S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
This brushless 4-1/2 in. cordless circular saw kit comes with one 20V MAX 5.0 Ah battery, charger, blade, rip fence, dust port adaptor, and tool bag. The DCS571 cordless circular saw features a bevel gear design allowing users to cut 2x material at 90 degrees and 1x material at 45 degrees. With convenient on-board blade key storage users can change blades with minimal hassle. Elongated handle optimizes reach for rip cutting OSB and plywood. Using the DCB205 battery, you can cut up to 369 liner feet of 3/4 in. OSB.
Features
- Brushless motor allows you to cut up to 369 linear feet of 3/4 in. OSB using DCB205 battery
- Removable auxiliary handle for increased control
- Hang hook for increased convenience
- On-board blade key storage for hassle free blade changes
- 1-1/2 in. finger trigger allows users to choke-up on tool if necessary for their application
- Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2 in. blade
- Electronic blade brake stops blade quickly for safety and productivity
- Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber
- On-board dust port for dust control
Specifications
| Height | 6.187 in |
| Length | 20.437 in |
| Width | 12.375 in |
| Weight | 11.71 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 1 |
| Battery Weight | 1.4 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Watt Hours | 100 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Adjustable Depth | Yes |
| Arbor Size | 0.375 |
| Bevel Capacity | 45 |
| Blade Diameter | 4 1/2 in In. |
| Blade Location | Left |
| Blade Qty | 1 |
| Blade Wrench | No |
| Brake | Yes |
| Case Type | Bag |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | Yes |
| External Motor Brush Access | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Yes |
| Integrated Work Light | Yes |
| Maximum Cut Depth @ 45 Deg. | 1" |
| Maximum Cut Depth @ 90 Deg. | 1-9/16" |
| Maximum Speed | 4500 RPM Rpm |
| Saw Drive Type | Belt Drive |
| Shoe Material | Metal |
Item#:
DCS571P1
Manufacturer Item:
DCS571P1
Your Price:
299.99
Each
Features
- POWERFUL AND EFFICIENT brushless motor provides optimal cutting performance in a variety of materials
- HIGH MANEUVERABILITY with its lightweight and compact design
- QUICKLY ADJUST the bevel capacity from 0 - 50° with the tool-free bevel lever
- CONVENIENT STORAGE on the jobsite with the built-in rafter hook
- ADDED SAFETY: Electric brake quickly stops the blade after the trigger is released
- INCREASED VISIBILITY and cut accuracy with bright LED
- MINIMIZE DUST WHILE CUTTING with the optional dust chute, compatible with the DEWALT AirLock system or standard 35 mm dust extractor
- COMPATIBLE with all DEWALT 20V MAX and FLEXVOLT Batteries
Specifications
| Height | 8.500 in |
| Length | 15.250 in |
| Width | 9.370 in |
| Weight | 7.850 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| File/Certification Number (Lowes Required) | TBD |
| Adjustable Depth | Yes |
| App Compatibility | No |
| Arbor Size | 0.625 |
| Bare Tool | Yes |
| Bevel Capacity | 50 |
| Bevel Stop | Yes |
| Blade Diameter | 6 1/2 in In. |
| Blade Location | Left |
| Blade Qty | 1 |
| Blade Wrench | Yes - Loose |
| Bluetooth Compatibility | No |
| Brake | Yes |
| Case Type | N/A (no case) |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | Yes |
| Engine | Brushless |
| External Motor Brush Access | Brushless Motor |
| Fence Included | No |
| Gearing Type | Helical |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Yes |
| Integrated Work Light | Yes |
| Maximum Cut Depth @ 45 Deg. | 1.625 in |
| Maximum Cut Depth @ 90 Deg. | 2.125 in |
| Maximum Speed | 4950 RPM Rpm |
| Saw Drive Type | Sidewinder |
| Shoe Material | Aluminum |
| Spindle Lock | Yes |
| Variable Speed | Yes |
| Wifi Compatibility | No |
| Works With Android | No |
| Works With Ios | No |
Item#:
DCS565B
Manufacturer Item:
DCS565B
Your Price:
198.99
Each
The seamlessly adaptable ATOMIC 20V MAX 3/8 in. Cordless Impact Wrench was designed to handle multiple types of fastening projects. With up to 450 ft-lbs of max breakaway torque and up to 300 ft-lbs of max fastening torque in a lightweight, compact design, this easily maneuverable Impact Wrench delivers the versatility you need to tackle a range of work. The unit allows you to choose between 4 speeds while the Precision Wrench control feature and Timber Screw mode optimize its performance, operability, and flexibility. Dimly lit work areas create no issue for this Cordless Impact Wrench, which comes with an on-board LED work light for visibility in dark spaces.
Features
- Strong Performance: Up To 300 Ft-Lbs Of Max Fastening Torque And 450 Ft-Lbs Of Max Breakaway Torque
- Enhanced User Control In A Variety Of Applications With 4 Speed Settings
- Helps Prevent Overtightening And Fastener Run-Off With Precision WrenchControl
- Brighten Dark Workspaces With Onboard Led And Brightness Control
- Quickly Change Sockets: Hog Ring Anvil For Rapid, Secure Socket Changes
- Optimized Speed In Wood With Timber Screw Mode
- Built For Long Life: Glass-Filled Nylon Housing Provides Resistance From Damage Caused By Some Oils And Solvents
Specifications
| Height | 3.976 in |
| Length | 12.600 in |
| Width | 9.724 in |
| Weight | 7.350 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 1.4 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Watt Hours | 100 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Charge Time | 90 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| Claims Needed | No |
| Hazmat Code | A1 |
| Case Type | Bag |
| Drive Size | 1/2 in |
| Forward And Reverse Switch Included | Yes |
| Impacts / Blows / Blasts Per Min | 3550 |
| Individual Vs. Set (Syndigo) | SET |
| Maximum Speed | 2500 RPM Rpm |
| Maximum Torque Ft/Lbs. | 300 |
| Torque | 300 ft.lb. Lb-In |
| Variable Speed | Yes |
Item#:
DCF923P2
Manufacturer Item:
DCF923P2
Your Price:
445.99
Each
This cordless kit includes one 3/8 in. impact wrench, two 12V MAX 2Ah batteries, charger, and tool bag. This cordless impact wrench is designed for hard to reach applications requiring tighting or loosening of nuts and bolts. At only 5.1 in. long it is packed to perform with 1,500 in-lbs of fastening torque and 2,400 in-lbs of breakaway torque. It also features 3 LED lights positioned on the nosecone to illuminate work areas. This impact wrench is equipped with a 3-mode switch with Precision Wrench to help prevent overtightening and run off.
