushed |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 2 |
Battery Weight | 1.4 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 5 Ah Ah |
Watt Hours | 100 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
Claims Needed | Yes |
Hazmat Code | A1 |
Arbor Size | 5/8 in |
Case Type | Bag |
Design Type | Cut-Off |
Electronic Speed Control | No |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | SET |
Maximum Speed | 8000 RPM Rpm |
Side Handle Included | Yes |
Switch Type | Trigger |
Variable Speed | Yes |
Wheel Diameter | 4.5 in In. |
The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Inline magazine provides easy use in multiple orientations and in tight spaces
Specifications
Height | 4.615 in |
Length | 14.365 in |
Width | 14.095 in |
Weight | 6.650 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Claims Needed | Yes |
Adjustable Depth | Yes (Tools Not Required) |
Air Inlet Size | 0.0 In |
Bare Tool | Yes |
Case Type | N/A (no case) |
Engine | Brushless |
Fastener Format | Strip |
Fastener Length | 2.5 |
Firing Mode | Full Sequential |
Gauge | 15 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Integrated Work Light | Yes |
Loading Type | Coil |
Magazine Angle | 35 |
Maximum Fastener Size | 2-1/2 in |
Maximum Length | 2.5 In |
Minimum Fastener Size | 1-1/4 in |
Minimum Length | 1.25 In |
Multi-Purpose | Single Purpose |
Nail Gauge | 15 gauge |
Nail Gun Angle | 34 degree |
Nailer Features | No Features |
Nails Per Charge | 1200 |
Range | 15 gauge |
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Inline magazine provides easy use in multiple orientations and in tight spaces
- Compatible with all DEWALT 20V MAX batteries
Specifications
Height | 12.375 in |
Length | 13.062 in |
Width | 4.375 in |
Weight | 6.000 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | ANSI Safety Listing | CSA Certified | UL Listed |
Claims Needed | Yes |
Adjustable Depth | Yes (Tools Not Required) |
Air Inlet Size | 0.0 In |
Bare Tool | Yes |
Case Type | N/A (no case) |
Fastener Format | Strip |
Fastener Length | 2.5 IN |
Firing Mode | Full Sequential |
Gauge | 16 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Integrated Work Light | Yes |
Loading Type | Strip |
Magazine Angle | 20.0 |
Magazine Capacity | 110 |
Maximum Fastener Size | 2-1/2 in |
Maximum Length | 2.5 In |
Minimum Fastener Size | 1-1/4 in |
Minimum Length | 1.25 In |
Multi-Purpose | Single Purpose |
Nail Gauge | 16 gauge |
Nail Gun Angle | 20 degree |
Nailer Features | No Features |
Nails Per Charge | 800 |
Range | 16 Gauge |
Features
- Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications
- Compact front to back length (4.0") allowing users to fit into hard to reach spaces
- Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger
- 3/8" ratcheting chuck with deep hex pocket allows 2" (50 mm) hex bit to be fully inserted for getting into tight spaces.
