S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Home
>
Cordless Power Tools
>
Cordless Nail Guns
> DEWALT 20V MAX* 15 Degree Cordless Coil Roofing Nailer Kit
DEWALT 20V MAX* 15 Degree Cordless Coil Roofing Nailer Kit
Item #:
DCN45RND1
Manufacturer Item: DCN45RND1
Ideal for service repairs and small jobs, this 20V MAX 15 degree Cordless Coil Roofing Nailer delivers cordless convenience. There are absolutely no hoses, compressors, or gas cartridges required. its 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15 degree Cordless Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that...
433.99
Each
Quantity:
Ideal for service repairs and small jobs, this 20V MAX 15 degree Cordless Coil Roofing Nailer delivers cordless convenience. There are absolutely no hoses, compressors, or gas cartridges required. its 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15 degree Cordless Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.
Features
- Brushless motor for increased runtime and durability
- Bump mode for efficiency and productivity
- Tool-free nail tray easily adjusts to accommodate the full range of roofing nails
- Tool-free depth adjustment wheel for precise nailing
- Tool-free stall release lever to return driver blade in event of a jam
- Belt hook for convenience
- 15° canister holds up to 120 wire collated roofing nails
- Ergonomic handle design for better control and comfort
- Fires up to 3 nails per second on a 2 Ah Battery
- Up to 500 nails per charge
Specifications
| Height | 12.567 in |
| Length | 18.504 in |
| Width | 6.063 in |
| Weight | 11.700 lbs |
| Power Source | Battery |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX* Lithium Ion |
| Battery Qty | 1 |
| Battery Weight | 0.8 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 2 Ah Ah |
| Watt Hours | 40 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Charge Time | 60 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Disclaimer | * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. | ** In asphalt roofing shingles and ½" plywood, using DCB203 2 Ah battery | 4 nails per shingle, using DCB203 2 Ah battery | Roofing pros can save up to 20 minutes daily in set-up and clean-up time by switching from a pneumatic nailer to a DEWALT battery-powered roofing nailer |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | ANSI Safety Listing | UL Listed |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Adjustable Depth | Yes (Tools Not Required) |
| Air Inlet Size | 0.0 In |
| Bare Tool | No |
| Case Type | Bag |
| Engine | Brushed |
| Fastener Format | Coil |
| Fastener Length | 1.75 |
| Firing Mode | Full Sequential |
| Housing Material | Plastic |
| Individual Vs. Set (Syndigo) | SET |
| Integrated Work Light | Not Featured |
| Kit | Yes |
| Loading Type | Coil |
| Maximum Fastener Size | 1-3/4 in |
| Maximum Length | 1.75 In |
| Minimum Fastener Size | 3/4 in |
| Multi-Purpose | Single Purpose |
| Nail Gauge | NA |
| Nail Gun Angle | 15 degree |
| Nailer Features | No Features |
| Nails Per Charge | 500 |
| Range | Straight |