Features
- DCF902 12V MAX Brushless 3/8 in. Impact Wrench has 30% more torque
- DCF902 12V MAX Brushless 3/8 in. Impact Wrench is 30% shorter
- Brushless motor for maximum runtime and durability
- 3/8 in. square drive
- 3 mode settings including Precision Wrenchtrade for control in a variety of applications
- 3 LED lights for illumination onto work surface
- Lightweight at 1.73 lbs (tool only)
- Kitted with 2.0 Ah batteries with state of charge indicator
Specifications
| Height | 9.875 in |
| Length | 10.800 in |
| Width | 4.600 in |
| Weight | 4.544 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 12 V V |
| Battery Included | Yes |
| Battery Type | 12V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 0.5 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 2 Ah Ah |
| Watt Hours | 24 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Charge Time | 30 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** DCF902 using DCB122 2Ah battery vs. DCF813 using DCB120 1.3 Ah battery. | * Maximum initial battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Anvil Type | Hog ring |
| App Compatibility | No |
| Bluetooth Compatibility | No |
| Chuck Size | 3/8 in |
| Drive Size | 3/8 in |
| Forward And Reverse Switch Included | Yes |
| Impacts / Blows / Blasts Per Min | 3600 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Kit | Yes |
| Maximum Speed | 2850 RPM Rpm |
| Maximum Torque Ft/Lbs. | 200 |
| Variable Speed | Yes |
| Wifi Compatibility | No |
| Works With Android | No |
| Works With Ios | No |
Item#:
DCF902F2
Manufacturer Item:
DCF902F2
Your Price:
154.99
Each
Features
- UP TO 77% MORE POWER when paired with FLEXVOLT batteries
- FASTER CUTTING: Powerful brushless motor delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- ELECTRIC BRAKE stops the blade after the trigger is released
- INCREASED VISIBILITY: Bright LED increases visibility and cut accuracy
- EASY STORAGE: Integrated rafter hook for quick and easy storage
- Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT 20V MAX and FLEXVOLT Batteries
- MINIMIZES DUST: Optional dust port allows connection to a dust extractor to minimize dust during cutting (DWE575DC Dust Port sold separately).
Specifications
| Height | 9.562 in |
| Length | 15.375 in |
| Width | 8.300 in |
| Weight | 10.150 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** Using a DCB606 FLEXVOLTbattery vs DCB205 DEWALT 20V MAX* battery (batteries sold separately) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Adjustable Depth | Yes |
| Arbor Size | 0.625 |
| Bare Tool | Yes |
| Bevel Capacity | 57 |
| Blade Diameter | 7 1/4 in In. |
| Blade Location | Right |
| Blade Qty | 1 |
| Blade Wrench | Yes - Stored on Tool |
| Brake | Yes |
| Case Type | No Case Included |
| Dust Blower | No |
| Dust Collection | Yes |
| Dust Port | Yes |
| Engine | Brushless |
| External Motor Brush Access | Brushless Motor |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Not Featured |
| Integrated Work Light | Not Featured |
| Maximum Cut Depth @ 45 Deg. | 2 |
| Maximum Cut Depth @ 90 Deg. | 2.5625 |
| Maximum Speed | 5500 RPM Rpm |
| Saw Drive Type | Sidewinder |
| Shoe Material | Aluminum |
Item#:
DCS573B
Manufacturer Item:
DCS573B
Your Price:
249.99
Each
Features
- Power - Brushless motor provides 5500RPM maintaining speed under load
- Runtime - 330 crosscuts in 2x4 (pine)
- Capacity - 7-1/4" Blade provides 2-9/16" Cutting Capacity at 90 degrees
- Ease of Use - Bevel capacity up to 57 degrees for increased versatility
Specifications
| Height | 9.600 in |
| Length | 15.350 in |
| Width | 9.437 in |
| Weight | 9.850 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Adjustable Depth | Yes |
| App Compatibility | No |
| Arbor Size | 0.625 |
| Bare Tool | Yes |
| Bevel Capacity | 57 |
| Bevel Stop | No |
| Blade Diameter | 7 1/4 in In. |
| Blade Location | Right |
| Blade Qty | 1 |
| Blade Wrench | Yes - Loose |
| Bluetooth Compatibility | No |
| Brake | Yes |
| Case Type | N/A (no case) |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | No |
| Engine | Brushless |
| External Motor Brush Access | Brushless Motor |
| Fence Included | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Not Featured |
| Integrated Work Light | Yes |
| Maximum Cut Depth @ 45 Deg. | 2 |
| Maximum Cut Depth @ 90 Deg. | 2.5625 |
| Maximum Speed | 5200 RPM Rpm |
| Saw Drive Type | Sidewinder |
| Shoe Material | Aluminum |
| Spindle Lock | No |
| Variable Speed | No |
| Wifi Compatibility | No |
| Works With Android | No |
| Works With Ios | No |
Item#:
DCS570B
Manufacturer Item:
DCS570B
Your Price:
229.99
Each
Features
- Brushless motor allows you to cut up to 369 linear feet of 3/4 in. OSB using DCB205 battery (sold separately)
- Removable auxiliary handle for increased control
- Hang hook for increased convenience
- On-board blade key storage for hassle free blade changes