Specifications
Height | 3.600 in |
Length | 4.500 in |
Width | 13.000 in |
Weight | 3.400 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushed |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 1.5 Ah Ah |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | No |
File/Certification Number (Lowes Required) | TBD/Transition |
App Compatibility | No |
Bare Tool | Yes |
Bluetooth Compatibility | No |
Case Type | N/A (no case) |
Chuck Size | 3/8 in |
Chuck Type | Keyless |
Engine | Brushed |
Forward And Reverse Switch Included | Yes |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Chuck Size | 3/8-in |
Maximum Speed | 2000 RPM Rpm |
Number Of Speeds | 2 |
Power Input | 360 W |
Quick/Tool Less Changing | Yes |
Reversible | Yes |
Right Angle | Yes |
Side Handle Included | Yes |
Tool Power Output | 360 UWO |
Variable Speed | Yes |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4 in. narrow crown staples from 1/2 in. to 1-1/2 in. which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of staples
- Low nail lockout prevents dry firing and unwanted marks on the work material
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Bottom Load magazine for easy loading and removal of jammed fasteners
- Compatible with all DEWALT 20V MAX batteries
Specifications
Height | 4.490 in |
Length | 12.615 in |
Width | 11.970 in |
Weight | 6.550 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Claims Needed | Yes |
Bare Tool | Yes |
Crown Size | 1/2" to 1-1/2" In |
Depth Control | Tool-Free |
Engine | Brushless |
Fastener Length | 1/2" to 1-1/2" |
Fastener Type | Strip |
Fasteners Used | 18 Gauge |
Firing Mode | Full Sequential |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Fastener Size | 1-1/2 in |
Minimum Fastener Size | 1/2 in |
Multi-Purpose | Single Purpose |
Nailer Features | No Features |
Range | 18 gauge |
Our 20V MAX XR Cordless Jig Saw with Barrel Grip features an efficient motor for powerful performance and extreme runtime. Precisely control blade speed up to 3,200 spm with the variable speed trigger and dial, for professional results no matter what you're cutting. 4-position orbital action lets you adjust for optimal cutting of a variety of materials. A bright LED light illuminates dim work surfaces and makes it easy to follow cut lines. The updated all-metal, lever-action keyless blade clamp is designed for quick and easy blade changes of t-shank cordless jig saw blades. Also keyless, the shoe bevel is easy to adjust with detents at 0 degree, 15 degree, 30 degree, and a positive stop at 45 degree. A removable shoe cover helps protect materials from scratches, and an integrated dust blower helps remove dust and debris from your line of sight as you cut.
Features
- Brushless motor delivers efficient performance for longer runtime (vs. DCS331 Jig Saw)
- Compact size for easy grip and maximum control
- Bright LED light helps to illuminate dimly lit work surfaces
- Variable speed dial provide precise speed control
- All-metal, lever-action keyless blade change allows for quick and easy t-shank blade changes
- Integrated dust blower helps clear line of sight while cutting
- All-metal, keyless shoe bevel with detents at 0°, 15°, 30°, and a positive stop at 45° for easy adjustment
- No-mar shoe cover to help protect work surface from scratches
- 4-position orbital action provides control of cut quality and speed
- Accepts t-shank jig saw blades for optimal holding power
Specifications
Height | 8.192 in |
Length | 11.530 in |
Width | 3.750 in |
Weight | 5.200 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Charger Included | No |
Amperage | 0.0 |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | UL Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | No |
File/Certification Number (Lowes Required) | TBD |
Adjustable Shoes | Yes |
App Compatibility | No |
Bare Tool | Yes |
Bevel Capacity | 45 |
Blade Qty | 1 |
Blade Stroke Length | 1 In |
Blade Type | Jig Saw T-Shank |
Bluetooth Compatibility | No |
Case Type | No Case Included |
Dust Blower | Yes |
Dust Solution Compatible | Yes |
Electronic Speed Control | Yes |
Engine | Brushless |
Fence Included | No |
Housing Material | Metal/Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Integrated Laser Guide | No |
Integrated Work Light | Yes |
Keyless/Keyed | Keyless |
Length Of Stroke | 1 in In. |
Lock-On Switch | No |
Maximum Capacity Steel | 0.375 In |
Maximum Capacity Wood | 2 In |
Maximum Metal Cutting Capacity | 0.375 In |
Number Of Orbital Setting | 4 |
Orbital Action | Yes |
Saw Type | Top / D-Handle |
Scrolling Action | No |
Strokes Per Minute | 3200 |
Uncertainty K1 (Vibration) | 1.5 |
Variable Speed | Yes |
Wifi Compatibility | No |
Works With Android | No |
Works With Ios | No |
Features
- Flexible power options - corded or cordless
- Accuracy - CUTLINEblade positioning system and highly visible miter and bevel scales
- Runtime - Up to 289 cross cuts in 3-1/4 in. base molding
- Portability - Compact design weighs only 56lbs.
Specifications
Height | 20.600 IN |
Length | 32.360 IN |
Width | 24.020 IN |
Weight | 79.770 LB |
BLADE DIAMETER | 12 in |
MAXIMUM SPEED | 3800 RPM |
VERTICAL CROSSCUT CAPACITY 0° MITER 0° BEVEL | 0 in |
Our 20V MAX XR 5-inch Brushless Cordless Random Orbital Sander provides the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8,000 to 12,000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the wood sander directly to the DWV010 or DWV012 dust collectors. Its rubber overmold grip provides comfortable sanding. Replacing the 8-hole, hook-and-loop sanding paper is quick and easy. Battery and charger are sold separately.