- 1-1/2 in. finger trigger allows users to choke-up on tool if necessary for their application
- Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2 in. blade
- Electronic blade brake stops blade quickly for safety and productivity
- Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber
- On-board dust port for dust control
Specifications
| Height | 6.700 in |
| Length | 17.600 in |
| Width | 5.125 in |
| Weight | 6.750 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,9.pdf |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Adjustable Depth | Yes |
| Arbor Size | 0.375 |
| Bare Tool | Yes |
| Bevel Capacity | 45 |
| Blade Diameter | 4 1/2 in In. |
| Blade Location | Left |
| Blade Qty | 1 |
| Blade Wrench | No |
| Brake | Yes |
| Case Type | N/A (no case) |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | Yes |
| Engine | Brushless |
| External Motor Brush Access | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Yes |
| Integrated Work Light | Yes |
| Kit | No |
| Maximum Cut Depth @ 45 Deg. | 1 in |
| Maximum Cut Depth @ 90 Deg. | 1-9/16 |
| Maximum Speed | 4500 RPM Rpm |
| Saw Drive Type | Sidewinder |
| Shoe Material | Metal |
Item#:
DCS571B
Manufacturer Item:
DCS571B
Your Price:
169.99
Each
This Compact Brushless Impact Driver Kit includes two 20V MAX Lithium Ion batteries, one charger, and a carrying bag. At only 5.1 in. front to back, this Impact Driver features a high performance brushless motor that delivers 1700 in-lbs. of torque and 3 LEDs to provide optimum illumination as you work. The handle is ergonomically designed for increased comfort, balance, and easier tool control. It also has a removable belt hook. It's backed by a 3-year, limited warranty so you can buy with confidence.
Features
- 1700 in-lbs. of torque delivering the power you need to get a majority of applications done
- Variable speed trigger allows for control and precision on delicate work surfaces
- Only 5.1 in. in length to fit in tight spaces
- DEWALT built brushless motor for efficient performance and runtime
- 3 bright LEDs for dimly lit workspaces
Specifications
| Height | 11.968 in |
| Length | 9.567 in |
| Width | 3.819 in |
| Weight | 5.348 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 0.80 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 1.3 Ah Ah |
| Watt Hours | 26 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Charge Time | 60 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed | CSA Certified |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Sds Sheet | http://images.salsify.com/image/upload/s--z_4A2CyH--/tza5vmxmctno06wl8oxs.pdf |
| Chuck Size | 1/4 in |
| Chuck Type | Keyless |
| Depth | 12.5 In |
| Drive Size | 1/4 in Square |
| Engine | Brushless |
| Housing Material | Plastic |
| Impacts / Blows / Blasts Per Min | 3200 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Keyless/Keyed | Keyless |
| Kit | Yes |
| Led Light | Yes |
| Maximum Speed | 2800 RPM Rpm |
| Maximum Torque | 1700 In-Lbs |
| Maximum Torque Ft/Lbs. | 1717 |
| Minimum Torque | 1717 Ft-Lbs |
| No Load Speed | 3200 Bpm |
| Torque | 1717 Lb-In |
| Uncertainty K1 (Vibration) | 1.5 |
| Variable Speed | Yes |
Item#:
DCF809C2
Manufacturer Item:
DCF809C2
Your Price:
168.99
Each
Features
- STRONG PERFORMANCE: Up to 250 ft-lbs of max tightening torque and 400 ft-lbs of max breakaway torque
- ACCESS HARD-TO-REACH WORKSPACES with its compact size
- QUICKLY CHANGE SOCKETS: Hog ring anvil for rapid, secure socket changes
- BRIGHTEN DARK WORK AREAS with on-board LED ring
Specifications
| Height | 12.677 in |
| Length | 9.800 in |
| Width | 3.300 in |
| Weight | 7.266 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 1.4 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Watt Hours | 100 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Case Type | Soft |
| Drive Size | 1/2 in |
| Forward And Reverse Switch Included | Yes |
| Housing Material | Plastic |
| Impacts / Blows / Blasts Per Min | 3150 |
| Individual Vs. Set (Syndigo) | SET |
| Maximum Speed | 2850 RPM Rpm |
| Maximum Torque Ft/Lbs. | 250 |
| Minimum Torque | 250 Ft-Lbs |
| Variable Speed | Yes |
Item#:
DCF911P2
Manufacturer Item:
DCF911P2
Your Price:
389.99
Each
Specifications
| Height | 3.750 in |
| Length | 12.500 in |
| Width | 9.813 in |
| Weight | 5.500 lbs |
| MAXIMUM SPEED | 2300 RPM |
Item#:
DCF880M2
Manufacturer Item:
DCF880M2
Your Price:
267.99
Each
Take on a variety of fastening projects using the 20V MAX 3/8 in. Cordless Impact Wrench with Hog Ring Anvil Kit. The high-output Impact Wrench delivers the power needed for both large and small jobs with up to 250 ft-lbs of tightening torque and 400 ft-lbs of breakaway torque. Its compact, lightweight build was engineered for seamless maneuverability in tight spots. Dimly lit work conditions are no problem for this Cordless Impact Wrench, which features an on-board LED for visibility in dark spaces.
Features
- STRONG PERFORMANCE: Up to 250 ft-lbs of max tightening torque and 400 ft-lbs of max breakaway torque
- ACCESS HARD-TO-REACH WORKSPACES with its compact size
- QUICKLY CHANGE SOCKETS: Hog ring anvil for rapid, secure socket changes
- BRIGHTEN DARK WORK AREAS with on-board LED ring
Specifications
| Height | 12.677 in |
| Length | 9.700 in |
| Width | 3.900 in |
| Weight | 7.266 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 2 |
| Battery Weight | 1.4 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Watt Hours | 100 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Drive Size | 3/8 in |
| Individual Vs. Set (Syndigo) | SET |
Item#:
DCF913P2
Manufacturer Item:
DCF913P2
Your Price:
388.00
Each
The DEWALT DCF897P2 20v MAX XR High Torque 1/2-inch Impact Wrench w. Hog Ring Retention Pin Anvil (5.0 Ah) offers premium performance for fastening and breakaway; Up to 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque. With best in class ergonomics for comfortable use, this Impact Wrench has a compact design of 8-13/16-inch in length and weighs only 7.2 lbs. It features multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM), with an efficient motor design that allows for optimum runtime and variable speed settings. DEWALT impact wrench has a 3/4-inch hog ring with retention pin anvil, along with a LED light with 20 second delay for increased visibility in dark work areas. Kit includes: (1) DCF897 - 20v MAX XR Brushless High Torque 3/4-inch Impact Wrench with Hog Ring Anvil - Tool, (2) DCB205 - 5.0 Ah batteries, (1) Multi voltage charger.
Specifications
| Height | 10.188 in |
| Length | 15.188 in |
| Width | 5.750 in |
| Weight | 11.800 lbs |
| MAXIMUM SPEED | 1900 RPM |
Item#:
DCF897P2
Manufacturer Item:
DCF897P2
Your Price:
507.99
Each
Specifications
| Height | 9.813 in |
| Length | 12.500 in |
| Width | 3.600 in |
| Weight | 4.500 lbs |
| MAXIMUM SPEED | 2800 RPM |
Item#:
DCF787C1
Manufacturer Item:
DCF787C1
Your Price:
169.99
Each
The 20V MAX XR brushless cordless 1/4 sheet variable speed sander provides you with the power and runtime needed to get the job done. A variable-speed dial provides speed control from 8,000 - 14,000 OPM for a variety of jobs. One-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors (sold separately). Rubber overmold grip provides comfortable sanding. Paper clamp designed to hold paper securely and for ease of installation. Battery and charger sold separately.
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 " 14,000 OPM to match the speed to the application
- Low profile height allows user to get close to work surface for precise sanding
- Paper clamp designed to hold paper securely and allow for easy installation
- Dust-sealed switch to protect against dust ingestion for long switch life
- Texturized rubber overmold grip for comfortable sanding
- One-handed locking dust bag
- Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors (sold separately)
- To attach dust port to other vacuum systems with 1-1/4 in. hoses, use DWV9000 universal quick connector (sold separately)
- Long dust chute (not included) Part Number N684701 for use with 6 Ah batteries and larger
Specifications
| Height | 6.317 in |
| Length | 9.442 in |
| Width | 6.220 in |
| Weight | 2.930 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | Sanding wood with 120 grit sandpaper (sold separately), dust bag and DCB205 5Ah Battery (sold separately) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA safety listing |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Bare Tool | Yes |
| Case Type | No Case Included |
| Dust Collection | Yes |
| Dust Collection Component | Bag |
| Electronic Speed Control | Yes |
| Engine | Brushless |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 14000 RPM Rpm |
| Pad Size | 1/4 Sheet |
| Variable Speed | Yes |
Item#:
DCW200B
Manufacturer Item:
DCW200B
Your Price:
151.99
Each
Features
- Next generation 11 amp AC/DC 11,000 rpm motor provides the best power to weight/size ratio available
- Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool
- Over-sized brushes provide 2 times the brush life of the previous model (D28402)
- Large spiral bevel gear provides long transmission life
- One-TouchGuard allows for 360-degree rotation of the guard with a single action
- Quick-Change wheel release allows tool-free wheel removal without need for a wrench
- Top-mounted and protected spindle lock button maximizes depth-of-cut without compromising durability
- Uniquely small gripping surface in this power class allows for the best comfort available in this class
- Newly designed side handle provides excellent ergonomics
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Specifications
| Height | 4.875 in |
| Length | 15.250 in |
| Width | 6.125 in |
| Weight | 6.350 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Voltage | 120 V V |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Watt Hours | 1400 |
| Amperage | 11 |
| Battery Required | No |
| Cord Length | 6 Ft |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| Arbor Size | 5/8 -11 UNC |
| Bare Tool | Yes |
| Case Type | No Case Included |
| Design Type | Angle |
| Electronic Speed Control | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Kit | No |
| Maximum Speed | 11000 RPM Rpm |
| Overload Protection | No |
| Switch Type | Paddle |
| Variable Speed | No |
| Wheel Diameter | 4.5 in In. |
Item#:
DWE402
Manufacturer Item:
DWE402
Your Price:
102.59
Each
Features
- 6.1J's of impact energy provides the power to drill fast in the hardest of concrete
- Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- Horizontal serial drilling
Specifications
| Height | 5.300 in |
| Length | 22.800 in |
| Width | 18.700 in |
| Weight | 20.900 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Voltage | 120 V V |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Amperage | 10.5 |
| Cord Length | 8 Ft |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| Claims Needed | No |
| Case Type | Case |
| Chipping | Yes |
| Chuck Capacity | 1-9/16" |
| Chuck Size | SDS-Max |
| Chuck Type | SDS-Max |
| Handle Type | D-Ring |
| Housing Material | Plastic |
| Impact Energy | 6.1 Joules |
| Impacts / Blows / Blasts Per Min | 3150 |
| Individual Vs. Set (Syndigo) | SET |
| Keyless/Keyed | Keyless |
| Maximum Speed | 540 RPM Rpm |
| Reversible | Yes |
| Side Handle Included | Yes |
| Thin Wall Bit Capactiy | Yes |