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable-speed control from 8,000 to 12,000 OPM to match the speed to the application.
- Low-profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life
- Texturized rubber overmold grip for comfortable sanding
- One-handed locking dust bag.
- Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors (sold separately)
- To attach dust port to other vacuum systems with 1-1/4 in. hoses, use DWV9000 Universal Quick Connector (sold separately).
- PSA replacement pad available as service part number N373679 (Sold Separately)
Specifications
Height | 5.750 in |
Length | 8.813 in |
Width | 6.375 in |
Weight | 2.600 lbs |
Product Diameter Us | 3.094 IN |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 2 Ah Ah |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
File/Certification Number (Lowes Required) | TBD/Transition |
Hazmat Code | A1 |
Bare Tool | Yes |
Case Type | Bag |
Disc Size | 5 In |
Dust Collection | Yes |
Dust Collection Component | Bag |
Electronic Speed Control | No |
Engine | Brushless |
Individual Vs. Set (Syndigo) | SET |
Maximum Speed | 12000 RPM Rpm |
Orbital Action | Yes |
Pad Size | 5" |
Sander Style | Random Orbit |
Sanding Speed Maximum | 12000 Opm |
Single Or Multi Plane | Single |
Variable Speed | Yes |
Features
- 1-3/4 HP (maximum motor HP), 11.0 amp motor provides the power to rout smoothly through the toughest hardwoods
- Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location
- Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
- Quick release motor latches for fast and easy motor pack removal for bit and base changes
- Detachable cordset offers cordset serviceability and removes the need for a "shorty" cord motor pack
- Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy
- Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings
- Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control
- Dust-Sealed Switch protects against dust ingestion for longer switch life
- Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight
Specifications
Height | 7.250 in |
Length | 10.750 in |
Width | 9.600 in |
Weight | 10.000 lbs |
Power Source | Electric |
Cordless Vs. Corded | Corded |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Amperage | 11 |
Cord Length | 96 Ft |
Prop 65 Generic Warning | No |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA safety listing |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | No |
File/Certification Number (Lowes Required) | TBD/Transition |
Adjustable Depth | Yes |
Base Type | Fixed Base |
Dust Collection | No |
Electronic Speed Control | Yes |
Fence Included | No |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Spindle Lock | No |
Variable Speed | No |
Features
- Durable blade design: bi-metal construction delivers blade flexibility and a long-lasting cutting edge
- Versatile use: Cuts a variety of common metal construction materials including metal conduit, copper pipe and structural steel
- Tool compatibility: Works with DEWALT DCS377 and DCS375 Compact Band Saw and other manufacturers" 27 in. machines
Specifications
Height | 0.800 in |
Length | 15.000 in |
Width | 7.000 in |
Weight | 0.391 lbs |
Power Source | NON-ENERGY USING |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Prop 65 Generic Warning | Yes |
Warranty | MWC |
Blade Cutting Material | Bimetal |
Blade Length | 27 In |
Blade Material | Bimetal |
Blade Qty | 3 |
Blade Tooth Spacing | No |
Blade Type | Band Saw |
Blade Width | 0.02 |
Compatibility | Band Saws |
Cuts Into | Multi-Purpose |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Number Of Teeth | 486 |
Teeth Per Inch | 18 |
Thickness | 0.02 In |
Features
- 9 Gauge - For strength and durability to meet rural application needs
- Divergent Point Tips - For proper staple drive across wood grain
- Zinc-Aluminum Coating - Exceeds class 3 rating for long term corrosion resistance
- Barbed Staple with Adhesive Coating - For increased holding power
- Paper Tape Collation - For speed and efficiency compared to loose staples
Specifications
Height | 3.065 in |
Length | 8.692 in |
Width | 8.250 in |
Weight | 16.800 lbs |
Power Source | NON-ENERGY USING |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Warranty | MWC |
Claims Needed | No |
Collation | Paper |
Crown Size | 0.788 in In |
Gauge | 9 |
Individual Vs. Set (Syndigo) | SET |
Staple Type | 3/4" Crown |
Use Location | Other |
This 34-piece Sockets Set is a versatile set that can be easily transported between work areas. This set features a removable inner tray designed to fit in most tool chests with standard height drawers. It also has side hinges that interlock with similar DEWALT mechanics tool sets for an organized storage solution. Included in this set is a 72 tooth count ratchet, great for accessing tough to reach spots found on a worksite. The SAE/metric sockets and wrenches have hard stamped markings to easily identify the tool you need.
Features
- Set includes:1- 3/8" Drive pear head ratchet, 24 3/8" Drive sockets- 6 point,SAE-1/4, 5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,MM- 8,9,10,11,12,13,14,15,16,17,18,19
- Deep laser etched markings for easy socket size identification
- Tilting socket rails allow easy access and organization
- 72 tooth gear system for high torque ratcheting
- Knurled beauty rings provide a non-slip gripping surface
- 5 degree arc swing and slim head design for maneuverability in constricted areas
- Low profile directional lever helps reduce catch points and for easy one-hand operation
- Locking, stackable case with removable inner tray
Specifications
Height | 2.6 in |
Length | 13.6 in |
Width | 8.4 in |
Weight | 4.9 lbs |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | No |
Warranty | 1LW |
Claims Needed | No |
Case Type | Hard |
Color Coded | No |
Drive Size | 1/4 in |
Etched Or Stamped | Yes |
Impact Or Standard | Standard |
Individual Vs. Set (Syndigo) | SET |
Unit Of Measure | SAE & Metric |
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC616)
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Compatible with all DEWALT 20V MAX batteries
Specifications
Height | 13.060 in |
Length | 12.613 in |
Width | 4.374 in |
Weight | 6.500 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | ANSI Safety Listing | UL Listed |
Claims Needed | Yes |
Hazmat Code | A1 |
Bare Tool | Yes |
Case Type | N/A (no case) |
Engine | Brushless |
Fastener Format | Strip |
Gauge | 16 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Integrated Work Light | Yes |
Loading Type | Strip |
Magazine Angle | 180 |
Magazine Capacity | 110 |
Maximum Fastener Size | 2-1/2 in |
Maximum Length | 2.5 In |
Minimum Fastener Size | 1-1/4 in |
Minimum Length | 1.25 In |
Multi-Purpose | Single Purpose |
Nail Gauge | 16 gauge |
Nail Gun Angle | 0 degree |
Nails Per Charge | 770 |
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free selectable trigger for sequential or contact actuation modes
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Low nail lockout prevents dry firing and unwanted marks on the work material
Specifications
Height | 4.500 in |
Length | 13.000 in |
Width | 11.500 in |
Weight | 6.340 lbs |
Power Source | Electric |
Cordless Vs. Corded | Cordless |
Motor Type | Brushless |
Voltage | 20 V V |
Battery Included | No |
Battery Type | 20V MAX* Lithium Ion |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | Yes |
Charger Included | No |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Certifications Or Listings | ANSI Safety Listing |
California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
Claims Needed | Yes |
Adjustable Depth | Yes (Tools Not Required) |
Air Inlet Size | 0.0 In |
Bare Tool | Yes |
Case Type | N/A (no case) |
Engine | Brushless |
Fastener Format | Strip |
Fastener Length | 2.125 |
Firing Mode | Full Sequential |
Gauge | 18 |
Housing Material | Plastic |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Integrated Work Light | Yes |
Kit | No |
Loading Type | Coil |
Maximum Fastener Size | 2-1/8 in |
Maximum Length | 2.125 In |
Minimum Fastener Size | 5/8 in |
Minimum Length | 0.625 In |
Multi-Purpose | Single Purpose |
Nail Gauge | 18 gauge |
Nail Gun Angle | 0 degree |
Nailer Features | No Features |
Nails Per Charge | 1200 |
Range | 18 Gauge |
Features
- Ergonomic, Lock-on slide switch for maximum flexibility
- Easy service, 1 screw design
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- Convenient paddle switch
- Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory)
- This product runs off of AC/DC power