| Uncertainty K1 (Vibration) | 1.5 |
| Variable Speed | Yes |
Item#:
D25481K
Manufacturer Item:
D25481K
Your Price:
448.99
Each
Features
- 3.0 joules impact energy for fast drilling and chipping speed
- 8.5 amp high performance motor
- Shocks - Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature
- Rotating brush ring delivers full power/torque in forward and reverse
- Integral clutch reduces sudden, high torque reactions if bit jams
- 2 Year Free Service
- Compatible with D25301D drilling dust extraction system
Specifications
| Height | 4.900 in |
| Length | 18.750 in |
| Width | 14.380 in |
| Weight | 11.700 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Motor Type | Brushed |
| Voltage | 120 V V |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Charger Included | No |
| Amperage | 8.5 |
| Cord Length | 8 Ft |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| Case Type | Case |
| Chuck Capacity | SDS-Plus |
| Chuck Size | 1-1/8 in |
| Chuck Type | SDS-Plus |
| Electronic Speed Control | No |
| Engine | Brushed |
| Handle Type | D-Ring |
| Housing Material | Plastic |
| Impact Energy | 3.0 Joules |
| Impacts / Blows / Blasts Per Min | 5350 |
| Individual Vs. Set (Syndigo) | SET |
| Keyless/Keyed | Keyless |
| Maximum Capacity Steel | 0.5 In |
| Maximum Capacity Wood | 0.5 In |
| Maximum Speed | 1450 RPM Rpm |
| Reversible | Yes |
| Side Handle Included | Yes |
| Thin Wall Bit Capactiy | No |
| Tool Power Output | 700 UWO |
| Uncertainty K1 (Vibration) | 1.5 |
| Variable Speed | Yes |
Item#:
D25263K
Manufacturer Item:
D25263K
Your Price:
244.99
Each
The DEWALT DWE43113 4-1/2" - 5" high performance trigger grip Grinder is powered by a 13 amp motor and equipped with the dust Ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. It has a side handle for an alternative grip, along with a 5" type 27 guard. This Grinder also features a trigger switch with a 'lock-on' option the no-load speed at 9000 RPM, with inner and outer flanges. Specs: wheel diameter = 5", Spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5.1 lbs. Backed by DEWALT'S 3 year limited warranty. Includes: 1) Grinder, 1) 5" type 27 guard, 1) side handle, inner and outer flanges.
Features
- 13 Amp motor
- 5-In type 27 guard
- Dust ejection system technology to protect the tool from damaging dust and debris
- Inner and outer flanges
- Trigger switch with lock-on option
Specifications
| Height | 5.125 in |
| Length | 19.750 in |
| Width | 6.125 in |
| Weight | 6.850 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Voltage | 120 V V |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Amperage | 13 |
| Cord Length | 6 Ft |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Adjustable Handle | Yes |
| Arbor Size | 5/8 -11 UNC |
| Case Type | No Case Included |
| Electronic Speed Control | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Lock-On Switch | No |
| Maximum Speed | 9000 RPM Rpm |
| Overload Protection | Yes |
| Replaceable Brushes | Yes |
| Spindle Lock | Yes |
| Switch Type | Trigger |
| Variable Speed | No |
| Wheel Diameter | 4.5 in - 5 in In. |
Item#:
DWE43113
Manufacturer Item:
DWE43113
Your Price:
165.99
Each
Features
- Next Generation 11 Amp AC/DC 11,000 rpm motor provides the best power to weight/size ratio available
- Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool
- Oversized brushes provides 65% longer brush life over previous model (D28402)
- Large spiral bevel gear provides long transmission life
- One-TouchGuard allows for 360-degree rotation of the guard with a single action
- Quick-Change Wheel Release allows tool free wheel removal without need for a wrench
- Top-mounted and protected spindle lock button maximizes depth of cut without compromising durability
- Uniquely small gripping surface in this power class allows for the best comfort available in this class
- Newly-designed side handle provides excellent ergonomics
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Specifications
| Height | 4.875 in |
| Length | 15.250 in |
| Width | 6.125 in |
| Weight | 6.250 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Corded |
| Voltage | 120 V V |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Watt Hours | 1400 |
| Amperage | 11 |
| Cord Length | 6 Ft |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | CSA Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Adjustable Handle | Yes |
| Arbor Size | 5/8 -11 UNC |
| Case Type | No Case Included |
| Electronic Speed Control | No |
| Handle Type | 2-position side handle |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 11000 RPM Rpm |
| Overload Protection | Yes |
| Replaceable Brushes | No |
| Spindle Lock | Yes |
| Switch Type | Paddle |
| Variable Speed | No |
| Wheel Diameter | 4.5 in In. |
Item#:
DWE402N
Manufacturer Item:
DWE402N
Your Price:
102.59
Each
Includes
- Carbide Blade
- Push Stick
- Blade Guard
- Rip Fence
- Non-Thru Cut Riving Knife
- FLEXVOLT 20V/60V MAX Battery
- Fast Charger
- (2) Blade Wrenches
- Miter Gauge
- DCS7485 60V MAX Table Saw
Features
- Rack and pinnion telescoping fence rails make fence adjustments smooth and accurate
- 24 in. of rip capacity for ripping 4x8 plywood or OSB sheets
- Run off of FLEXVOLT 20V/60V MAX battery system for maximum portability
- Site-Pro Modular Guarding System allows for tool free adjustment of the guarding
Specifications
| Height | 26.62 IN |
| Length | 26.25 IN |
| Width | 13.88 IN |
| Weight | 56.7 LB |
| Type | BENCH & STATIONARY: TABLE SAWS |
| Battery Included | Yes |
| Battery Quantity | 1 |
| Charger Type | Jack Plug |
| Motor Type | Brushless |
| Voltage (V) | 60 V |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 and 60 volts. Nominal voltage is 18 and 54. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Diameter | 0.81 IN |
| Bare Tool (Y/N) | No |
Item#:
DCS7485T1
Manufacturer Item:
DCS7485T1
Your Price:
579.99
Each
At less than 4 in. in length, the Atomic 20V MAX 1/4 in. Brushless Cordless 3-Speed Impact Driver can handle tight applications like narrow cabinetry or framing without the need for an additional tool. Though the Impact Driver is lightweight and compact in size, it does not sacrifice performance with its brushless motor that delivers up to 1,825 in-lb. of torque and 3,250 rpm for driving large-diameter screws. Illuminate dim workspaces for enhanced visibility with the 3-LED on-board work light and keep your workflow consistent.
Features
- MANEUVER WITH EASE: Compact, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- HIGH-PERFORMANCE BRUSHLESS MOTOR delivers 1,825 in-lb. of torque and 3,250 rpm to drive large-diameter screws
- PRO-LEVEL CONTROL and precision with a variable 3-speed trigger
- BRIGHTEN DARK WORK AREAS: Integrated 3-LED work light enhances visibility in dimly lit spaces
Specifications
| Height | 8.375 in |
| Length | 4.800 in |
| Width | 3.375 in |
| Weight | 2.400 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 1 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Net Lit-Ion Y/N | Yes |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Hazmat | Li-Ion (<101 WH) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LM |
| Certifications Or Listings | CSA Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| Chuck Size | 1/4 in |
| Drive Size | 1/4 in Hex |
| Housing Material | Plastic |
| Impacts / Blows / Blasts Per Min | 3800 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Kit | Yes |
| Maximum Speed | 3250 RPM Rpm |
| Maximum Torque | 1825 In-Lbs |
| Maximum Torque Ft/Lbs. | 300 |
| Torque | 1825 Lb-In |
| Variable Speed | Yes |
Item#:
DCF850B
Manufacturer Item:
DCF850B
Your Price:
149.99
Each
Stay productive on the jobsite with the 20V MAX Brushless Cordless 7/16 in. Compact Quick Change Stud and Joist Drill with FLEXVOLT ADVANTAGE. Conveniently swap bits mid-job with little time lost using the 7/16 in. hex quick change chuck. do not worry about bind-up situations, this drill uses anti-rotation E-Clutch technology to detect the motion of the tool and shut it down if necessary. You can spend less time recharging and more time working as you drill up to 495 7/8 in. holes per charge with the stud and joist drill. This power tool is compatible with DEWALT FLEXVOLT battery packs, which were designed to enhance your tool's performance and output. Battery and charger sold separately.
Features
- E-CLUTCH System shuts the tool down if necessary, in a bind up situation
- Up to 83% more powerful when using a DCB609 pack
- Quick bit changes with 7/16 in. hex quick change chuck
- Convenience and capacity: drill up to a 4 in. with a hole saw and a 2-9/16 in. with a self-feed bit
- Track and locate with Tool Connect app: installing a DEWALT Tool Connect chip allows for monitoring and pinpointing of the drill location on the jobsite
- Designed for high productivity: drill up to 495 holes with a 7/8 in. auger bit on a single charge
Specifications
| Height | 8.700 in |
| Length | 5.500 in |
| Width | 18.500 in |
| Weight | 10.700 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. | ** Using a DCB609 FLEXVOLT battery vs. DCB205 20V MAX* Battery (Battery sold separately) | *** The DEWALT DCD445B can drill up to 495 holes in 2 in. SPF wood using 7/8 in. auger bit per charge when used with DCB609 FLEXVOLT battery (sold separately) |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Bare Tool | Yes |
| Case Type | No Case Included |
| Chuck Size | 7/16 in |
| Chuck Type | Quick Connect |
| Engine | Brushless |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Keyless/Keyed | Keyless |
| Maximum Speed | 1250 RPM Rpm |
| Overload Protection | Yes |
| Reversible | Yes |
| Variable Speed | Yes |
Item#:
DCD445B
Manufacturer Item:
DCD445B
Your Price:
299.99
Each
Includes
- No Additional Items Included
Features
- DEWALT screw gun has high power motor for metal fastening applications
- Excellent ergonomics offers less user fatigue
- Helical-cut steel and heat-treated gears for long life and durability of the screw gun
- Metal nose and gear case for durability on the job
Specifications
| Height | 3.000 IN |
| Length | 12.000 IN |
| Width | 10.250 IN |
| Weight | 4.700 LB |
| Type | SCREW GUN |
| Battery Included | No |
| Voltage (V) | 120 V |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Diameter | 0.02 |
| Finish | Yellow/Black |
| Material Group | METAL |
Item#:
DW268
Manufacturer Item:
DW268
Your Price:
218.99
Each
Features
- Brushless motor requires no brush changes
- Brake stops wheel in 2 seconds or less on average using DWA8914 wheel
- The electronic Kickback Brake engages with maximum force when a pinch, stall, or bind-up event is sensed, quickly stopping the wheel, reducing the movement of the grinder, and shutting off the motor
- POWER-LOSS RESET- The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool
Includes
- Grinder
- Side Handle
- Hex Key
- Inner and Outer Flange
- 5 in Type 27 Guard
Specifications
| Height | 5.230 IN |
| Length | 16.890 IN |
| Width | 6.140 IN |
| Weight | 6.550 LB |
| Type | ANGLE GRINDER |
| Battery Included | No |
| Motor Type | Brushless |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Bare Tool (Y/N) | Yes |
Item#:
DWE43214
Manufacturer Item:
DWE43214
Your Price:
219.99
Each
Features
- Fully hardened steel body delivers increased life and durability.
- Bulk packs of 10 or 15 available for the most common products.