- 4.2 amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications
Specifications
Height | 3.740 in |
Length | 18.100 in |
Width | 4.210 in |
Weight | 5.000 lbs |
Power Source | Electric |
Cordless Vs. Corded | Corded |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Amperage | 4.2 |
Cord Length | 8 Ft |
Warranty | 3LW1YS90D |
Certifications Or Listings | CSA Listed |
Claims Needed | No |
Electronic Speed Control | No |
Individual Vs. Set (Syndigo) | INDIVIDUAL |
Maximum Speed | 25000 RPM Rpm |
Power Input | 4000 W |
Variable Speed | No |
Wheel Diameter | 1.5 in In. |
Includes
- Vinyl Grip Multi Grip Bit Driver
- (10) SAE Nut Driver Bits: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2
- (10) Metric Nut Driver Bits: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12
- (10) Torx Bits: T6, T7, T8, T9. T10, T15, T20, T25, T27, T30
- (3) Square Drive Bits: 1, 2, 3
- (3) Phillips Bits: 1, 2, 3
- (5) Metric Hex Bits: 2.5, 3, 4, 5, 6
- (6) SAE Hex Bits 3/32, 1/8, 5/32, 3/16, 7/32, 1/4
- (3) Pozi Drive Bits: 1, 2, 3
- (13) Flat Bits: SAE 1/8, 5/32, 3/16, 7/32, 1/4, Metric 3, 4, 5, 5.5, 6, 6, 6.5, 7
- (5) Tamperproof Bits: T10, T15, T20, T25, T27
- Socket Adapter
Features
- Use to fasten nuts
- Durable Transparent Lid
- Exceeds ANSI Specifications
- Vinyl Grip Multi Grip Bit Driver.
Specifications
Height | 2.630 IN |
Length | 14.000 IN |
Width | 8.000 IN |
Weight | 3.150 LB |
Type | SOCKETS: BIT SOCKETS |
Net Lit-Ion Y/N | No |
Warranty | FLW |
Piece Count | 70 |
Finish | Chrome |
Unit Of Measure | SAE |
Easily tackle demanding woodworking applications with the 60V MAX 12in. Double Bevel Sliding Miter Saw Kit. Cut. Capture. Charge: with Regenerative Braking Technology to extend runtime with virtually every cut, up to 675 cuts in 3-1/4 in. MDF base molding or up to 255 cuts in pressure treated 4 in. x 4 in. timber, all on only one DEWALT FLEXVOLT DCB609 battery. This miter saw features an efficient bevel gear transmission and has the ability to capture up to 94% of dust. The CUTLINE blade positioning system provides accurate cut line indication. The saw also features updated controls designed for overall ergonomics compared to previous DEWALT designs. At a weight of 50.9 lb (tool only), easily take this saw on the go across demanding jobsites.
Features
- SINGLE BATTERY OPERATION Capable power from 60V MAX to tackle professional applications
- EXCEPTIONAL RUNTIME Delivers up to 675 cuts in 3 1/4 in. MDF Base Molding & 255 cuts in pressure treated 4 in. x 4 in. Lumber
- CUT.CAPTURE.CHARGE Regenerative Braking Technology extends runtime by redirecting lost energy back into the battery
- EFFICIENT DUST CAPTURE Up to 94% of dust captured when cutting 2x10 SPF using DWV015 Dust Extractor (sold separately)
Includes
- DCS781 60V MAX Brushless Cordless 12 in. Double Bevel Sliding Miter Saw
- DCB609 20V/60V MAX FLEXVOLT Battery
- DCB1106 6amp Charger
- Blade
- Blade Wrench
- Material Clamp
- Stabilizer Bar
- Vacuum adapter
- Dust Bag
- (2) Base Extensions
Specifications
Height | 19.500 IN |
Length | 32.700 IN |
Width | 23.000 IN |
Weight | 70.000 LB |
Type | BENCH & STATIONARY: MITER SAWS |
Battery Included | Yes |
Battery Quantity | 1 |
Charger Included (Y/N) | Yes |
Motor Type | Brushless |
Net Lit-Ion Y/N | No |
Voltage (V) | 60 V |
Disclaimer | Maximum initial battery voltage (measured without a workload) is 60 volts. Nominal voltage is 54. | Using a DeWalt FLEXVOLT DCB609 battery. | When Cutting 2x10 SPF using DCB609 battery and DWV015 Dust Extractor (sold separately). |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Bare Tool (Y/N) | No |