Specifications
| Height | 12.700 IN |
| Length | 1.840 IN |
| Width | 1.840 IN |
| Weight | 2.560 LB |
| Type | CHISELS: BUSHING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Warranty | 30DLW |
| Primary Material | High Speed Steel |
| Unit Of Measure | SAE |
Item#:
DW5843
Manufacturer Item:
DW5843
Your Price:
57.99
Each
Specifications
| Type | WRENCHES: IMPACT |
| Battery Included | No |
| Voltage (V) | 20 V |
| Prop 65 Generic Warning | Yes |
Item#:
DCF961B
Manufacturer Item:
DCF961B
Your Price:
369.99
Each
The DeWALT DWMT81611T 3/8 in. Nano Mech Tool Set includes 72 tooth count ratchets which allow for a 5 degree arc swing for maneuverability in restricted areas. The knurled beauty rings help reduce slippage for hand tightening applications. This durable tool set has DirectTorque technology to help prevent rounding of fasteners and provides a strong grip. The DeWalt nano mech tool set has a full polish chrome finish for corrosion resistance. This high-quality tool set is backed with a full lifetime warranty.
Features
- Knurled beauty rings help reduce slippage for hand tightening applications
- DeWalt nano mech tool set meets or exceeds ASME specifications
- DirectTorque technology to help prevent rounding of fasteners
Specifications
| Height | 2.200 IN |
| Length | 15.600 IN |
| Width | 12.300 IN |
| Weight | 5.664 LB |
| Type | SOCKETS: BIT SOCKETS |
| Net Lit-Ion Y/N | No |
| Warranty | FLW |
| Unit Of Measure | SAE |
Item#:
DWMT81611T
Manufacturer Item:
DWMT81611T
Your Price:
62.99
Each
Features
- Matrix II High Speed Steel Edge for Heat and Wear Resistance
- 8% Cobalt Content For Added Durability & Wear
- Rc 65-67 Tooth Hardness For Increased Wear Resistance
- Alloy Steel Backer for Fatigue Resistance
Specifications
| Height | 14.000 in |
| Length | 5.250 in |
| Width | 0.875 in |
| Weight | 0.350 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Charger Included | No |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| Blade Cutting Material | High Speed Steel |
| Blade Length | 44.875 In |
| Blade Material | High Speed Steel |
| Blade Qty | 3 |
| Blade Stroke Length | 44.875 In |
| Blade Tooth Spacing | No |
| Blade Type | Band Saw |
| Blade Width | 0.5 |
| Compatibility | Band Saws |
| Cuts Into | Metal |
| Individual Vs. Set (Syndigo) | SET |
| Number Of Teeth | 808 |
| Teeth Per Inch | 24 |
| Thickness | 0.02 In |
Item#:
DW3984C
Manufacturer Item:
DW3984C
Your Price:
32.89
Each
Features
- Galvanized coating with a 2,500 nails come in each pack with 100 nails per stick.
Specifications
| Height | 1.750 in |
| Length | 5.625 in |
| Width | 3.688 in |
| Weight | 3.750 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | MWC |
| Claims Needed | No |
| Collation | Glue |
| Crown Size | 0.25 in In |
| Fastener Type | Staple |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Staple Type | 1/4" Crown |
| Use Location | Finishing |
Item#:
DNS18150-2
Manufacturer Item:
DNS18150-2
Your Price:
10.59
Each
Features
- Power - Brushless motor provides 5500rpm and maintains speed under load
- Runtime - 330 cross cuts in a 2x4 (pine)
- Capacity - 7-1/4" Blade provides 2-9/16" depth of cut
- Ease of Use - Bevel capacity up to 57 degrees
Specifications
| Height | 11.200 in |
| Length | 15.500 in |
| Width | 12.350 in |
| Weight | 13.720 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 1 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Jack Plug |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Hazmat | Li-IonBatt <101 WH |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Hazmat Code | A1 |
| Adjustable Depth | Yes |
| App Compatibility | No |
| Arbor Size | 0.625 |
| Bevel Capacity | 57 |
| Bevel Stop | No |
| Blade Diameter | 7 1/4 in In. |
| Blade Location | Left |
| Blade Qty | 1 |
| Blade Wrench | Yes - Loose |
| Bluetooth Compatibility | No |
| Brake | Yes |
| Case Type | N/A (no case) |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | No |
| External Motor Brush Access | Brushless Motor |
| Fence Included | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | SET |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Not Featured |
| Integrated Work Light | Yes |
| Maximum Cut Depth @ 45 Deg. | 2" |
| Maximum Cut Depth @ 90 Deg. | 2-9/16" |
| Maximum Speed | 5200 RPM Rpm |
| Saw Drive Type | Direct Drive |
| Shoe Material | Aluminum |
| Spindle Lock | No |
| Variable Speed | No |
| Wifi Compatibility | No |
| Works With Android | No |
| Works With Ios | No |
Item#:
DCS570P1
Manufacturer Item:
DCS570P1
Your Price:
331.99
Each
Features
- Powerful 5150 rpm motor delivers power and speed to make the most demanding cuts with ease
- High strength and lightweight magnesium shoe provides job-site durability for long-term cut accuracy
- Optimized rubber overmolded comfort grip delivers optimal balance and control
- 0-50° bevel capacity allows for aggressive bevel cuts for a multitude of applications
- 6-1/2 in. carbide-tipped blade for cutting 2 times material at 90° and 45° and more cuts per charge
- 20V MAX Lithium Ion 5.0 AH battery
Specifications
| Height | 8.750 in |
| Length | 15.870 in |
| Width | 12.000 in |
| Weight | 12.450 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushed |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 1 |
| Battery Weight | 1.4 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 5 Ah Ah |
| Watt Hours | 100 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | Yes |
| File/Certification Number (Lowes Required) | TBD/Transition |
| Hazmat Code | A1 |
| Adjustable Depth | No |
| App Compatibility | No |