Includes
- Mobile Base
- Stand
- Hardware
- MDF top
- Shelf
Features
- Maximum versatility
- Durable and stable under heavy loads
- Easy movement and storage of planer and stand
Specifications
Height | 6 IN |
Length | 30 IN |
Width | 24.5 IN |
Weight | 54.54 LB |
Type | BLADES: PLANER & JOINTER |
Battery Included | No |
Charger Included (Y/N) | No |
Net Lit-Ion Y/N | No |
Warranty | 3LW1YS90D |
Piece Count | 1 |
Primary Material | Steel |
This 20V MAX Brushless 2 in. Magnetic Drill Press Kit features FLEXVOLT ADVANTAGE technology that makes the drill up to 32% more powerful when using a DEWALT FLEXVOLT DCB609 battery as well as results in cutting speeds up to 50% faster vs. competitor. Built to help prevent tool failure due to lost power, it securely attaches to 1/4 in. and thicker metal by using a permanent magnet base that requires no electrical charge. This high-performance magnetic drill press packs the capacity to drill up to 40 holes per charge. The Quick-Change Chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck (Included). To keep the user in control, the E-Clutch is designed to turn off when it detects rotation, part of the PERFORM & PROTECT family. The drill has 5 variable speeds for each of the 2 mechanical gears for a total of 10 speed settings to allow for a wide RPM range for a variety of applications. Includes (2) DCB609G FLEXVOLT Oil Resistant 9.0AH batteries and Charger.
Includes
- 20V MAX Brushless 2 in. Magnetic Drill Press
- (2) DCB609G FLEXVOLT(R) Oil Resistant 9.0AH batteries
- DCB118 Charger
- 1/2 in. Keyed Chuck Attachment
- Chuck Key
- Fluid Reservoir with Tube
- Chip Guard
- Safety Chain
- (2) DeWalt Annular Cutter ejection Pin
- Kit Box
Features
- HIGH DRILLING CAPACITY: Drill up to a 2 in. hole through 2 in. of structural steel
- ADJUST SPEED BASED ON THE DEMANDS OF THE JOB with 5 variable speeds for each of the 2 mechanical gears for a total of 10 speed settings
- PERMANENT MAGNET that requires no electrical charge to attach to steel
- QUICK CHANGE CHUCK SYSTEM allows for tool free change between 3/4" Weldon Shank Bits and 1/2" keyed chuck
Specifications
Height | 7.480 IN |
Length | 28.150 IN |
Width | 19.570 IN |
Weight | 58.220 LB |
Type | DRILLS: COMPACT |
Battery Included | Yes |
Battery Quantity | 2 |
Battery Weight | 3 |
Motor Type | Brushed |
Voltage (V) | 20 V |
Watt Hours | 60 |
Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. | Up to 32% more powerful - using DCB609G battery vs. DCB205 battery (sold separately) Up to 40 holes per charge - on 1/2 inch ASTM A36 steel 13/16 inch hole size using DCB609G battery | The DEWALT PERFORM & PROTECT line of tools and accessories is YOUR FIRST LINE OF DEFENSE on the job. They are designed to provide a high level of one or more of the following: dust containment, control, or low vibration, without sacrificing performance. |
Warranty | 3LW1YS90D |
Bare Tool (Y/N) | No |
Features
- Matrix II High Speed Steel Edge for Heat and Wear Resistance
- 8% Cobalt Content For Added Durability & Wear
- Rc 65-67 Tooth Hardness For Increased Wear Resistance
- Alloy Steel Backer for Fatigue Resistance
Specifications
Height | 14.000 in |
Length | 5.250 in |
Width | 0.500 in |
Weight | 0.350 lbs |
Power Source | NON-ENERGY USING |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Prop 65 Generic Warning | Yes |
Warranty | 30DLW |
Claims Needed | No |
Blade Cutting Material | High Speed Steel |
Blade Length | 32.875 In |
Blade Material | High Speed Steel |
Blade Qty | 3 |
Blade Tooth Spacing | No |
Blade Type | Band Saw |
Blade Width | 0.5 |
Compatibility | Band Saws |
Cuts Into | Metal |
Individual Vs. Set (Syndigo) | SET |
Number Of Teeth | 808 |
Teeth Per Inch | 18 |
Thickness | 0.02 In |
Features
- Matrix II High Speed Steel Edge for Heat and Wear Resistance
- Alloy Steel Backer for Fatigue Resistance
Specifications
Height | 14.000 in |
Length | 5.250 in |
Width | 0.875 in |
Weight | 0.350 lbs |
Power Source | NON-ENERGY USING |
Battery Included | No |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Net Lit-Ion Y/N | No |
Prop 65 Generic Warning | No |
Warranty | MWC |
Blade Cutting Material | High Speed Steel |
Blade Length | 44.875 In |
Blade Material | High Speed Steel |
Blade Qty | 3 |
Blade Tooth Spacing | No |
Blade Type | Band Saw |
Blade Width | 0.5 |
Compatibility | Band Saws |
Cuts Into | Metal |
Individual Vs. Set (Syndigo) | SET |
Number Of Teeth | 808 |
Teeth Per Inch | 16 |
Thickness | 0.02 In |
Specifications
Height | 3.750 in |
Length | 12.500 in |
Width | 9.813 in |
Weight | 5.500 lbs |
MAXIMUM SPEED | 2300 RPM |
Take on a variety of fastening projects using the 20V MAX 3/8 in. Cordless Impact Wrench with Hog Ring Anvil Kit. The high-output Impact Wrench delivers the power needed for both large and small jobs with up to 250 ft-lbs of tightening torque and 400 ft-lbs of breakaway torque. Its compact, lightweight build was engineered for seamless maneuverability in tight spots. Dimly lit work conditions are no problem for this Cordless Impact Wrench, which features an on-board LED for visibility in dark spaces.
Features
- STRONG PERFORMANCE: Up to 250 ft-lbs of max tightening torque and 400 ft-lbs of max breakaway torque
- ACCESS HARD-TO-REACH WORKSPACES with its compact size
- QUICKLY CHANGE SOCKETS: Hog ring anvil for rapid, secure socket changes
- BRIGHTEN DARK WORK AREAS with on-board LED ring
Specifications
Height | 12.677 in |
Length | 9.700 in |
Width | 3.900 in |
Weight | 7.266 lbs |
Power Source | Battery |
Cordless Vs. Corded | Cordless |
Voltage | 20 V V |
Battery Included | Yes |
Battery Type | 20V MAX* Lithium Ion |
Battery Qty | 2 |
Battery Weight | 1.4 |
Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
Battery Amp Hours | 5 Ah Ah |
Watt Hours | 100 |
Net Lit-Ion Y/N | Yes |
Charger Included | Yes |
Charger Type | Wall Mountable Charging Base |
Battery Required | Yes |
Number Of Batteries Required | 1 |
Rechargeable | Yes |
Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
Hazmat | Li-Ion (<101 WH) |
Prop 65 Generic Warning | Yes |
Warranty | 3LW1YS90D |
Claims Needed | Yes |
Hazmat Code | A1 |
Drive Size | 3/8 in |
Individual Vs. Set (Syndigo) | SET |
The DEWALT DCF897P2 20v MAX XR High Torque 1/2-inch Impact Wrench w. Hog Ring Retention Pin Anvil (5.0 Ah) offers premium performance for fastening and breakaway; Up to 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque. With best in class ergonomics for comfortable use, this Impact Wrench has a compact design of 8-13/16-inch in length and weighs only 7.2 lbs. It features multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM), with an efficient motor design that allows for optimum runtime and variable speed settings. DEWALT impact wrench has a 3/4-inch hog ring with retention pin anvil, along with a LED light with 20 second delay for increased visibility in dark work areas. Kit includes: (1) DCF897 - 20v MAX XR Brushless High Torque 3/4-inch Impact Wrench with Hog Ring Anvil - Tool, (2) DCB205 - 5.0 Ah batteries, (1) Multi voltage charger.
Specifications
Height | 10.188 in |
Length | 15.188 in |
Width | 5.750 in |
Weight | 11.800 lbs |
MAXIMUM SPEED | 1900 RPM |