| Arbor Size | 0.625 |
| Bevel Capacity | 50 |
| Bevel Stop | Yes |
| Blade Diameter | 6 1/2 in In. |
| Blade Location | Left |
| Blade Qty | 1 |
| Blade Wrench | No |
| Bluetooth Compatibility | No |
| Brake | No |
| Case Type | Case |
| Dust Blower | No |
| Dust Collection | No |
| Dust Port | No |
| External Motor Brush Access | No |
| Fence Included | No |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | SET |
| Integrated Laser Guide | No |
| Integrated Rafter Hook | Not Featured |
| Integrated Work Light | Yes |
| Maximum Cut Depth @ 45 Deg. | 1.625 |
| Maximum Cut Depth @ 90 Deg. | 2.125 |
| Maximum Speed | 5150 RPM Rpm |
| Saw Drive Type | Direct Drive |
| Shoe Material | Metal |
| Spindle Lock | Yes |
| Variable Speed | Yes |
| Wifi Compatibility | No |
| Works With Android | No |
| Works With Ios | No |
Item#:
DCS391P1
Manufacturer Item:
DCS391P1
Your Price:
269.99
Each
This 20V MAX XR in. 3-Speed Impact Driver is lightweight yet powerful with a brushless motor that delivers 1,825 in-lbs. of max torque to drive large diameter screws. The 3-speed switch allows for increased user control and precision for various applications to help maximize versatility on the jobsite. Maintain productivity in low-light spots with a 3-LED on-board work light that helps to illuminate dimly lit workspaces. This cordless impact driver comes Chip Ready (chip sold separately) to track the tool's location with the DEWALT TOOL CONNECT Site Manager App
Includes
- DCF845 20V MAX XR 1/4 in. 3-Speed Impact Driver
- (2) DCB205 20V MAX 5.0 Ah Batteries
- Belt Hook
- Charger
- Kit Bag
Features
- BRUSHLESS MOTOR delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws
- COMPLETE TOUGH FASTENING APPLICATIONS on the jobsite with 30% more torque
- PRO-LEVEL CONTROL and precision with variable speed trigger and 3-speed setting
- BRIGHTEN WORK AREAS with an integrated 3-LED work light for ehnanced visibility in low-light areas
Specifications
| Height | 9.438 IN |
| Length | 12.500 IN |
| Width | 4.125 IN |
| Weight | 7.000 LB |
| Type | DRILLS: IMPACT DRIVER |
| Battery Included | Yes |
| Battery Quantity | 2 |
| Battery Weight | 1.4 |
| Charger Included (Y/N) | Yes |
| Voltage (V) | 20 V |
| Watt Hours | 200 |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | Rated Torque vs. DCF885 Impact Driver with Rated Torque of 1400 in-lbs |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Bare Tool (Y/N) | No |
Item#:
DCF845P2
Manufacturer Item:
DCF845P2
Your Price:
299.99
Each
The ATOMIC 20V MAX 1/2 in. Cordless Impact Wrench with Detent Pin Anvil was designed to easily handle a wide variety of construction and assembly applications. Take advantage of up to 300 ft-lbs of max fastening torque and 450 ft-lbs of max breakaway torque in a compact design that you can quickly maneuver from spot to spot. This power tool allows the user to choose between 4 speeds while the Precision Wrench control feature and Timber Screw mode enhance its versatility, performance, and operability. Illuminate dimly lit work areas with this Cordless Impact Wrench's on-board LED work light and continue working even in dark spaces.
Features
- STRONG PERFORMANCE: Up to 300 ft-lbs of max fastening torque and 450 ft-lbs of max breakaway torque
- ENHANCED USER CONTROL in a variety of applications with 4 speed settings
- HELPS PREVENT OVERTIGHTENING and fastener run-off with Precision Wrenchcontrol
- BRIGHTEN DARK WORKSPACES with onboard LED and brightness control
Includes
- (1) DCF922 Impact Wrench
- (1) Belt Clip
Specifications
| Height | 3.346 IN |
| Length | 9.055 IN |
| Width | 5.748 IN |
| Weight | 3.042 LB |
| Type | WRENCHES: IMPACT |
| Battery Included | No |
| Charger Included (Y/N) | No |
| Motor Type | Brushless |
| Voltage (V) | 20 V |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Primary Material | GFN |
| Bare Tool (Y/N) | Yes |
Your Price:
219.99
Each
Features
- Helical-cut steel, heat-treated steel gears for long life and durability
- Metal gear housing for jobsite durability and increased reliability
- Two-finger trigger for increased comfort
- 360-degree side handle for greater control and versatility
Includes
- Chuck Key With Holder
- 360° side handle
Specifications
| Height | 3.190 IN |
| Length | 10.190 IN |
| Width | 12.250 IN |
| Weight | 5.790 LB |
| Type | DRILLS: COMPACT |
| Battery Included | No |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
Item#:
DW235G
Manufacturer Item:
DW235G
Your Price:
143.99
Each
Includes
- DCF887 20V MAX XR 1/4" Impact Driver
- (2) DCB205 20V MAX XR High Capacity Li-Ion Batteries (5.0Ah)
- Charger
- (2) Belt hooks
- 360° side handle
- Kit Box
- DCD996 20V MAX XR 3-Speed 1/2" Hammerdrill
Features
- DCD996 20V MAX 1/2" hammerdrill 3-speed, high performance (0-2,250 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time
- DCD996 20V MAX 1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials
- DCD996 20V MAX 1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lbs) design to fit tight areas
- DCD996 20V MAX hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model
Specifications
| Height | 5.25 IN |
| Length | 14.9 IN |
| Width | 14.5 IN |
| Weight | 14.15 LB |
| Type | COMBO KITS: POWER TOOLS |
| Battery Included | Yes |
| Battery Quantity | 2 |
| Charger Included (Y/N) | Yes |
| Charger Type | Jack Plug |
| Motor Type | Brushless |
| Net Lit-Ion Y/N | Yes |
| Voltage (V) | 20 V |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Piece Count | 2 |
| Finish | Yellow/Black |
Your Price:
379.99
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
